Someone would think that a bulb is a bulb is a bulb; well that isn’t really the case. Anyone who has bought a light bulb will know that there is a large variety to choose from. These bulbs don’t vary only in terms of their illuminating power, size and application, but in type as well. It can be quite a challenge to choose the right light bulb for your home.

However, it’s important to understand that something which is in vogue need not always be the best solution for your home, your energy bills or even the environment. You should be aware of the different types of bulbs available in the market and what their properties are.

This will help you make a more well-informed choice and will help you save on energy costs too. When you are choosing bulbs for your home the factors you should keep in view are the upfront cost, light output, the settings and fixtures the bulbs can be used in, energy efficiency and how environment-friendly they are.

When it comes to home lighting in Australia, there are 4 different types of bulbs you can choose from. Let’s take a look at their features and how they stand up against each other in terms of efficiency, cost & environment-friendliness. Just as home design trends come and go, so also is there a change in home lighting trends.

The upfront costs for these bulbs are very low (it’s also why they are so popular), but they are expensive to run. These bulbs produce a warm light and are a good option for lesser used areas like a laundry or bathroom. The Government doesn’t really recommend using these for general home lighting as they are inefficient and because their running costs are higher. In fact, the Government is also making every effort to phase out these bulbs. They are doing this by introducing MEPS (minimum energy performance standards) for all lighting products.

These bulbs use tungsten elements and have higher efficiency levels compared to incandescent ones; they are longer lasting too. Unfortunately, there are many disadvantages to halogen lights. Typically, these lights are best used to light smaller areas that require focused lighting. However, most people tend to use them to light larger spaces and they end up consuming much more electricity than they should. The Government is phasing out certain types of halogen lights too.

These are a very popular choice and many homeowners use them. They are energy-efficient, have a lifespan that’s 4-10 times longer than that of any incandescent bulb and are available in cool/neutral/warm tones. They are more expensive than incandescent bulbs, but are far cheaper to run in the long term.

Today, these are proving to be a highly efficient alternative to CFLs or incandescent bulbs. Their initial cost is significantly higher, but they offer 80% energy efficiency and last for a number of years. Since they last for so long, they are easy to maintain and are a good home lighting choice.

For any additional information about the different types of bulbs and advice on which type will be best suited for your usage and home, call Allround Electrical at 1300 169 263 and speak with our experts. We can provide you the best electrical solutions at the most reasonable pricing. You can also drop us a line via email or use this contact form and we will revert without delay.

Thanks for reading,1300 169 263

Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

 The list of issues concerning the supply of electricity in Texas is long.  First, the state has its own power grid, so it is essentially isolated from the rest of the nation.  It can’t get power from the outside during peak demand periods.  Plus, new rules from the EPA went into effect January 1 to reduce greenhouse gas emissions, forcing the immediate shutdown of two power plants in the state.   On top of that, since all power plants need a supply of cooling water to operate, the state’s drought and low water tables may force up to 3000 megawatts of power-generating equipment to shut down as early as May.  According to Plano, TX electricians, one plant was forced to shut down in 2011 for lack of water.  Add to this an increasing population and projected record summer temperatures, and the likelihood of blackouts will be at an all-time high.

Fortunately, for customers of Texas power utilities, it is possible to avoid the headaches and potential damage to electrically-operated appliances in a blackout with some foresight and wise investing.  By using a savvy electrician, Plano TX residents can take advantage of the latest technology in back-up power systems to service their houses during power outages.  Homeowners can continue to enjoy all the creature comforts they expect, even if their neighbors are in total darkness.

The latest advancement in backup power supplies is the Indoor Generator, which uses a bank of batteries to provide emergency power to the home.  Unlike traditional engine-driven units, these indoor generators are quiet, require no messy fuel handling, have no smell, and produce a more efficient supply of power for home appliances.  Even better, customers don’t have to use power from the power company to charge the batteries.  Renewable energy sources, like solar and wind power, can be used to charge the batteries by installing solar panels or a wind turbine along with the unit.

A reliable, reputable Plano, TX electrician can set up customers with a system like this quickly thanks to innovations such as the Power Cart, a mobile trailer which combines a battery-based indoor generator with four solar panels and an optional wind turbine.  The indoor generator takes advantage of the sun and wind when available to power the batteries, relying only on the power company or second backup generator if the batteries deplete.  The system can provide a continuous 3.6 kilowatt output, and has on-board electronics to tell the Power Cart to sell power back to the power company using wind or solar power when possible.

When you’re shopping for new heating and air conditioning equipment, you may want to give a second thought to a heat pump. Heat pumps use electricity to heat a home, but they do not use nearly as much energy as conventional electric furnaces. Plus, a heat pump is primarily an air conditioner, so you get an all-in-one system that requires less maintenance and works more efficiently.

Want to know more? Our heating and AC technicians are here to answer all of your questions and make sure you end up with the right home comfort equipment for your home. For more information, contact our friendly technicians, and read on for a brief overview of the heat pump system.

A heat pump uses your central duct system to move heated or cooled air out to the various rooms of the home. It also has an outdoor compressor unit, just like a conventional whole-house air conditioning system. The indoor unit is joined to it by the refrigerant line.

Refrigerant is a chemical blend capable of moving heat from one place to another. When in cooling mode, refrigerant absorbs heat from the inside of the home and moves it outside. That’s how the cooling process is started.

A reversing valve works along with some other parts to give a heat pump the ability to switch into heating mode. The refrigerant can work in reverse and also absorb heat from the outdoors and move it inside for whole-home heating.

What makes a heat pump so efficient is that the process of moving heat from one place to another uses so much less energy than the process of generating heat (like furnaces and boilers do). When you examine other electric heaters, like portable units and electric furnaces, there is no comparison in the amount they are able to save each month.

Sometimes, a gas heating system is a better option. Efficiency does suffer as temperatures drop, and the cost of gas heating is typically lower than the cost of electricity. Ask a technician to help you decide what the best choice is for your home.