Saving on electricity is always the smart way to go, and you’ll find that you can keep monthly bills way down if you just do a few smart things to cut back on your electric power consumption:

Use Fans instead of AC – Winters in Texas may be warm, but the summers are comparable to sitting in the desert. You’ll find that using your AC is the only thing keeping you alive, so the thought of turning them down may be making you sweat. Turn down the AC a few degrees, and turn on some fans around the house. The breeze will cool off the home, and it will blow the cool air around nicely.

Switch Out Light Bulbs – One great way to save on electricity around your home is to use energy saving bulbs. An 18W power saver will produce as much light as a 60W regular bulb, but only use 18W. It will be a steep initial investment to replace all of the light bulbs – the power saver ones are costly – but it will cut your electric bill dramatically.

Use Power Strips – Your TV, DVD player, radio, Xbox, and other devices all use power when they’re turned off, as they’re in standby mode. You should consider plugging all of these devices into a power strip, and just turn off the power strip at night. It will cut down the amount of energy that’s used, and you’ll never know the difference.

Reduce Appliances — Do you really need a toaster, microwave, dishwasher, blender, food processor, juicer, two coffee machines, an espresso maker, and a coffee grinder? You probably need some of these appliances, but you can probably eliminate a few of the ones mentioned above. Use more gas-powered appliances, as gas is cheaper than electricity.

Replace Old Appliances – Did you know that older appliances tend to use a lot more electricity than newer ones? Newer appliances are made according to Energy Star regulations and standards, so they’ll be cheaper in terms of energy consumption. Replacing them will cost you a bit, but you’ll recoup your investment within a year or two.

Turn Down the Heater – If you are using an electric boiler to heat your water, chances are you’ve got it set too high. You probably want to enjoy a nice shower in scalding water, but most people have to turn on the cold water when they shower. If you want to save on electricity, turn down the heater until it’s just nicely hot instead of scalding. You won’t have to turn on the cold water to shower, and you’ll still be able to enjoy a nice hot shower!

Saving electricity isn’t just smart – it’s cost-effective and wallet-friendly as well!

How often have you found yourself considering getting some vacuuming done in your home, only to put it off because it’s simply too much physical work and takes too much time? Vacuuming a home, especially a multi-story home, can be an unpleasant and cumbersome chore. If procrastinating about cleaning your home is something you do often, you should consider installing a central vacuum system to make the job much easier. With a central vacuum, you only need to carry a lightweight hose attachment around the house. You then plug it into a local outlet that connects to a central pressurized suction system. You can vacuum the area around the outlet, and all the debris is moved to a single collection point that you can empty at your own convenience.

Putting in a central vacuum in a home is a complex process that requires numerous special tools and knowledge of ventilation systems, so you must have professionals handle the work. To arrange for central vacuum system installation in Needham, MA, install a central vacuum system, the technicians first determine the number of outlets necessary and then place both the outlets and the power unit: i.e. the vacuum itself, which is housed out of the way in the garage or basement. Once the installers have these two different sets of terminal points in place, they install a trunk line that runs from the vacuum through the walls. From this trunk line, they branch off a number of flexible tubes to connect to each outlet. The technicians must run voltage wires along the trunk and the tubes back to the vacuum unit, since the portable cleaning attachment requires electrical power to run.

It is also important for the installers to set up an exhaust system for the power unit. It’s optimal for the vacuum to vent directly through a wall, but if this is not possible because of the placement of the power unit, the installers will instead run exhaust tubes to a roof vent.

Once all the parts are in place, the installers perform a vacuum leakage test to make sure there are no spots along the trunk line or branch tubes where there is any air escaping.

Afterwards, you can start enjoying a cleaner house with much less work. Contact us today to find out more about this and other electrical installations we do in the area.

With the professionals at FB Electrical Services on the job, you can expect to have your central vacuum system installation in Needham, MA complete in a few hours.

In recent years, homeowners throughout the country have becoming increasingly reliant on appliances and electronic devices. Many don’t realize this, but that means that the electrical demands we are placing on our homes are much higher than they used to be, and our homes may not be well-equipped to handle it.

You may use small, portable surge protectors or power strips in your home to plug in things like your TV, or computer equipment. However, this is typically not sufficient enough to really protect your home and electronics against the dangers of power surges. Fortunately, there is a solution—whole-house surge protection.

As we mentioned above, you may utilize power strips to plug electronics such as your laptop or entertainment equipment into. This isn’t necessarily a bad idea, as it does serve a purpose. However, the more demand you place on these, the higher risk there is for your electronic equipment.

Whole-house surge protection helps guard your electronics and appliances against a large power surge. Remember, a power surge can do more than just cause your lighting to go out or kill the battery in your laptop. It can damage your HVAC system and any other large appliance that’s hooked up to your home’s electrical system. Systems do not even have to be operating or turned on at the time for a power surge to damage them.

If you want full protection for your home and electrical system, then you need the right type of surge protector. No matter what type you choose, it’s important to have it professionally installed to ensure that it works properly and really does protect your electrical system when needed.

Available in a variety of shapes and sizes and with multiple base types, these long-lasting LED bulbs are perfect for an elegant, vintage look. Chips-on-board (COB) LEDs imitate the look of thin filament wire in antique-style bulbs and emit a rich, warm white or ultra-warm white color. The decorative bulbs are great for many applications, such as chandeliers, wall sconces, ornamental fixtures, and light strands, and they consume only a fraction of the energy consumed by incandescent bulbs.

 

There are different things that you may do in order to see to it that you will be making the most efficient and the best possible use of the energy that you channel into your home. There are different options that you may tap in order to determine whether you have to make certain adjustments in your home’s energy system, one of them being Princeton energy efficiency audits. If you own a house and if you still have not had this process performed in your home, then it is highly advised that you do so in order to save.

Home energy audits allow you to carefully and efficiently pinpoint the energy needs that the different pieces of equipment in your home mount up to. Going through this process will give you an idea of how much energy you really need in order to keep your household running smoothly.

By having a professional audit done, you will not only allow you to see to it that you will have ample supply of energy for the different parts of your house, but will also keep you from overshooting your expectations and supplies. Without having to say it, you will be able to efficiently channel enough energy into the different parts of your home and ensure that you will not be using up more than necessary.

There are different standardized tests that are employed in order to determine the amount of power and energy that you need to have your home equipment run effectively and efficiently. More than measuring the needs of your whole house, you may even have other tests employed for individual rooms and areas, allowing you to map out and determine the energy needs and consumption that you may expect from the different areas of your house.

When you get the time and want to save on your monthly energy bills, it will be best for you to have Princeton energy efficiency audits done. tests employed to ensure that you ware able to make the most efficient use of your home energy.

Needless to say, home energy audits are always performed by professionals. Unless you have some type of background in the electrical/ energy field, it will be impossible for you to even know how to employ the necessary tests.

Don’t worry about finding the time to test the energy using devices in your home. Drop your local electrician a line and he will most likely be willing to perform this job for your home. Princeton energy efficiency audits can save you time and money when done right.