There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.

To commemorate our fifteenth year, we are taking a look back at what life was like 15 years ago. Do you remember May 1999? It was a month of ups and downs. We gained Star Wars: The Phantom Menace but lost Shel Silverstein. Natural disasters of epic proportions and new leadership in world powers made the month one that would change the course of history. Legal precedents were established and technologies that we all utilize now were just being announced. Here are fifteen moments in history from fifteen years ago. Next stop: May 1999.

1. Bluetooth Is Announced

Early in the month, for about six days, 152 tornadoes ravaged the mid-west and eastern U.S. It was the worst in Oklahoma, with one F5 tornado – the second strongest recorded in U.S. history – that caused $1 billion in damage.

3. Goodbye, Shel Silverstein

In Milan, Italy, after 22 years of restoration work, Leonardo da Vinci’s newly-restored masterpiece The Last Supper was put back on display. This is an unforgettable moment in art history.

5. The Ancient Operating System

via wordpress.com

The Mummy, a horror adventure starring Brendan Frasier, was released in the U.S. in May 1999. Although the film was originally meant to be a low-budget horror series, it turned into a blockbuster hit.

7. Not So Entertaining Anymore

Star Wars: The Phantom Menace was released in theaters, and millions of children began having nightmares about red-eyed guys with horns chasing them with two-sided light sabers. And we thought Darth Vader was intimidating…

9. Italian Stallion of Politics

Teenie boppers lost their minds as they excitedly tore open the packaging on their copies of The Backstreet Boys’ newest release, Millennium.

11. Here’s SpongeBob!

Kansas City, Missouri, wrestler Owen Hart (Blue Blazer) fell 78 feet to his death while being lowered into a World Wrestling Federation ring during WWF Over the Edge.

13. So Long, Home Improvement

The Dow Jones Industrial Average closed above 11,000 for the first time in its history at 11,014.70. Many speculate in hindsight that this bump was actually artificially created by overlending and that in retrospect this was a warning sign for the future recession. It was a cause for celebration then: Now, it’s something from which we have hopefully learned a lesson. 

The Christmas carols are already playing nonstop in shopping malls and on the radio. Before you know it, Christmas day will arrive. Whether that means flying off to visit far-flung friends and relatives, or inviting the extended family into your own home, follow these tips to have a meaningful, and safe, holiday season.

Your Christmas Tree 

The tree is the monument around which many families' Christmas celebrations revolve. But beware-- every year an average of 210 homes experience fires caused by their tree, according to the National Fire Protection Association.

To avoid becoming an unhappy statistic, look for a tree with fresh needles that isn't dried out, and place it in an area clear of any heat sources. Use LED light strands, which produce very little heat, and never hang actual candles from the tree. Dispose of it after Christmas once it starts getting dry and the needles are falling off. If you use an artificial tree, make sure it is labeled “fire resistant.” 

You also want to ensure the tree is set up securely. At best, a fallen Christmas tree is a shame, and at worst it could cause a hazard, possibly knocking over other items and leaving broken glass, frayed wires, spilled water in its wake.

Don't forget about wire safety. Make sure that none of the cords to your lights are frayed and the plugs are in good working order. Try to avoid an extension cord, but if one is necessary inspect it as well, and ensure it doesn't present a tripping hazard in your house. Finally, don't overload a single outlet with too many lights or you can risk tripping the circuit or even  creating a fire hazard. 

Candles

Candles are an important part of many family holiday decorations, and not just for Christmas. The menorah is a centerpiece of the eight-day Hanukkah celebration, with a new candle lit each day. And people who observe Kwanza light candles to commemorate seven principles of African heritage. Whatever religious or secular tradition you follow, candles bring warmth and light to stave off the darkness of winter. 

While the candles are beautiful and significant, their open flame can also be dangerous to people, pets and your home. For safety, lit candles should never be left unattended, and never placed in an area where a child or pet could get burned or knock them over. Also make sure they aren't near any flammable material like curtains.

If you want to make a semi-permanent window scene for the holiday, it's better to get an electric menorah or other display, and save the real candles for a supervised  and temporary ceremony. 

In the Kitchen

The same precautions that apply to candles also apply to gas stoves and their open flames. Take care that guests don’t bump into the stove or hot pots and pans. Also, some cultures call for fried foods, such as the Hanukkah tradition of frying potato latkes and jelly doughnuts. Enjoy the delicious meals but be careful not to splash cooking oil around the kitchen, which is another fire hazard.

Your Outdoor Display 

It's fun to turn your yard into a scene from the North Pole. Just make sure that any lights and other equipment is rated for outdoor use and won't short out in a snow or rainstorm. As with indoor lights, inspect the cords for any damage and discard those that aren't in top shape. If you need an extension cord, make sure it's rated for the outdoors as well, and don't let it run through puddles or across walkways.

With just minor precautions, you can ensure a safe holiday season focused on family and tradition.

How to choose LED lamps. The replacement of lamps in an existing lighting system is connected to a lot of doubts when concerning the replacement of the lamp type. Changing the lamp type is a conventional process. The invention of the CFL lamp in the 90’s allowed users to save energy by replacing their energy consuming incandescent lamps. A lot of labels and graphics on the products packages show the replacing types. There are numerous possible influences on a lighting solution. Changing the lamp is changing the most important factor, the lighting quality. Lamps define the light color, color rendering index, luminous flux (light output or brightness) and installed load.

Changing lamps is nothing else than comparing the features of the old system, characteristics like light color, color rendering index and luminous flux should stay the same, suggested the former illumination has been satisfying. Watch the luminous flux (measured in lumen) and compare them to the already installed one and choose an appropriate lamp. Here is an example which luminous flux (lumens are abbreviated by lm) can be replaced by which lamps:

Don’t get confused by all the lighting features from the labels or packages. Concentrate on the characteristics like light color and color rendering index, they should be the same or at least similar. Choose the lamp according to luminous flux in lumens. Be confident when choosing (LED) lamps. They are efficient and offer twice till three times longer service times Metal Halide light sources.