“Truth will ultimately prevail where there is pains taken to bring it to light.”—George Washington

Just in time for President’s Day, exclusive designs from Maxim Lighting and ET2 bring the truth to light with innovative illumination backed by 40 years of quality craftsmanship and service.  Whether you are searching for subdued elegance for the dining room and powder room or plentiful task illumination for the kitchen and office, look to Maxim  lighting fixtures for pure and trustworthy constitution.

Capitol Lighting is proud to present the finest in home lighting and accessories with promotional values on the latest from Maxim Lighting and ET2, including:

Enjoy holiday savings on all Maxim lighting fixtures and ET2 in honor of President’s Day, and take 10% off all kitchen pendants too!

It is important you not only feel safe in your home, but are actually relatively safe from most things. We know there are always hidden dangers around us. We can be ready to deal with these things and there are a few little things we can do around the house to help alert us to those safety issues. An electrician in Glendale has some safety tips that will make your home safer and make you feel a little more comfortable and safe when you and your family are home or away. The team at The Electric Connection can help you get these safety measures taken care of.

GFCI Outlets

These outlets can prevent electric shock. They are designed to shut off the instant the circuit is interrupted. These outlets are generally placed in bathrooms and kitchen areas. If an appliance comes into contact with water while plugged in, the outlet trips, cutting the current and preventing shock.

Electric Panel Inspection

It doesn’t hurt to have a Glendale electrician take a look at your electric panel. It may not look like much to you, but to the trained eye of an electrician, it can say a lot. You will learn about the condition of your breakers, the panel itself and the wiring that powers your home. If you have been having trouble with tripping breakers, this inspection will help you learn why.

Carbon Monoxide Detectors

All homes should have at least one carbon monoxide detector installed explains an electrician. Glendale homeowners can install the detectors themselves. They are usually battery-powered and can be placed in the home to alert you to carbon monoxide levels that are too high.

Smoke Detectors

You probably already have a couple of these in your home, but it doesn’t hurt to have a couple hard-wired smoke detectors installed as well. You can never be too safe.

Give The Electric connection a call today and schedule your safety upgrades.

If you have been thinking about getting a specific job done around your house, but have always hesitated because you don’t know how much it costs, we can help. As with any job you need to hire somebody else to complete, you want to have an idea of what it is going to cost. So how do you get an electrical estimate from an electrician? Glendale homeowners can call The Electric Connection and talk with a member of our team. Although it is virtually impossible to give an exact quote, especially over the phone, it is possible to give a pretty good estimate if you know exactly what it is you need like a fixture installed or an outlet replaced.

If you need an estimate about a problem you are having in the house, but are not entirely sure what that particular problem is, things change a bit. An electrician will need to do some testing and diagnosing before an estimate can be given. The time it takes to do this can vary depending on the situation. However, the electrician should give you the fee for hourly rates and explain material costs. Although it is impossible to give exact estimates, an electrician can certainly give you an idea of the problem once found and the cost to fix it.

If you know you need a bigger job, like an electrical panel upgrade, this is something you will want to get an estimate for beforehand. This protects you from getting an astronomical bill after a job is completed that catches you off guard. Always talk with the electrician. Glendale residents will want to make sure they are only hiring a certified, competent electrician to complete any electrical jobs. The Electric Connection has licensed and bonded electricians and would love to help you get your next electrical job completed. Give us a call today.

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.