Every home needs upkeep and maintenance, especially older ones. The electrical switches and outlets are often overlooked. Although any particular outlet may not be important, if it isn’t working it’s likely a sign of a larger problem. Switches usually aren’t replaced when they should be but rather as an afterthought when they stop working altogether. Even if an electric outlet or switch is still working, there are times when you should go ahead and have them replaced.

Modern Standards

In some instances the existing switches and outlets simply aren’t up to code for what is considered adequate and safe. Older outlets may not have a ground plug but only two holes. There are adaptors available for such a problem, but they really don’t provide a proper ground like your outlet should have. With a switch, if you have to jiggle it or flip it on and off a few times for it to work, it has a bad connection and isn’t safe.

Better Quality

Simply put, newer switches and plugs are better quality than old ones and continue to develop and become even better. As long as everything is working you may not need to go out of your way to start making replacements, but when you make remodels or more extensive repairs it’s a good idea to have your electrician go ahead and replace the switches and outlets for the area he’s working in.

Ugly

Sometimes old outlets get to the point that they show their age. They can develop deep stains that won’t come clean, or perhaps they’ve been painted over the years. Worse yet are chips, scratches and cracks in the outlet or switch. Although these things are typically nothing but an eyesore, they can be a dangerous fire hazard if the damage goes into the structural aspect of the unit.

Conveniences

Christmas is just around the corner, and many families are decorating their homes. During the holiday season, when the sun sets early, decorative lights along the streets and homes can bring a sense of warmth during the cold and dark evenings. When decorating your home, take extra precautions so that your lighting installation is safe from electrical hazards.

Ensure light bulbs don’t come in contact with flammable items (i.e. paper, cloth). Over time bulbs can generate heat and transfer this heat into nearby material that can lead to a fire. Although decorations look beautiful lying atop Christmas cloth, keep an eye on them if the lights are to be left on for a significant amount of time.

With this same issue in mind, don’t leave any lights unattended in the home. If you are leaving a room for an extended period of time, unplug the lights. Should a fire start, and no one is nearby to address it quickly, you could risk losing more than just a Christmas tree.

When hanging your lights do not use nails or staples that can penetrate the wires. If the protecting rubber and plastic is pierced, the exposed wires can lead to an electrical fire. The heat from the wires can heat up surrounding material and moisture exposure can cause sparks.

Ensure your lights are rated for outdoor use should they be used on the outside of your home. Some lights tend to be more delicate and not weatherproofed and are intended for indoor use only. Should it rain or snow, you may find it necessary to replace all the lights on the exterior of your home.

Once the holiday season has come to an end, take down the lights. Christmas decorations and lights are not designed to be exposed to the elements 365 days a year. After an extended period of harsh weather and temperature fluctuations, wires can deteriorate. This means that you could risk an electrical fire if you do not replace the lights. Saving time and effort by leaving your lights up year-long can cost you money.

When connecting strands of lights, check each connection carefully so that it is tight and secure. The connection prongs can become exposed during wind gusts. If they are already exposed you can risk experiencing electrical surges when exposed elements come in contact with the elements.

You also want to avoid overloading power outlets and extension cords. Too many strands attached to the same extension cord, or chained extension cords can be dangerous. A good rule of thumb is to limit the strand length to no more than three chains of lights.

The Christmas season can be warm and inviting, but without the proper precautions you can risk losing more than just a few presents under the tree. Take some extra time when decorating this season to ensure that your family and home are protected. For more information or for a help from a licensed electrician, contact your local Expert Electric at 604-681-8338.

The following post is from our new blogger Annie Josey, who is joining Pegasus Lighting on May 21, 2012. Annie is a recent UNC-Chapel Hill graduate who majored in English with a minor in creative writing. Annie wrote this post during the interview process and we loved it so much, and learned a little bit about art in the process, we could not wait to post it to the blog. We hope you like Annie’s first post as much as we do, and can’t wait for her to “enlighten” us even more in the coming months.

In paintings, the depiction of light can create tangible shape, intricate texture and vibrant color. Great painters like Rembrandt, Caravaggio and Manet crafted careers out of working with light, while having very few lighting options for inspiration. Here are a few examples of their work, and how each painter might go about achieving the same schemes with modern lighting:

The employment of lighting in this Manet painting differs greatly from Rembrandt and Caravaggio. Instead of valuing shadow to illuminate dimension, Manet uses full frontal lighting to emphasize color – bright reds, whites and yellows.