If you have an electric car, you may have been excited with the idea of saving money on gas while doing something great for the environment. Unfortunately, your car may not be meeting your expectations. What many people don’t know about electric cars is the fact they can only go about 60 miles or so before they need recharged. If the car is out of juice, it will have to rely on gas and still cost you money. An electrician in Santa Monica, like those at The Electric Connection, can help you make your electric car work for you.

The electric cars are often sold with a standard, slow charger that runs on 120-volts. It can take about 24 hours for a car to be fully charged. It isn’t often you can sit at home for a full 24 hours to allow your car to become fully charged. Because of this, your electric car is not saving you as much money on your gas bill that it could be. You can opt to have a fast electric car charger, technically referred to as a Level II charger. You will need a Santa Monica electrician to install the proper outlet for the charger. This faster charger will charge your electric car in about 6 to 8 hours.

The Level II charger will require a 240-volt outlet to be plugged into. This isn’t a standard fixture in a garage. In fact, most homes only have one or two of these outlets and they are dedicated to the dryer and air conditioner. You invested in an electric car in order to decrease your dependency on gas. Make it work for you with the help of an electrician. Give The Electric Connection a call today and schedule your appointment to have a 240-volt outlet installed.

When it comes to the success of a Generac® generators to all of our clients.

A standby generator provides predetermined processes and equipment within your business with electrical power in the event of an outage or emergency. As soon as there is an interruption in your power supply—no matter the cause—your generator will kick into gear, bringing you a reliable solution to electrical interruptions. And when normal power is restored, your generator automatically returns to standby mode, ready and waiting for when you need it next.

Generators are available in a variety of sizes to suit any need, making them suitable for any business, large or small.

By: Sarah Trocolli

Father of electricity Nikola Tesla was known for being brilliant, quirky and driven in his pursuits to understand electricity, and after many experiments, Tesla eventually laid the ground work for the modern day Alternating Current electric supply system. As a tribute to Tesla and all the dads around the world, Mr. Electric® presents a few kid-friendly experiments exploring the basics of electricity for a fun Father’s Day activity. The kids can explore electrons, static electricity, voltaic batteries and other simple components of electricity – all under the safe supervision of their dads.

Level of difficulty: Easy

What you need: A dark room, fluorescent light bulb and a comb or woolen scarf.

What to do: Run the comb through your hair or through the wool scarf at least 20 times to let the electrons build on the comb. Then turn out the lights and hold the comb to the bottom of your florescent light bulb and watch the electrons charge the bulb. This is great for learning about electrons, and it can be a fun magic trick! For further explanation, click here.

Level of difficulty: Easy

What you need: Cornstarch, vegetable oil, mixing bowl, large spoon, balloon, and a measuring cup.

What to do: Blow up the balloon, tie it and then rub it on your hair. Mix a fourth cup of cornstarch and a fourth cup of vegetable oil into a mixing bowl, and then put the mixture on a spoon. Hold the spoon with the mixture on it near the balloon and watch the mixture gravitate towards the balloon. This experiment looks like a gooey monster stretching to touch the balloon, and it is a fun way to learn about static electricity! For further explanation, click here.  

Level of difficulty: Moderate

What you need: Distilled white vinegar, five pieces of copper wire, five galvanized nails, ice tray and one LED light

What to do: Wrap five nails with five pieces of copper wire and place them separately in the ice cube tray filled with vinegar. Create a circuit by placing the end of the copper wire not wrapped around the nail into the ice cube tray next to it until each section has one nail and one copper wire in it, and then place the LED light in the tray. You have just created a Voltaic battery! For further explanation, click here.

Level of difficulty: Challenging

What you need: Eight D-sized batteries, mason jar or other clear glass, electrical tape, pie pan, scissors, toilet paper tube, mechanical pencil refills and two sets of small alligator clips.

What to do: Connect the batteries positive to negative to create train of batteries. Place the toilet paper tube in the center of the pie pan and using electrical tape, attach the alligator clips and mechanical pencil refills to the tube. Place the mason jar/glass over the tube and connect the other end of the clips to the batteries. After the batteries have a few minutes to charge the circuit the mechanical refills will begin to glow and you will have a DIY light bulb. This is a great way to show that household items can be used in an innovative way. Exercise caution, as this experiment exerts heat and can cause the glass to become very warm. For further instruction, click here.

We hope these electrical experiments provide an enjoyable experience for dads and kids to spend quality time together while learning lots and having fun. Thank you to all the fathers who enlighten children and empower the thinkers of tomorrow. Happy Father’s Day from everyone at Mr. Electric!