Adequate surge protection does not begin and end with point-of-use power strips. Multiple layers of protection are necessary to safeguard your sensitive appliances and electronic devices. You’ve invested a great deal of money in them - now you need to protect them.

Whole house surge protection, installed between street power lines and your home, or between your meter and breaker box, offer your appliances the protection they need against today’s common but unexpected spikes and surges. Diverting excess power to ground, these devices protect both your electronics and your wallet from the dangers of spikes and surges that could leave you with smoking gear and a hefty replacement bill.

Because a whole house surge protector cannot handle 100 percent of surges, you need backup. That’s where point-of-use surge protection devices with power conditioners come in. Installed at individual outlets in your home, these devices also shed excess voltage through ground in the event a spike or surge overcomes your whole house surge protector. They also have the added benefit of noise filtering. There are two types: less expensive models that are destroyed internally – but preserve your gear – in the event of a surge, and more expensive models that can handle all but the most extreme surges without destruction.

Have you ever been watching TV or listening to the radio when someone in an adjacent room operates a blender or vacuum? Oftentimes the result will be static on your TV or an annoying buzz emitting from speakers courtesy of “noise” transmitted through the electrical lines in your home. That’s where a power conditioner comes in.

Those cheap $20 power strips from your local retail store are not the same as a surge protector with a power conditioner. While cheaper, this is definitely an instance where you get what you pay for - a couple extra outlets and some minor surge protection. In the event of a major event, however, they can fail your appliances and sometimes catch fire. Premium, point-of-use surge protection with power conditioning not only adequately protects your appliances from surges, but also:

Protect your gear and run at peak performance with help from the perfect team. Have surge protection and power conditioning equipment installed in your home with the help of Mr. Electric® today.

The secret of creating a great home entertainment system is designing a layout that fits into your home while keeping hidden as much of the understructure (i.e. the wiring) as possible. To achieve this, some homeowners hire professional electricians to send wires through the walls and ceiling. But people often take on the work as a do-it-yourself hobby. Although this is a much better DIY project than, say, attempting to install a furnace or an air conditioning system on your own (you should never try either), it can sometimes lead to wiring issues that are difficult to diagnose and fix. When problems crop up, it’s best to call in an electrician with knowledge of home entertainment systems to assist you.

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Have you considered the thought your house may be in need of a checkup? We visit doctors to make sure we are in good health even if we don’t have any major symptoms. Your house should be afforded the same privilege to make sure it is in good health and does not pose any safety hazards to you and your family. There are things that could be lurking behind the walls that we would never suspect. Electrical problems are often a hidden danger that many homeowners are not aware of until it is too late. A Burbank electrician, like those at The Electric Connection, can give your home a checkup and look for any underlying problems. Taking care of problems before they become serious is always the best prevention of home fires.

An electric safety inspection is one way for an electrician to check out the wiring in the home. If the home is older, the wiring will be evaluated to determine whether or not it is safe or if it needs an upgrade. This is typically only something that is needed if the home is more than 50 years old. Along with the condition of the wiring, the electric panel will also be inspected by the electrician. Burbank homeowners may need to have a breaker replaced or added depending on the needs of people living in the home.

Another facet of an electric safety inspection is to check out the outlets in the home. Any outlets that are not working or have black streaks around the outer casing typically need to be replaced. Loose wires to the outlet can cause an electrical fire and should be taken care of as soon as possible. If you would like to give your home a checkup, give The Electric Connection a call today and schedule your appointment.

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.