One of the most exciting innovations in lighting in recent years has been the light emitting diode (LED) bulb, which promises to usher in a new era of energy efficiency. These bulbs use considerably less power than a traditional incandescent light and even a compact fluorescent (CFL) bulb while providing the same amount of illumination. They can also last many years longer.

But one of the most important features of LED lights is that they can be connected to a network, and with the power of the internet, your lighting can become "smart," anticipating when the house is occupied and when it is vacant, as well as adjusting brightness to better accommodate your lifestyle.

I grew up in the 90’s, back when thrift store shopping was considered alternative and grunge.  While I tooled around Goodwill listening to Nine Inch Nails on my Walkman, my more sophisticated friends were at the mall, looking adorable & stylish in the latest trend from The Limited.

But that was the 90’s.

Thrift-store shopping, dumpster-diving, and hand-me downs deliver a new parlance that has clever DIY’ers quaking with excitement for Saturday yard sales and obsessively scouring Craigslist for the Next Big Find.  This elegant new term for taking used items and making them new = REPURPOSING.

Also commonly referred to as recycling, upcycling, reinventing, revitalizing and/or reusing, entire boards are dedicated to this subject on Pinterest. Everything – and I mean everything – can be repurposed.  So why not the light bulb?

With a few basic tools and a steady hand, a light bulb can be hollowed out and transformed into a unique gift or decorative project.  Prepping the bulb, however, is not a task that we recommend for the kids.  Before you undertake any of these projects, take a moment to read a tutorial on how to safely hollow out a light bulb.

1. Witches Brew

Over the years standards for building homes have improved to offer more safety and reliability. Unfortunately, there are still homes out there with old electrical wiring in them that could cause electrical hazards. These old wiring types (knob and tub wiring) should be replaced as they can result in extensive damage to your home over time if not properly taken care of. Know what to look for in your home and upgrade your wiring.

There are several common signs that can indicate your home’s wiring may be old and out-dated. If you notice these issues occurring in your home, it may be time to contact an electrician and have a home electrical inspection. Common signs are:

Knob and wiring tubing can be found in homes built around 50 years ago. If properly maintained, knob and wire tubing can be safely used in your home. But often over the years the wiring can begin to crack and break down leading to exposed wires. Because of the age of the wiring it often will not reach current code and can prevent your home from being insured in some cases. Overtime knob and wire tubing can heat up and requires sufficient air space around the wiring. Any contact with insulation or wood can result in a fire.

In some cases you could experience some of the issues listed above and you don’t have knob and wire tubing. In many cases, when a home was originally built it was brought up to correct standards and has potential hazards all over. If you are unsure of the status of your home’s electrical wiring or you are experiencing some of the signs listed above, we highly recommend that you have you’re home inspected. An electrical inspection can catch potential hazards and also lead to better electrical efficiency.

To schedule a home inspection, contact your local Expert Electric at 604-681-8338.

The end of the month has arrived, along with that same old utility bill. The cost of electricity can be a huge dollar amount, especially in larger homes with larger families. The utility bill has become just a part of life. Driven by the energy consumption of fridges, washing machines, lighting, and so much more, the electricity consumption of your home is dependent upon many things that often cannot be helped. However, there are a few household items that take up a surprising amount of electricity that you may not have thought about! Changing the way that you and your family uses these 5 common items could actually make a difference in that monthly bill in your mailbox! Here’s a list of these sneaky electricity users and some suggestions on how to decrease their energy use.

Personal electronics are a part of our everyday routine, whether it is our smartphones or our laptops. There’s no avoiding charging your device, but between 100% battery life and the idle time it spends charging afterwards, it becomes a major energy consumer. Leaving your cellphone or your laptop plugged in after it has reached a full charge still pulls in a decent amount of electricity. This does no good for your electricity bill, and it actually is worse for your device as well. Leaving your electronics plugged in past the full charge does damage to its long-term battery life.

The Solution: Immediately disconnect your electronic device from its charger when it gets to 100%. Unplug the actual charger, then do it all again when it’s time to charge again. Don’t plug in your devices at night when you go to sleep—that’s 8+ hours of idle charging time that racks up the dollar signs on your electric bill.

Xboxes, PlayStations, Wiis…the number of consoles that are available grow every day, providing entertainment and family fun. However, whenever those devices are on and not being used, it sucks up a lot of electricity to keep it powered.

The Solution: If you’re going to step away, turn the console off. Never let it linger and go idle, as this can use unnecessary energy. Unplug these devices when you travel, as well.

Surprisingly, your DVR or cable box can use as much energy as your refrigerator: one of the largest energy consumers in your home. These devices are always in standby, waiting to be used, which means that they constantly pull in energy just in case you press the On button on your remote. So not only do they use energy when they are on as you are enjoying television, but they are also using energy when they are off.

The Solution: Like the consoles, turn off the TV when you step away. Then unplug the actual DVR or Set-Top boxes when you know you aren’t using them or are traveling for a period of time. This could save you quite a few dollars on your next bill.

Summer time in Colorado means lots of dry heat. Especially if you do not have an AC system, like most older homes and apartments have, then ceiling fans are your only source of cool air. However, when they are big electricity users, so if you can help it, switch them off.

The Solution: Don’t keep the fans on for long periods of time, like when you are out of the house, or at night time when you’re sleeping. You could also upgrade to a more energy efficient model of ceiling fans, which could save you some money as well.

Just like DVRs, microwaves use energy both when they are on, and when they are off. When you’re not using your microwave, it sucks in constant amounts of energy to keep the buttons lit and the clock on. Then the energy levels jump to an all-time high when they are in use.

The Solution: Unplug your microwave when you’re not using it. Keep electricity levels low by only using the microwave when necessary. You could do this by doing things like avoiding defrosting meat in the microwave—letting it sit on the countertop for a few hours instead.

Though they seem small, these 5 household items are mighty when it comes to electricity use, even when they are not being used. If you’re trying to cut down your electricity bill, or want to be more energy efficient, these small changes in the way that you use these everyday items could make a huge difference in the long run.

Becoming a licensed Colorado electrical contractor is not easy, and that’s the way it should be. Electrical systems—whether they are in a home or a large industrial facility—are both vital and potentially dangerous. Electricians need to be trained and skilled to ensure that these systems are installed correctly, functioning properly, and safely maintained; otherwise, serious problems may occur, which could lead to lost productivity or property. There are many companies who advertise electrical contracting services, but you don’t want your safety to be left in the hands of an amateur.

The Certification Process

There are three levels of licensure for electricians in the state of Colorado: residential wireman, journeyman electrician, and master electrician. Each level requires testing and many hours of verified on-the-job experience. In fact, the amount of time electricians must put in to be licensed may surprise you: *

PECI Goes Even Further

You Can Trust PECI

*from the Colorado Department of Regulatory Agencies