Hot tub wiring and circuits are a big request this time of year.  Summer specials such as those going on at the Iowa State Fair dramatically increase sales.  With many hot tub brands to choose from such as Hot Springs Spas, Maax Spas, California Cooperage, Jacuzzi, Caldera Spas, and Thermo Spas the choices are numerous.  Hot tub installers typically do not wire your hot tub unless there is a specific and properly wired disconnect in place.  The hot tub circuit with disconnect must be installed by a licensed electrician.  The hot tub or pool disconnect has certain requirements pertaining to the type and distance required from your pool or hot tub.  In addition to this the circuit must be the required ampacity and voltage intended for your hot tub in order to insure the safe and reliable operation for you and your family.  Never trust someone that is not an electrician trained in proper hot tub wiring.  

Installing the proper hot tub wiring is not a project for that handy family member or the guy down the street.  Hot tub wiring must be done properly and to state and local building codes.  In addition the wiring must be done to strict National Electrical Codes.  All of our electricians that are trained in hot tub wiring follow the code to ensure you and your family are as safe as possible.

Just like hot tub wiring, pool wiring must only be done by a trained and trusted professional.  Pool wiring has strict guidelines set in place for your safety.  Bonding, grounding, and GFCI protection are all major concerns when installing wiring for your pool.  Pool wiring is not a do it yourself project and should only be done by a licensed electrician.  We work with several of Des Moines top pool installers to insure your next pool project is done to the highest of standards.  The code is in place and should be followed closely with no exceptions.

Doing work around the house without calling for help is a common point of pride for many people, but an amateur should never tackle an electrical panel installation — regardless of the bragging rights on the line. No amount of pride is worth an incorrect electrical panel installation, especially when you consider just how important and complicated this component can be. Additionally, you should remember that electrical work can be extremely dangerous for anyone who isn’t a professional.

This principle most definitely applies to putting in a new electrical panel. If you’re knowledgeable enough, you may be capable of replacing an outlet or switch on your own. For bigger jobs like this, however, it is critical that you bring in an electrician. Not only would you be in danger during the installation itself, but even small mistakes made during the process can lead to future risk of fires and electrocution.

Electrical code requirements control the size of a panel in a newly built or renovated home, and these rules can vary based on your location. There is a reason there are strict measures for electrical panel installation, and those reasons are clear when you consider just how important these panels are. Panels are essentially a central hub for the electrical system in your home. They are an important safety measure as well. The power that comes in from the electric company passes through your electrical meter, and then into the panel. The panel directs the electricity through your home.

Electrical panels use circuit breakers, which control the amount of current provided to an outlet. They also serve to protect your system (and home) from power surges. If the breaker identifies an excessive amount of current, it shuts it off and protects components from the overload. It does this in a fraction of a second. This keeps appliances safe and also protects your home from the risk of a fire.

An incorrect electrical panel installation undermines the safety measures of your panel. An inexperienced installer might accidentally connect a wire to a breaker designated to allow more current than the wire can safely handle. This means unsafe amounts of electricity would be passing through, and the panel would not be able to do anything about it. An overloaded wire could easily spark, which could then lead to a fire.

An electrical panel isn’t a component you want to worry about after installation. Unless you’re a professional, there’s no way you can promise this won’t be an issue after you’ve finished working. Beyond that, an experienced electrician can make sure the panel lasts for a long time.

By using sophisticated equipment and materials, as well as in-depth knowledge of local energy code requirements, a professional will be able to achieve a level of efficiency and quality that would be out of reach for any amateur. Your home will be better protected from future issues after thorough wire testing once the installation is complete. A new panel installation is an involved, intricate process, and it’s important that even the smallest steps are correct.

It’s incredible the way lighting can change outdoor spaces. As is the case with indoor spaces, spending comparatively little on lighting can produce dramatic results. A DIY outdoor lighting project might be just the thing to make you fall in love with your home all over again. But before you begin an outdoor lighting project, it’s important to think about your options. Here are 10 tips for 10 approaches to outdoor lighting.

1. Using Outdoor String Lights

Outdoor string lights are just great. But there are so many different kinds! Some have bare bulbs; some have lanterns. Some are LED; some incandescent. Some are white; some are colored. Make sure you research your options and choose the ones that are right for YOU!

2. Taking DIY Outdoor Lighting to the Next Level

Sure, you can install a standard low voltage lighting fixture and be justified when you say you Did It Yourself, but have you ever considered making your own DIY outdoor lighting fixtures? Mason jars seem to be the ingredient of choice when constructing your own outdoor lights. The internet is full of instructions for making DIY outdoor lighting fixtures, so do your homework and find the perfect project to make your outdoor area more luminous.

3 . Making it Modern

Let’s get weird! Isn’t that what modern outdoor lighting seems to say? I guess it depends on whom you ask. Modern outdoor lighting usually consists of interesting light fixtures with unusual, playful designs, and they can really make your outdoor vibe more interesting and thought-provoking.

4. Showing Off Textures

Sometimes you start with a particular light source in mind. These days, that light source is often LED. If you’re sure you want to use outdoor LED lights, you have a wide variety of outdoor LED light fixture types, from LED rope to LED tape to LED path lights, step lights, puck lights, recessed lights, and string lights. LED outdoor lights are highly efficient and look great. And some, like the one above, run on solar power! That means free!

8. Decking Out the Deck

If you are focused specifically on outdoor deck lighting, make sure you think about caution. Outdoor deck lighting should entail step lights if there are steps and should include lights around the perimeter of the deck. LED tape or rope, colored or white, are often great for running on the underside of deck railings.

9. Using Timers