CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

As a homeowner, you might not be aware of all the features your home has, especially when it comes to your electrical system. It’s like another occupation trying to keep up with your home’s appliances and making sure everything works properly. One of the things, however, that is so important to take care of is your electrical system and the features that are involved or connected to it. Not only does it help to understand your electrical system and what it can do for you, but it will also help you become more efficient especially when you’re trying to save money on your utility bill. Keeping your family safe is also a necessity, so keep these electrical features in mind and know how to keep your home safe with your electrical system.

Once you understand your electrical system and know how it works, you’ll notice a host of beneficiaries. You’ll be increasing the safety of your home, especially when a small problem arises and you’ll know what to do in that place and time. Meanwhile, you will also know how to avoid any potential problems and end any lasting effects that can be damaging to your home. And on top of all these benefits, you will also decrease your monthly utility bills. What’s better than that? Knowing your electrical system allows you to understand what works efficiently and what doesn’t, which avoids the cost of wasted money in the long run. Lastly, you can make smarter energy consumption choices. You’ll be able to identify which habits work for you and your family and which ones are affecting your lifestyle and costing you more out of pocket expenses.

Nothing is more important than your family's safety. That's why you need to make every effort to identify and eliminate fire risks in and around your home, particularly in your electrical work. Faulty wiring, delayed maintenance or carelessness can lead to a disaster that can cost you your home and endanger your life. Read on to learn more about the most common causes of electrical fires and how you can prevent them.

Power in Percentages

Electrical failures contributed to about 47,700 home structural fires in 2011, according to a report by the National Fire Protection Association (NFPA). Those fires resulted in 418 deaths and $1.4 billion in damage. Clearly, the stakes are high in making sure that the electrical work is safely installed in your home.

According to the NFPA's report, 48 percent of home fires caused by electrical failure were started by the electrical distribution and/or lighting systems. Of that 48 percent, 63 percent were started by wiring, 20 percent by lighting, 11 percent by cords and plugs, and 6 percent by transformers and power supplies.

Fans caused an additional 6 percent of electrical fires, washers and dryers another 6 percent, space heaters 4 percent, air conditioning 4 percent, water heaters 3 percent and stovetop ranges 3 percent.

Don't Become a Statistic

The good news is that electrical fires have declined steadily since the 1980s. Modern technologies and building techniques have lowered the risk of fire and kept everyone safer. However, there's no reason to be complacent when it comes to safety. To decrease your risk of falling victim to a fire caused by your electrical system, follow these tips:

Keeping Your Family Secure

Stay vigilant about maintaining your electrical equipment and follow all safety recommendations to reduce your risk to a minimum. If you are concerned that your home is at risk of fire, have a qualified electrician inspect your electrical work and point out any danger areas without delay.