Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.

Routine electrical service and maintenance is critical for all home or commercial buildings in the Des Moines Iowa area.   When you have routine electrical service done, it will keep your important electrical systems running longer and help you avoid expensive future repairs. In the event that there is an issue with your electrical system, your electrician can identify it during this routine visit so that repairs can be done before the problem becomes larger or even becomes an electrical fire.  Schedule your local electrician today and have your electrical system checked out.

As lighting technology has advanced, one of the clear front-runners in long lasting, energy efficient lighting is the LED light. With uses ranging from interior lighting to landscape lighting, there are many reasons why you should switch your home lighting over to LED. Because LEDs are being manufactured in many of the same form factors that you are familiar with, you have the option of calling a Burbank electrician such as The Electric Connection to help you switch out the majority of them if you feel it’s too overwhelming of a job, or you could take it on by yourself. If your lighting project is more extensive than changing out a few light bulbs, and you plan on installing recessed lighting or new fixtures, you should definitely look into having the work done by a professional electrician in Burbank.

Benefits of LED Lights

The most publicized benefit of using LED lights for most lighting applications is the extremely low energy usage and long lifespan. This benefit is seen best when compared by an electrician in Burbank CA with other light bulb technologies. A standard incandescent bulb has a lifespan of around 1,000 hours, a compact fluorescent has a lifespan of around 8,000 hours and an LED has a lifespan of nearly 30,000 hours. This is a huge increase, meaning that you will have to change your bulbs much less frequently than before. Furthermore, LED light bulbs are mercury free, unlike compact fluorescents.

In regards to energy efficiency, LEDs are also way ahead of the pack. As a result of the low energy required to run an LED bulb, there is also much less heat required. This leads to lights that are cool to the touch, making them much safer for many applications. When asked about power consumption, an electrician in Burbank will tell you that LED bulbs use much less than any other currently on the market. For example, a 40-watt incandescent bulb burns just as bright as an 8-12 watt compact fluorescent or a 4-5 watt LED. By switching from incandescent to LED, you’re only using about 10% of your previous energy. This can make a huge difference, considering that lighting can make up almost 25% of any home energy budget!

Choosing an LED

When choosing an LED, there are many factors to be taken into consideration. If your home lighting project is extensive, think about doing a quick Internet search for electrician Burbank and then find one that you can trust such as The Electric Connection. Working with an electrical contractor on this type of project is very much like having ceiling fans installed, outlets replaced, bath fans installed or having new switches or lighting dimmers installed. A licensed Burbank Electrician such as The Electric Connection will be able to explain everything that needs to be done in order for your custom lighting job to be done well. If you are just looking to replace some of the bulbs in fixtures around your home, there are just be a few things that you should know.

To make things simple, most packages rate their light bulbs with both actual watts, and watts relative to an incandescent. This means that if you are using a 45-watt incandescent, you should be able to find a 3W LED with packaging that lets you know that they are equivalent. If these comparisons are not listed on the box, there should also be a lumen rating. If necessary, you can compare the lumens between types of light bulbs. When choosing light bulbs for your fixtures, you will most likely be shopping for diffused bulbs. These bulbs look very similar to a standard fluorescent bulb, and help to diffuse the light. This gives the light a more natural feel. Other types of lights include outdoor landscape lights, such as floods and interior spotlights for more focused light concentration. Regardless of what type of lighting you choose, your licensed electrician Burbank CA can always help you with any questions that you might have. Enjoy your new lighting!

Visit our company profile.