Office spaces are a place for color temperature of 5600k, we don’t need to quite match this. A level between 5000k to 6000k will do fine for an office environment to prevent sleepiness.

Exposure to non-artifical light (aka, natural light from the sun) is known to this post by luxreview.com that should lead you in the right direction.

From there, ensuring you know all of the rules in your area will be the best route to ensuring you aren’t breaking any laws with an improper lighting system. The added benefit to following these rules is you can drastically reduce any possible liabilities you may incur if you had otherwise ignored these rules. So, we find it best to follow them!

Additional considerations

Not only are the above tips important to consider, but strongly considering LED office light technology can prove to supply the above benefits along with the following:

Energy savings.

It’s not uncommon for companies to list of 9 ways LED beats fluorescent on our blog, it’s certainly worth checking out.

Longer lifespans.

Longer life spans by 2 to 3 times is very common when converting to LED from other lighting technologies, just as much as its very common for the insane energy savings we talked about above.

This has two mains benefits which we always talk about: the less often need to buy replacement tubes as well as fewer maintenance costs to pay someone to replace those lights. We like to think of the second as an indirect way longer lifespans saves you money, and it’s certainly a great benefit.

Conclusion

We’ve not only covered tips to consider when implementing a better lighting system into your office but also why LED might be a great option for doing so while also reducing overhead costs. Hopefully, by following these tips you find your way to a more productive office and lower overhead.

Although LED T8s have not been around long enough to produce a thick memoir, there are some interesting things to note about why they exist.  A few years ago, there was concern that the rare earth metals used in fluorescent tube lamps might start getting significantly more expensive for the U.S. to purchase from China. Light bulb manufacturers began an arms race to develop an affordable and effective LED T8 replacement tube.

A sustained sharp increase in the price of phosphors never really happened. And so LED T8s have gained momentum in their evolution, organically evolving to better perform well in certain applications. Their price point has decreased, and their performance has gone up. And now, LED T8 linear lamps are certified by the DesignLights Consortium to be high quality, high efficiency lighting products.

However, LED T8s continue to be very controversial – even divisive – in the lighting world. Many people think they’re great; but some people think their existence is entirely unnecessary. Both sides of this argument tend to contextualize their visions of the merits and pitfalls of the LED T8 in a comparison with the merits and pitfalls of the traditional fluorescent T8 tube light.

LED T8 Linear Light Bulbs vs. Fluorescent T8 Linear Light Bulbs

First of all, the merits of fluorescent T8s cannot be overstated. Fluorescent tube lamp technology has been developed over decades and is now basically mastered. Fluorescent T8s are extremely inexpensive and have ridiculously long rated lives. In fact, in some cases, fluorescent T8s can last as long as LED T8s!

And it doesn’t stop there. The production of light with fluorescent tube lamp technology works really, really well. It is probably at its peak in terms of performance and cost. Fluorescent T8 light bulbs can last 50,000 hours. And despite their not-always-positive reputation for rendering color, fluorescent T8s can achieve high color rendering indexes (CRIs). But, it must be clearly noted, fluorescent T8s get more expensive as you seek a higher CRI.

And in terms of cost, let’s just say it straight: In many applications, the LED T8 tube light’s initial cost doesn’t make sense when compared to the relatively low cost of fluorescent T8s.  For example, at this stage of the game (June 2014), lighting large spaces like classrooms or large offices is job better performed by fluorescent T8s than LED. First, there’s the cost. Fluorescent tube lamps last long, cost little, and give off crisp light. Furthermore, fluorescent tubes give off light omnidirectionally, casting light upwards toward the ceiling as well as downward. This makes a space look more fully lighted. LEDs, in contrast, are generally more unidirectional and cast light downward only. This is something that will change, but, currently, this is just affirmation of the fact that fluorescent T8s reign supreme for some applications.

Fluorescent T8s often take a while to come on; they’re adversely affected by temperature (and somewhat sensitive about it); they can flicker often; and if the lights are turned on and off frequently, as in laundry room or bathroom applications, for example, they can fail quite prematurely, to the dismay and annoyance of everyone involved. And then there’s that toxic mercury vapor which poses danger to humans and the soil on which we live.

Oh yeah, fluorescent tube lamps require a ballast, too: A component that will also, eventually, fail.

Now, let’s give some attention to LED T8 tube lamps. It should first be noted that LED T8s have a higher initial cost than fluorescent T8s, which can be purchased for only a few dollars in some cases.

Despite their higher cost, LED tube lights have some nice advantages. First of all, LEDs love the cold, so they are great in cold weather applications, unlike fluorescent T8s, which become seemingly infirm in the cold, slow to turn on and flickerish. Basements, sheds, garages, porticos, covered pathways, bathrooms, etc, are great places to utilize the LED T8 linear lamp.

You also have to consider that if an LED T8 tube breaks, it will not release harmful mercury vapor into the air. Mercury from fluorescent tubes can get into the air but also the water supply, which is why you have to recycle them. For some people, the whole mercury thing is enough to open their minds to alternatives to the long-reigning fluorescent T8.

Plus, you can get better color rendering with LEDs than with fluorescent lights. Fluorescent lights work by transforming ultraviolet radiation into visible light. If you have a vague idea about what UV light is, you know that it’s the part of the light spectrum that’s just past the blue and violet area. Even with a rudimentary understanding of light, then, it’s easy to see how the result of transforming UV light into visible light would leave you with a bluish result. As a result, in general, fluorescent lights do not render reds well.

LEDs exude very little to no UV or infrared radiation, both of which fade the color of displayed objects including wall art, furniture, and even rugs. Fluorescent tubes – did you know this? – do indeed fade sensitive belongings over time.

Finally, LED tubes do not generally require a separate power supply. They run on line voltage and require no separate drivers, ballasts, or transformers. That’s one less thing that can break. In conclusion, LED T8s are more expensive than fluorescent T8s, but LEDs are safer, render color better, require no ballasts, operate better in the cold, and do not decline significantly in lifespan due to frequently switching on and off. This means that there are some applications, like cold places, bathrooms, basements, laundry rooms, kitchens, closets, storage rooms, walk in refrigerators or freezers, or places where there’s a risk of broken light bulbs like gyms, warehouses, etc, for which LED T8s might be the better choice. And since LED T8s don’t weaken with frequent switching on and off, they are great for use with occupancy sensors.

Are you looking forward to backyard barbecues and evenings outside on the patio this spring? Although southern California doesn’t have to worry about some of the issues that winter normally causes the rest of the country, this winter did bring a pounding of rain that likely affected your outdoor equipment. Your landscape lighting may not have fared so well and before you can really enjoy those warm spring and ultimately summer evenings in the backyard, you need to have your lighting fixed. This is something you can have a Los Angeles electrician do for you. The team at The Electric Connection is here to help you get your yard and the landscaping back in shape for another beautiful spring season.

Overtime, the wiring in the electric lights erodes and you may notice some lights are not working or they flicker. This is something you will want to have taken care of before the entire string of lights shorts out. Depending on the problem, it may be able to be repaired by an electrician. Los Angeles homeowners can opt to have newer, more energy-efficient lights installed in their landscaping or stick with the older ones and just have them repaired. Updating the outside lights is like giving your landscaping a facelift. You can add more dramatic lights to showcase a blooming flower garden or highlight a new water feature.

If you have been considering getting new landscape lights or want to expand the scope of your existing lights by adding new ones or possibly brighter ones, now is the time to do it. Spring will be here before you know it and the hustle and bustle of the summer will quickly follow. Get your outdoor lighting taken care of today so you are ready for that first barbecue. Give The Electric Connection a call today and schedule your lighting appointment.