Electrical ballast replacements are a common project in both residential homes and commercial buildings. An electrical ballast is a device used to regulate electrical currents so that they do not reach uncontrollable levels. A common application of electrical ballasts is those found in any type of light structure such as fluorescent or neon lighting systems. Depending on the size of the replacement project, a licensed electrician isn’t always necessary; however, if you don’t have the proper tools or experience, it is a good idea to consult with a licensed electrician before attempting the replacement. To simplify the procedure, here are the answers to three common questions about electrical ballast replacement.

Similar to replacing a light bulb, if you have any type of neon or fluorescent light, you will eventually need to replace the electrical ballast in the lighting structure. Replacing the electrical ballast is a more reasonable solution than replacing the entire neon or fluorescent light structure. You will know when it’s time to replace the electrical ballast because the light will begin flickering or will stop working entirely.

Yes, you can perform a ballast replacement yourself. While ballast replacement can be a simple procedure, if not done properly you can cause damage to your replacement bulb but also the fixture. Before performing the replacement yourself, make sure you are confident and understand all the steps involved or you could end up with expensive bills you were trying to avoid. If you require assistance or have any questions about electrical ballast replacement, contact our team of licensed electricians at Expert Electric. We would be happy to help.

Thankfully, an electrical ballast replacement does not require a fully stocked tool shed in order to be completed. For most electrical ballast replacements, a few simple tools will do the trick. Depending on the type and size of your replacement, your replacement may require a simple screwdriver, nut driver, drill, pliers and wire stripper. This is in addition to the new electrical ballast which you will be replacing.

For more information on electrical ballast replacement, please contact the licensed electricians at Expert Electric. You can reach us at 604-681-8338 or you can book an appointment online through our website. For 24/7 immediate response emergency service, please fill out a form on our website so that we can get in touch with you as soon as possible. We offer various types of electrician services including electric water heaters, surge protectors, ceiling fan installation and we service all throughout the Greater Vancouver area and Lower Mainland.

With the start of the school year and the holiday season approaching, it seems as though the mound of expenses just keep piling up. You’re budgeting for school shopping, lunches, holiday shopping and making sure your lights stay turned on. This season tends to be the most expensive for many home owners.

Luckily, we have a few ideas on how to cut back on utility bills and lower your electric bill. We also provide home inspections for everyone in the Northern Virginia area and look at ways you can utilize the most out of your electrical appliances. You may be heading into a time filled with many expenses but you can pad your pocket with money saved from lowering your utility bill. Check out these tips that will help you with your utility bills and give you peace of mind during this hectic season!

Install Dimmer Switches

When you install dimmer switches, you can use only as much light as you need. With a traditional light switch, the only settings are on and off, meaning you are either using 0% electricity or 100%. With a dimmer, you have an entire spectrum of settings in between. Being able to decrease the amount of light you use inevitably results in lower energy bills. Install dimmers in the rooms you use the most like the kitchen, living room, bathrooms, and bedrooms; this will allow you to take advantage of the greatest savings possible.

Keep Your Fridge and Freezer Full

Everyone always tells you to keep the fridge closed. But did you know that keeping your fridge and freezer full can also save money? Food acts as insulation and lessens the amount of time that the fridge has to run to stay cool. This will be easy to do with all of those lunches your family will have to pack for school and for the Thanksgiving and Christmas holidays.

Install Ceiling Fans

Keep the air circulating in your home, and your air conditioner won’t have to work as hard. Ceiling fans can help lower your electric bill by up to 30 to 40 percent. While a ceiling fan doesn’t actually decrease the temperature of a room, the draft makes the room feel cooler – allowing you to raise the thermostat and be just as comfortable. You can even use your ceiling fans in the winter months! Many people are unaware that ceiling fans can be used to circulate warm air during cooler months of the year. By running the blades clockwise, ceiling fans push warm air down from the ceiling without creating a draft.

Get Rid of “Phantom Loads”

A shocking 75 percent of the energy used by home electronics is consumed when they’re turned off. These “phantom” users include: televisions, videogame consoles, stereos, computers and many kitchen appliances—basically anything that holds a time or other settings. A simple solution? Plug all of these items into power strips; then, get in the habit of turning off the strips between uses.  This will cut back on utility bills and will help combat overloading fuses.

Switch to LEDs

LED light bulbs use 90 percent less energy than incandescent bulbs. Switch out the most widely used bulbs in your home. Then, replace the rest as they burn out. LED lights tend to last much longer than traditional bulbs so you won’t have to replace them as often – saving you money.

BMW, Honda, Ford, Mitsubishi and Nissan all offer full electric vehicles; however, despite the groundbreaking technology introduced in the new crop of electric cars, sales of pure electric cars that run off of a battery alone have risen by only about 6% from the same time a year prior, according to Edmunds.com, the leading automobile information company.  An analyst from Edmunds.com believes that what he calls “range anxiety” prevents most consumers from purchasing fully electric vehicles. It is also widely believed that this slow increase is due in part to the high prices of these vehicles. Furthermore, there is very little public charging infrastructure, which can make using an electric vehicle as a primary vehicle difficult for many consumers.

The sales of hybrid vehicles, on the other hand, are going through the roof. These automobiles travel using their battery power until a traditional gas engine turns on. One of the main reasons that hybrids are doing so well is because of the plethora of options. Hybrid vehicles eliminate much of the anxiety associated with limited range due to their ability to use a gasoline engine in addition to their plug-in battery. The proposed Ford C-Max Energi, for example, can drive for approximately 20 miles on electricity alone and an additional 530 miles with its gasoline engine. This makes them not only practical for everyday use, but also for longer trips. As a result of the variety of options and advancement of the technologies in these vehicles, sales have soared 381% in the first half of this year.

Although pure electric vehicle sales are lagging behind those of hybrid sales, it is important to remember that the technologies used in these vehicles are still relatively new, and with time are likely to advance very quickly as demand and interest in these vehicles grow. Because of this projected increase in demand and technology, a licensed electrician such as The Electric Connection expects to install many electric vehicle charging ports over the next few years. It is very common for a Los Angeles electrician to install easy to use charging stations right in your own garage.

In addition to Toyota’s new plug-in version of the Prius which can be charged with the assistance of a charging port installed by an electrician in Los Angeles, Chevrolet has introduced the Volt, and Ford will be releasing the C-Max Energi hybrid, which will be coming out in late 2012.

For more information on electric vehicle charging and electric vehicle technologies, you can read more at TheElectricConnection.com