An electrical panel upgrade in Fairfax, VA should require careful consideration. After all, an electrical panel is basically the heart and soul of your home’s electrical system. Replacing it can mean all the difference in how you’re able to live in your home, especially when you need a steady flow of electricity for all lights and appliances. You certainly don’t want to wait too long in getting an upgrade, or else you have to start relying on candles for all of your home’s lighting needs.

Many homeowners struggle to find a good time to seek an upgrade. If you’re one of them, you should be on the lookout for:

It is important to know the basic information about workplace electrical risks and prevention, especially if you are working in the Here are some of the most common workplace electrical risks:

Faulty Equipment: Equipment that isn’t working properly can cause electrical shocks. These shocks can cause serious injury in and of themselves, but can also lead to workers falling off ladders or other platforms. Faulty equipment and electrical appliances can also cause fires.

Misuse of Equipment: Workers who do not have adequate training on certain pieces of equipment may not follow all the necessary safety precautions. This can result in electrical shocks or fire.

Misperceptions: Workers may be working on or near equipment which they thought which they thought was dead but is actually live.

If you are working around electrical equipment, it is highly likely that you might encounter workplace electrical risks on a daily basis. Raising awareness for you and your co-workers, in addition to proper care and maintenance of electrical equipment is key in preventing hazards, injury and damage.  That’s why it’s so important to familiarize yourself with potential dangers, learn how to avoid them, and be prepared in case of emergency. Good luck keeping yourself and your workplace safe.

Ground fault circuit interrupters (GFCIs) are common in many homes today. In fact, new homes are required to use GFCIs in certain areas like bathrooms, kitchens, garages, outdoor areas, and unfinished basements. This is because GFCIs provide a level of protection from electrical shock from things like water, which can cause serious injury or even death.

However, GFCIs do need to be reset from time to time. They are designed to shut off if they detect current flowing through an unintended path. If this happens, the GFCI will interrupt the electrical current, which will depower any devices plugged into it and possibly cause power outages at other outlets on the same circuit.

When this happens, many homeowners call us for GFCI resetting help. But you may be able to fix the issue yourself. Here is what you can try before calling the GFCI experts in Arvada.

Tips to Reset a GFCI

A GFCI can be reset without any technical know-how. There are two rectangular buttons on the face of a GFCI, which are usually One is the “TEST” button, and the other is the “RESET” button. Some GFCIs also have an LED light that may illuminate when the GFCI  trips . When the TEST button is pressed, the RESET button will pop out if it isn’t already. To reset the GFCI, simply push and hold the RESET button until it latches.

GFCI Experts in Arvada

If the GFCI will not reset using the above procedure, you’ll want to call an electrician. There could be a problem with the outlet itself or the wiring in the circuit. There could also be an issue at the breaker box or somewhere else along the line. When working correctly, your GFCIs should be reset without much issue, so, if they aren’t, there may be something else causing the problem.