Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.

While many home improvements are well-suited for DIY projects, electrical work requires the skill and experience of a fully licensed electrician. The potential for injury and damage to your home from improperly-installed electrical circuits and fixtures is too great to risk doing the work yourself. In fact, we’ve written about the many dangers of DIY electrical wiring before.

To avoid issues and keep your home running properly, you’ll need to hire a qualified Maryland electrician. Experienced electrical contractors can help you properly install new outlets, wire a new addition or remodeled room, install a ceiling fan, and so much more.

Finding a qualified electrician among the large number of choices in the Maryland can seem daunting. However, there are several good places to look for Maryland electricians whose work you’ll be happy with.

Once you’ve found a few qualified electricians, you can narrow down your list by looking at only those who are licensed in the State of Maryland. You’ll also want to check out ratings on review sites, how many years the company has been in business, and available service offerings—such as 24-hour electrical service.

At Kolb Electric, we have a full staff of licensed Maryland electricians with experience in a variety of home repair and construction projects. To learn more about finding a qualified electrician in Maryland and/or to schedule an appointment with our experts, call us at 877 287-1179 or fill out an online contact form today. Check out our reviews to see what makes us a great choice for any project!