Almost 2/3rd of Americans decorate there home with some sort of electric lights during the holiday season.  Over half require the use of some sort of extension cord and or power splitter during there holiday lighting decoration process.  The National Fire Protection Association (NFPA) Reports that Christmas tree fires alone cause on average an estimated $16.2 million in direct property damage, 16 injuries, and 6 deaths every year.  This statistic does not include injures or deaths due to outdoor lighting electric shock or fall injuries such as ladder work.

Using interweaving print technology, each image is printed on an LED panel light lens using eight rows of 180 ink nozzles that prevent any horizontal banding or visual imperfections. While the lens is being printed, a UV light cures and dries the image as it exits the printer. Printing time varies per lens size; a 2-foot-by-4-foot lens typically requires 15-17 minutes from start to finish.

A safety switch is essentially a device that very quickly switches-off the electricity in case any electrical fault is detected. In effect, it reduces the risk of injury & death caused by contact with electricity. Current day safety switches are very different from the ones used even up until a decade ago. Today, it’s mandatory to have these installed in buildings where any kind of electrical addition or upgrade has taken place.

Apart from this, safety switches are also needed for power outlets that that supply electricity to mobile homes like caravans etc. It’s not mandatory to have these safety switches in older homes; however, the recommendation is that you should consider getting them installed. It is one of the most effective ways to protect your family & yourself from electric shock.

ELCBs or Earth-leakage circuit breakers are safety devices used to prevent shock in electrical fixtures which have high Earth impedance. The current installations use the circuit breakers that directly detect leakage in current. Here are some features of an ELCB:

RCDs or RCCBs are essentially modern electrical wiring devices which quickly disconnect a circuit if they detect that there is an imbalance in the current between the energized conductor/s & the return conductor. They are designed to immediately switch-off the electricity supply when the electricity leaking to earth is detected to be at harmful levels. These devices offer very high levels of protection from electric shock.

Voltage Earth-leakage circuit breakers were first introduced around 60 years ago, while the current ELCBs were launched only around 40 years ago. For a very long time, voltage-operated ELCBs & differential current-operated ELCBs were both called ELCBs; this was because it was a far easier term to remember. However, as expected, this common name caused a significant amount of confusion within the electrical industry.

If someone accidently used the wrong one in a particular application, the installations may not get the kind of protection it needed. It was to eliminate this confusion that the International Electrotechnical Commission decided that the differential current-operated ELCBs will be termed as RCD (residual current devices). Any current that’s over & above the load current is referred to as the residual current.

ELCBs have a number of disadvantages such as:

Today the RCD is preferred means of providing effective shock protection. The term is also most widely used across the globe.

For more information about RCDs and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263