We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

It is only natural you would want to make your home as safe as possible. You are protecting your investment as well as the people who dwell in your home. There are plenty of little, fairly inexpensive things you can do around your house that ensure there are safety measures in place. An electrician in Santa Monica can help you make your home safer. The team at The Electric Connection is here to help. Safety Inspection

Your first layer of safety is to have an electrical safety inspection completed by an electrician. This will help identify any problems that are lurking behind the walls of your home. An electrician will go through your home’s electrical system checking for any warning signs. If the home has cloth wiring, it will be recommended the wiring is replaced and upgraded to today’s standards.

Hard-Wired Smoke Alarms

Hard-wired smoke alarms are an excellent addition to any home. The smoke detectors are wired directly into your Santa Monica electrical system. You won’t have to worry about your home being left vulnerable to fire because a battery was dead. If your home is multilevel or spread out, the hard-wired smoke detectors are especially ideal. When one detector is alerted, all of the smoke alarms will go off. This gives every person a few additional seconds to escape, which can mean the difference between life and death.

GFCI Outlets

GFCI outlets are an additional safety measure you can add to your kitchen and bathroom areas. The outlets prevent against electric shock if water happens to somehow come in contact with an appliance that is in use. The second the circuit is interrupted, the outlet will trip the breaker and cut off the electricity flow and prevent electric shock. If you would like to make your home a little safer this spring, give The Electric Connection a call today.

A recent TedTalk about LED lights has garnered about a million and a half views. That high number isn’t surprising, given that LEDs have been making headlines a lot, lately. Tons of informational articles about the efficiency of LED light bulbs and how to choose them have been circulating online. But this TedTalk is about something quite different – data transmission.