With the start of the school year and the holiday season approaching, it seems as though the mound of expenses just keep piling up. You’re budgeting for school shopping, lunches, holiday shopping and making sure your lights stay turned on. This season tends to be the most expensive for many home owners.

Luckily, we have a few ideas on how to cut back on utility bills and lower your electric bill. We also provide home inspections for everyone in the Northern Virginia area and look at ways you can utilize the most out of your electrical appliances. You may be heading into a time filled with many expenses but you can pad your pocket with money saved from lowering your utility bill. Check out these tips that will help you with your utility bills and give you peace of mind during this hectic season!

Install Dimmer Switches

When you install dimmer switches, you can use only as much light as you need. With a traditional light switch, the only settings are on and off, meaning you are either using 0% electricity or 100%. With a dimmer, you have an entire spectrum of settings in between. Being able to decrease the amount of light you use inevitably results in lower energy bills. Install dimmers in the rooms you use the most like the kitchen, living room, bathrooms, and bedrooms; this will allow you to take advantage of the greatest savings possible.

Keep Your Fridge and Freezer Full

Everyone always tells you to keep the fridge closed. But did you know that keeping your fridge and freezer full can also save money? Food acts as insulation and lessens the amount of time that the fridge has to run to stay cool. This will be easy to do with all of those lunches your family will have to pack for school and for the Thanksgiving and Christmas holidays.

Install Ceiling Fans

Keep the air circulating in your home, and your air conditioner won’t have to work as hard. Ceiling fans can help lower your electric bill by up to 30 to 40 percent. While a ceiling fan doesn’t actually decrease the temperature of a room, the draft makes the room feel cooler – allowing you to raise the thermostat and be just as comfortable. You can even use your ceiling fans in the winter months! Many people are unaware that ceiling fans can be used to circulate warm air during cooler months of the year. By running the blades clockwise, ceiling fans push warm air down from the ceiling without creating a draft.

Get Rid of “Phantom Loads”

A shocking 75 percent of the energy used by home electronics is consumed when they’re turned off. These “phantom” users include: televisions, videogame consoles, stereos, computers and many kitchen appliances—basically anything that holds a time or other settings. A simple solution? Plug all of these items into power strips; then, get in the habit of turning off the strips between uses.  This will cut back on utility bills and will help combat overloading fuses.

Switch to LEDs

LED light bulbs use 90 percent less energy than incandescent bulbs. Switch out the most widely used bulbs in your home. Then, replace the rest as they burn out. LED lights tend to last much longer than traditional bulbs so you won’t have to replace them as often – saving you money.

The easiest way to add lighting to a closet is by installing a simple, battery-powered fixture or hanging a corded fixture plugged into a nearby outlet. However, there are permanent solutions. Calling an electrician Beverly Hills, such as one of the skilled members of the Electric Connection team, is always a great choice when you have electrical projects that need completed. Learn more about what Electrical Connection will do when installing closet lighting in your home.

The electrician will work with you to determine the local building codes for clearance around the fixture then mark the desired location. He or she will then go into the attic and cut the hole necessary for installation. This may require some drywall work to properly mount the fixture.

At this point the electrician will cut off power to that part of the home using the home’s service panel. An electrical circuit cable will be run from the source point to the fixture box. Many times there will be a receptacle near the closet, or this may run through the attic to find a suitable spot. It is important the electrician tests to make sure the circuit can accommodate the fixture.

The electrician in Beverly Hills will connect the fixture following the wiring diagram from the manufacturer. The wiring connections will be completed at the source point. Finally he or she will restore power to the circuit and test the light fixture.

As you can see, this is a relatively complex task and not one you want to tackle alone. If you are considering the installation of closet lighting for your home, make sure you work with the best— the expert electrical team from Electric Connection is always here for you and ready to take on any type of lighting installation project you may have.

Energy deregulation gives consumers choices when it comes to the companies that provide their home electricity. Suppliers can compete for your electricity dollars in a variety of ways, offering low prices, short and long-term contracts, fixed or variable rates, and a choice in how your energy is generated. The sheer volume of options can seem so complicated that you need to ask an electrician to help you tangle out the pros and cons of the available plans. One area in particular that can trip up consumers has to do with whether the source of their electricity is green or renewable. Read on to learn the difference.

Green Customers are Loyal Customers

Currently, 15 states plus Washington, D.C. have active electricity deregulation programs, according to the U.S. Energy Information Administration, and these states are largely concentrated in the Northeast. Consumers who live in deregulated states are likely to be flooded with energy offers, often promising electricity that is derived from green or renewable sources. Purchasing this environmentally friendly power usually costs a bit more than electricity that comes from more traditional sources like coal, but some homeowners like to put their money where their mouth is when it comes to reducing carbon emissions.

Those customers who go green are valuable to the supplier because they are less likely to jump ship based on the availability of a cheaper energy source. "A customer on a renewable-energy product has actively decided what is important to them and has selected their supplier accordingly," Ritchie Hudson, Pennsylvania chairman of the Retail Energy Supply Association, said to the Philadelphia Inquirer.

A Question of Semantics

However, while many suppliers and consumers treat green and renewable sources of electricity as synonymous, there is a distinction. Green energy is that which comes from specific sources that have the highest environmental benefit, including solar, wind, geothermal, biogas, eligible biomass and small hydroelectric sources, according to the Environmental Protection Agency. Meanwhile, renewable energy “includes resources that rely on fuel sources that restore themselves over short periods of time and do not diminish,” which includes all the green options but also other sources such as large hydroelectric dams, which present certain environmental tradeoffs.

That means that if you really want to limit your impact on the Earth as much as possible, go green in lieu of simply choosing renewable energy. You can further refine your choices by asking about the specific source of the electricity, if you have a preference for solar, wind or another option.

Ask an Electrician About Your Options

Deregulated energy markets give you flexibility, but can also sow consumer confusion. If you need help deciphering the offerings of your state's electricity providers, ask an electrician who can walk you through your choices.