Picture this scenario: you’re sitting at home with your family watching television and enjoying an otherwise run-of-the-mill evening. Then, all of a sudden, *poof*! Your power goes out, leaving you in the dark.

Here’s a quick question: do you know what to do when this happens?

Have a look at our guide to understand your best course of action after an outage. That way, you can keep you and your family safe no matter the situation.

When the power first goes out, take the following steps:

This is a non-issue if there’s a power interruption. But in cases of extreme weather or other emergencies, guarantee the bodily safety of you and your family first.

If you have telephone or cellular service, a quick call to the power company can give you information on the cause, extent and estimated restoration time for an outage.

Depending on the expected outage time, you may want to put a plan in action for your food/water. If the outage is less than two hours, food in your refrigerator and freezer will be fine. After that, however, temperatures may rise high enough to cause food-borne illness. To minimize the risk, avoid opening and closing the refrigerator as much as possible.

In most power outages, municipal water should remain unaffected. However, extreme weather or extended outages could compromise water safety. In cases like this, it’s recommended to avoid using it for anything that could come in contact with your mouth or body:

If possible, use boiled or bottled water to avoid the risk of getting sick.

If an outage knocks out air conditioning during hot weather, your risk of heat stroke will increase significantly. It’s important to identify the signs of heat stroke and address it as soon as it happens. Symptoms include hot/red skin, dizziness or nausea, headaches, rapid heartbeat and a high body temperature.

To reduce the risk of heat stroke, follow these guidelines:

Just like the heat, a prolonged power outage in the cold can quickly create an emergency situation. This holds especially true with most in-home heating systems that rely on electricity in some capacity.

Remaining warm is especially important in these situations. One of the largest risks with prolonged exposure to cold is hypothermia. Signs of hypothermia risk include cold skin, shivering and a body temperature below 95 degrees Fahrenheit. Without proper steps in place, hypothermia can quickly escalate into a life-threatening situation.

Maintaining a warm environment is the most important step in a cold temperature power outage. Use all the following tips to keep your family safe in the cold:

If there’s one thing kids seem to love, it’s playing with everything around the house other than their toys—the more dangerous the better! Electrical outlets in particular are an endless source of fascination for young children, and according to the Electrical Safety Foundation International, hospitals across the country treat nearly seven children for electric shock and burn injuries related to tampering with wall outlets each day. But buying childproofing devices for your electrical outlets can be a challenge, and if you don’t choose carefully they may not fit in your outlets or may be too easy for your child to pull out. So how do you choose?

There are two types of outlets commonly seen in homes—standard and decorator outlets. You can tell them apart by looking at the number of screws they have:

Different types of outlets have different requirements for childproofing materials, so figuring out which type you have is very important. Note that standard outlets will be able to use most childproofing methods—decorator outlets are a little more complicated, but the packages on the items you buy should list whether they are compatible. Remember that most items approved for decorator outlets will not work in standard outlets, and vice-versa, so choose carefully!

Outlet covers, which usually plug right into the outlet, are a good choice for outlets that have “fixed” items that are plugged in all the time, such as lamps or televisions, as well as areas that use large adapters like at the computer. Outlet covers are effective at keeping both infants and toddlers out of the outlets, which means they’ll last for a number of years. Outlet covers for both standard and decorator outlets can be purchased.

Unlike outlet covers, safety outlet plates replace your existing outlet plates and have a small sliding door that covers the receptacle when not in use. These work best for outlets that you have to repeatedly plug things into and unplug things from, such as a vacuum cleaner. They are also difficult for children to figure out and should be effective for many years.

Ideal for outlets that are kept out of site and rarely used, outlet plugs are usually easier for kids to figure out but are still good at preventing access to the inside of the outlet. The good news is that they can be used interchangeably in standard and decorator outlets.

Keeping your children safe is your number one priority, and childproofing your electrical outlets is a great way to do that. Damaged or malfunctioning outlets can also be a major safety hazard in your home, so if you need outlet repair in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

From the National Fire Protection Association, there were 1235 revisions made since 2014. First of all, code-making panels from the NEC created these revisions which were submitted to the NFPA for consideration. Below, find some of the NEC code changes that were proposed and/or made to electrical safety codes.

This change requires the branding of any reconditioned equipment, Furthermore, descriptive markings, trademarks or name must be displayed. Additionally, it enables the recognition of the responsible organization that carried out the re-branding.

Most noteworthy, with the changes in this code, any electrical equipment would be traceable from its worker or buyer.

Added to cover any electrical equipment located in a cramped place. This includes:

This change was directed at checking the provisions of equipment used in limited spaces. Also, it addresses compliance of crawl spaces and ceiling spaces.

This is a general review of 110.26. For any type of working space, conspicuous and permanent signs should be provided.

The above code changes should be followed by engineers, architects and designers. The new NEC Code Changes were developed to avoid complications or unlawful/unsafe activities in the workplace.