So when customers ask us how many ‘Watts” do I need to replace an existing light source, we always convert them to lumens.

•  Pay special attention to the lumens per watt of a fixture. IT DOES MATTER. A LED product at 135 lumens/watt will consume far less energy than a LED product producing 97 lumens/watt. Not all LED solutions are the same. (remember, always buy on the lumens you need, never on the watts you think you need.).

•  To calculate lumens per watt, take the total number of lumens a product produces and divide it by the watts it consumes.

For indoor fixtures, figure on:

utility company. You can check if a product is DLC Qualified on the DesignLights Consortium website. DLC has rebates for Commercial LED Lighting and Industrial LED Lighting

•  Rebates with DLC Premium should be higher than rebates with DLC Standard. Your utility company is typically who provides the rebates and sets the rebate amounts.  Check their website.

•  All UL Listed or ETL Listed.

•  Replacing the light parts of an existing fixture with the a Retrofit unit will not void the UL/ETL Listing of the fixture. However, the exception to this rule are explosion proof rated fixtures (ie. Class I Div 2). Never retrofit a certified explosion proof fixture. UL1598C does not cover these types of retrofits.

•  ETL Listing is the same as UL Listing. They perform the same test, and the certification is the same. The only difference is that the company who performs the test.

Anytime you notice something strange happening with your heating system, you should probably call a professional to look at it. Better to be overly cautious than to have your heater suddenly break down on you. However, there are some conditions which need to be dealt with without delay. As soon as you notice these emergency conditions, you need to call a professional immediately. Let’s take a look at some of the times that you should call for emergency call FB Electrical Services. We provide emergency heating repair throughout the Boston area.

Mortgage lenders try to look at the big picture, considering things like taxes and insurance when deciding how much they can loan out to homeowners and buyers. However, there's a major ongoing expense that appraisers currently don't take into account – monthly utility bills. You don't need to be an electrician to understand that the money you pay for power each month makes an impact on your budget and even affects the value of your home. A bill currently in front of Congress – the SAVE Act – would acknowledge that reality and let federal mortgage lenders make energy efficiency part of their formula.

Increasing the Value of Your Home

Essentially, the SAVE Act would make it easier to get financing for efficiency upgrades, even folding funding for it into traditional mortgages.

“This bill would require federal mortgage agencies to recognize the energy efficiency upgrades in a home during the mortgage underwriting process, thereby increasing the value of the home,” President of the Alliance to Save Energy Kateri Callahan said in a statement. 

The SAVE Act claims it would bring a number of benefits in addition to loosening the drawstrings on bank financing for efficiency. Among them:

A Diverse Group of Supporters

The SAVE Act was first introduced in 2013. Although Congress has yet to vote on the measure, it has lined up a diverse group of supporters who aren't typically on the same side of major issues, from the U.S. Chamber of Commerce and the National Association of Manufacturers to the Alliance to Save Energy, the National Resources Defense Council, the U.S. Green Building Council and others.

In the meantime, there are a number of steps you can take around your home today to cut down on your utility bills. If you need any help installing efficient appliances or upgrading your home electric system, contact an expert electrician today.

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save