Dark spaces can be trouble for many different reasons. If you are trying to navigate a dark space, like your back yard or the outer areas of your landscaping, you risk suffering an injury because you can’t see. Dark spaces also tend to invite unwanted critters. Animals big and small will appreciate the darkness so they can skulk around without being detected. You also have to worry about people who may vandalize or burglarize your home, outdoor furniture and décor or even your cars under the cloak of darkness. It is a good idea to invest in landscape lighting that completely lights up the entire area. An electrician in Pasadena can make that happen for you. The team at The Electric Connection knows how important it is to keep your home secure and can get you set up with the right lighting.

When you have a Pasadena electrician install landscape lighting, you are not limited by an extension cord. You also don’t have to worry about whether or not a solar light is going to get enough sunlight in particularly shaded areas of the landscaping. With the proper lighting scheme, you can light up every corner of the yard, including under bushy shrubs and full shade trees. You don’t have to leave any area in the dark.

In fact, you can create a lighting scheme that enhances the property and doesn’t give it that sterile look. Add soft lighting or pretty colors to act as an effective security measure, while making the landscaping look gorgeous, even in the dead of night. This kind of job needs to be handled by an electrician. Pasadena residents will love the freedom of putting lights anywhere and the ability to control when they come off and on. Give The Electric Connection a call today and get your landscape lighting installed.

If you are interested in learning everything about electricity, you should start by understanding the basic components that make up any electrical design and how they work. Think about how the great pyramids of Egypt were built using just blocks of rock. The rocks themselves were nothing, but when combined with careful design they formed such grand structures!

Similarly, you need to know about the basic electrical components and how they work together to create wonderful modern electrical systems. Below you will find information about the most common electrical components:

The very first component that you should know about is the resistor. It is fairly easy to assume that a resistor, as the name suggests, will resist electricity that flows through it, and you would be correct in that assumption too! Any situation that demands the flow of current to be controlled at a desired level will require a resistor.

Here are two scenarios that better explain what a resistor does. In both cases, we will be turning on a LED:

Scenario 1 – Without Resistor

Scenario 2 – With Resistor

If a resistor is like a cushion that is used to control the flow of electricity, then capacitors are like small rechargeable batteries that store small amounts of charge in them. Capacitors do two things at the same time:

By so doing, they are able to stabilize almost any circuit. There are two types of capacitors that are primarily used:

I briefly alluded to LEDs in the scenarios that were used under “Resistors” above. LEDs are just like bulbs except that they are extremely reliable. You can find them on practically every appliance in your home that features some kind of an indicator light. A typical LED bulb can last decades with no sign of dying.

Since they are so reliable, they are used to indicate the state of current at any point in a circuit. An important task like checking the output voltage or current on a circuit becomes simpler with these light-based indicators.

The resistors, capacitors, and LEDs are the simple stuff in electrical circuits. Now, let us talk about the first complicated component – the transistor. Transistors are used to build complex electrical systems, such as amplifiers for instance. A simple way to understand transistors is to think of a switch. A basic switch has an “on” and an “off” state. These are controlled by the position of the switch, which is changed manually.

A transistor is a more advanced switch that has multiple output states. Unlike a switch, you cannot change these states manually. The only way to switch the transistor between various states is to run current through it. By controlling the current that flows through the transistor, you can control the output state to achieve the results you desire.

Indoor Generator Provides 20,000 Watts of Stored Renewable Energy to a Ranch Home, Even When All External Power Supply is Unavailable

Dallas, TX  December 30, 2011– Doug Kerr is the proud owner of a stretch of land located in the rural area of Kaufman County (Texas) where the air is fresh and the hustle and bustle of city life is non-existent. One thing Doug’s land doesn’t have, however, is a city power grid. Traditionally, to gain access to power in an area that hasn’t already been included on the electrical grid, you can pay the local electrical provider a large sum to run new electrical service to your location, or be forced to use noisy, polluting, and high-maintenance fuel-powered generators.