Do you have an electrical repair or a project you’re moving forward on, or you’re wanting to improve the look of your home or business?  Will you do it yourself, hire a handyman, or hire a qualified electrician?

Because of the rising costs of our island’s economic environment, many are looking for ways to cut costs when it comes to electrical repairs or additions. One way people are doing this is through their own attempts or choose someone who claims to be a qualified electrician working as a “handyman”. The current economy has left many skilled tradespersons unemployed and eager to offer their expertise as a handyman repair worker.

A “handyman” might be able to do the electrical job you have or they might not.  How are you to know?  Much of the work performed in an electrical project is covered up by walls, wire junction boxes, or in limited access locations.  I’ve  seen bad connections where the previous installer has connected wires using gift wrapping tape or paper clips or some other household items. Also, wires that carry high voltage were cut, pinched, and fully exposed to a shock or fire hazard (see above picture).  The owners knew nothing about this!  Following the electrical codes didn’t seem to be a priority in these attempts.  Codes need to be met or there’s a huge liability to persons and property.

Electrical wiring can be very dangerous! A handyman may have some electrical talent, but they are not recognized by the law as a licensed contractor. In other words, in Hawaii, they cannot pull permits on jobs where they are required or legally work on projects that earn $1000.00 or more for their services. The State knows the dangers of unlicensed work.  They are not just looking for other means for revenue.  If you hire someone who is unlicensed to save money, then you are taking a huge risk.  If something goes wrong,  you have  very little recourse.  You could end up paying more in the end.

Blue Sky Electric not only is licensed, but insured and bonded.  The State requires this for good reason….. The State of Hawaii has a fund for you that all licensed contractors pay into called the “Contractor’s Recovery Fund”. The purpose of the fund is to provide reimbursement to a consumer who has suffered a financial loss as a result of a licensed electrical contractor who has engaged in fraudulent, deceptive or dishonest practices, or failed to perform.  Injured parties my collect funds to recover damages.  Any unlicensed person can not offer you this protection.

To get the results that you expect, it is essential that you put appropriate effort behind finding an electrician matched to the specific requirements of your job – do not simply trust someone that puts you at ease or wins your confidence.  If a licensed contractor is hired one item to look into is their complaint record with the Hawaii Board of Contractors. Here’s a link to check the status of a person’s record: Hawaii Professional and Vocational Licensing Search Whoever you may hire, they should always come with word-of-mouth recommendations or testimonials of their peers.

Call us to discuss your project, and our expertise.  Let’s talk about doing it right the first time.

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.

If your old electrical panel is no longer functioning properly, it can be endangering your home and everything inside it. Read on for the various warning signs you should be looking out for.

Even an old electrical panel is an improvement over fuse boxes (these can no longer keep up with the energy demands of today’s households), but if it’s getting to be a bit too old, you may need to look into replacing it. The panel is responsible for taking power from the main line outside and directing it through your electrical system.

The electrical panel also disconnects circuits when there is too much current flowing through — this is what protects you from hazards like electrical fires and damaged appliances. If you’re not sure you need to replace your existing setup, we’ve put together some of the warning signs that will indicate whether or not it’s time to move on to a new panel: