It might be hard to believe, but even with as cold as it’s been, spring is on the way! And while you’re out enjoying the outdoors, the Sterling electricians at Kolb Electric want to bring you some electrical safety tips to make this spring safe and fun!

Keep power cords away from water – you probably already know this, but water and electricity don’t mix. Any time you’re dealing with electricity, make sure you’re working in a completely dry environment. You should also consider testing your GFI outlets.

Beware of power lines – if your spring cleaning involves getting up on a ladder or using a long-handled pool-cleaning tool, make sure you know you’re clear of power lines before you start. Power lines are interesting—if you were to hang from one without your feet touching the ground, you would be safe. However, coming into contact with power lines while you’re standing on the ground is a different story, as the electric current will travel through you on its way to the ground. Note that if the power lines are low enough, this could happen even if you’re just standing under them!

Always call before you dig – underground power lines are just as dangerous as overhead power lines, and since you can’t see them, it’s almost impossible to know where they are! If your spring plans involve digging of any kind, like adding an addition to your home or even planting a tree, make sure you call to confirm that it’s safe to do so!

Keep materials, tools, and all body parts at least 15 ft away from overhead lines – like we said above, power lines can strike you even if you’re standing too close to them. 15 ft is the safest minimum distance, so make sure you’re aware of this, especially if you’re working on the roof.

Never fly kites or model airplanes near power lines – we keep harping on the power line issue because they can be very dangerous if you’re not careful. If you have a kite or model airplane that ends up getting tangled in power lines, don’t try to get it down yourself—call your local utility provider for assistance. As a side note, make sure you never use any metallic materials in your kite—these can conduct electricity back to you.

Inspect power tools and electric lawn mowers before every use – frayed power cords, broken plugs, and weathered or damaged housings can make your equipment dangerous to use, so don’t use anything until it has been repaired properly. When not in use, keep these tools unplugged and store them in a dry area.

Watch out for power lines hidden behind foliage – before you trim tree limbs and shrubs, make sure there are no power lines hiding behind them. If you are concerned about tree limbs growing on or around overhead power lines on your property, call your local utility provider.

Keep your electrical box clear – you know that large, green, ground-level box you may have in your yard? That box houses the components of an underground electrical system. Keep it clear of vegetation and other permanent structures, as utility workers may need to access the underground lines and equipment during unplanned outages or routine maintenance.

Do not use electric mowers on wet grass – as we said in the beginning, water and electricity are a dangerous combo. Only use an electric mower on dry grass, and if you need to use an extension cord, make sure you use an insulated cord designed for outdoor use and with the correct power rating for your equipment.

Treat all power lines the same – some power lines are high voltage, some are low voltage. For safety, treat all power lines as if they are harmful—because chances are, they will be!

The Sterling electricians at Kolb Electric want to wish everyone a happy and safe spring season. And if you need an electrician in Sterling or anywhere else in the MD/DC/VA area, call Kolb Electric today!

While incandescent light bulbs are popular, they’re quite dangerous. Incandescent bulbs have high-temperature gasses inside, and these gasses can react dangerously with external air. If your incandescent bulbs are in a cold room, they might create a combustion nightmare. Keep them away from drapes, beds and other upholstery items.

Wall outlets installed near sinks, faucets and bathtubs can propose dangers. Make sure your outlets are installed away from any water sources, as they can create electrical hazards. If need be, your technician can reinstall them in a different location. Pay close attention to any outlets in your home’s bathrooms and kitchen.

Chewed, frayed or plain old electrical wiring can create a fire hazard. While most worn out wiring will be exposed, some lengths may be hidden within your walls. Keep your pets away from exposed cords, and reduce the chance of fire before it’s too late. Additionally, contact a professional for an annual wiring checkup.

Commonly, homeowners max out their power strips. If you have a lot of electronics and appliances, you might be overloading your power strip’s electrical availability. If this happens, it’ll spark—creating a fire hazard. Even if you need to plug in your appliances, you can remove any flammable materials away from your power strip, reducing any dangers while maintaining household functionality.

By: Jason Lee

Ever look at old family photos? You remember, the faded picture with the brown couch, wood panel walls and yellow(ish) shag carpet. Most people look at the photo and see these things and the smiling faces of the family. We look at these photos and are taken back to a time when another generation set the rules.

But looking a little more closely at the photo of years gone by, you might notice something that is still around the old house and room today. Hidden in the photo, but still prominent in the room where the photo was taken, is that old, painted over two prong outlet. You know the one. It had the gaudy horse-carved table lamp plugged into it. At one time it was white but it was painted to match the wall color when the paneling came down and the sheet rock went up. You changed the entire look and feel of the living room over the years but that outlet stayed the same. And, why not? It only served one function and how often does technology change, right?

The two prong outlets had been the norm for so long and years of remodeling and redecorating never seemed to affect the outlets. No upgrades were required. Just slap a new cover on it and it was good to go. When “new technology” came about, we were ready with the “cheater” outlet that still enabled us to use three prong electronics with the old two prong outlets.

But soon everything seemed to require three prong outlets and that left us having an abundance of those grey three-to-two prong adaptors in our junk drawer.

Old photos are great to look at and reminisce about past times. But, we are constantly changing and our technology is expanding at a rapid rate. Modern times call for modern outlets. Two prong outlets had a good run and they served a valuable purpose, but there comes a day when the grandfather, who led the head of the family for years, has to retire and give way to change and a new way of doing things.

Outlet changes should be made because today’s outlets give us piece of mind, safety and convenience. Safety has been a top priority for new outlet designs. All modern homes, those built after 2008, should have child-proof outlets installed.

Today’s modern three prong outlets come with a variety of features for convenience and safety. Although the days of the two-prong outlet are numbered, modern GFCI, child-proof and combination outlets will never forget their roots.

It may not seem important today, but summer and warm weather is not that far away. It is time to start thinking about how you are going to beat the heat this summer without trying to run your AC at full throttle. That only leads to more problems that will ultimately lead to you spending a lot of money trying to keep cool. There is an option. Ceiling fans are an excellent way to create a cool breeze in the home. All you need to do is call an electrician in Beverly Hills, like those at The Electric Connection.

A fan in the bedroom is a welcome addition that can help you sleep better at night, especially on a day when the temperatures are warm. The breeze is very light. It keeps the air from becoming stale, which can make the room more comfortable. A ceiling fan installed by a Beverly Hills electrician will ultimately save you money on your electric bill. The fan will pull the hot air out of the room, making space for the cold air that comes out of the vents in the floor. This helps reduce how often your AC has to kick on to keep the room cool.

There are various styles and sizes of ceiling fans to choose from. You will want to make sure you choose a fan that is suitable for the size of the room. A nice addition is a remote control feature installed by an electrician. Beverly Hills homeowners won’t have to worry about pulling on a chain to adjust the fan speed or to turn off the light. This is an excellent feature to have, especially when you are lying in bed at night. Give The Electric Connection a call today and schedule your ceiling fan installation.

The Seattle Mariners may have just upped their game when they retrofitted their clubhouse with an LED lighting strategy focused on intensifying the moods, energy levels and performance of their players.

In an article published in Architectural SSL, Stan Walerczyk highlights five core areas of our life where lighting effects human physiology and performance:

Circadian Rhythms — a case study by Ephesus Lighting, when the University of Phoenix replaced their metal halide fixtures with LEDs, they experienced a 75% reduction in energy consumption, a statistic that probably took the sting out of the initial investment. The long-term benefits of LED lighting (less maintenance, a reduced carbon footprint) offer less in the form of immediate gratification, but trickle their gifts throughout future generations.