Surely you have seen electrical outlets your entire life… but do you know how they work? Their purpose is so important, it can actually save your life. If you read our article last week, you will understand how the electricity has already arrived at the outlet. Grounded electrical outlets then take the energy from your home electrical system and make it available. Here is more about what they are and how they work.

In Canada we have the three-prong outlet that you are familiar with. The outlet’s left hole is smaller and it is the “neutral” slot. The right hole is slightly larger and this is called “hot”. The bottom hole is the “ground”. The electricity flows in a loop, traveling from hot to neutral. This means when you plug your television in the electricity will flow from the hot slot of the outlet, into your television to power it, and then out to the neutral slot.

You have probably noticed that some appliances have only two prong plugs and some have three. This is because some appliances need to be grounded. Electricity always flows towards the ground, and when the electricity flows into your body and into the ground, you experience electrocution. Instead of a body potentially absorbing this current, the grounder redirects the electrical current traveling into the outlet so you will not be hurt. Items that have metal casings, such as televisions and computers, will have their metal cases attached to the grounder so that a current will not accidentally run throughout the case and shock you when you touch it.

When electricity becomes unbalanced in the electrical outlet, the outlet will “trip” and shut off the flow of electricity. For example, if an electronic device comes into contact with water, electricity will escape into the water. Once the outlet detects that less electricity is coming into the neutral slot than what should be, it will shut down. This safeguard protects users from potential harm.

By playing or tampering with an electrical outlet, you can get hurt or severely injured. It is important to use the appropriate equipment and follow manuals before plugging in electrical devices. If you need to make changes to your electrical system you should consult a professional first.

As Texas struggles with 2012 predictions of problems reminiscent of last year’s power outages and power grid malfunctions, residents are scrambling to find a Dallas electrician that can provide answers and help them create contingency plans to ensure they are minimally affected. Electric Man, a reputable Dallas electrician provider for over 27 years, provides some insight into the situation facing Texans today and what they can do to avoid costly and inconvenient side effects stemming from such possible scenarios.

A Look Back At 2011

Texas residents suffered damaging and costly electrical problems in 2011. Three major blackout incidents, two of which happened in the winter months of February and December respectively, left residents without heat and without power for hours and, in some cases, days at a time. Equally distressing was the 71-day drought that had Texans begging their local Dallas electrician for relief, as 100-plus degree heat waves weakened the power grid once again and left residents without air conditioning or electricity.

2012: Not Much Better

Unfortunately, 2012 does not seem to be the year for relief. Experts warn that several factors point to an even more severe blackout and power grid problem in the state of Texas for 2012.

 These factors translate into miserable, costly blackouts and power grid failures throughout North Texas.

Dallas Electrician Company Provides Solutions

There are some solutions for customers looking stay ahead of the game when it comes to protecting their home and appliances from the inconvenient and sometimes dangerous conditions that stem from power grid failures. With the help of a knowledgeable electrician, Dallas residents can acquire an indoor generator, which can serve as an effective emergency power source for your home or business in the event of a blackout.

One of the most convenient features of these indoor generators is that there is no need to use electricity to recharge the battery bank that runs the generator. Without the mess of a fuel-powered engine generator, customers can count on reliable and steady power output and a quiet supply of power for your appliances. Furthermore, the convenience of a solar-power or wind-power battery charge ensures that customers need not worry about using electricity to recharge generator batteries.

For over 27 years, Electric Man has been a leading provider of Dallas electrician services for residential and commercial customers. There is no job too big or too small. Call Electric Man today at 972-792-7270 and connect on our social media sites…

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.