The electrical infrastructure that is the backbone to power our electrical devices is a manmade marvel. The ability to provide power to cities and towns all over the country is a benefit that we can all enjoy. Power lines are a basic component to provide electrical current throughout cities, neighbourhoods and ultimately our homes. These high-powered lines are packed with strong current and can be highly dangerous if not respected. It is critical that we exercise caution when working around electrical power lines. We have assembled some tips to bear in mind.

Depending on the location of power lines around your home and property, you may encounter situations where you must work nearby electrical lines. Often trimming hedges or trees will bring us within a short distance of live wires or poles.

Standing on ladders, can put you into harms way. Power lines carry a high capacity of electrical current that flows through the wires themselves. By placing yourself closer to high power lines, you may be at risk of causing an electrical arc. If your hedge clippers or ladder comes too close to power lines, the electrical current may jump to the metal ladder, or electrical device. These objects act as a conductor for the electricity to travel to the ground. The result of this could easily be an electrical shock or burn to your body. When performing jobs near power lines, always look up and be conscious of your proximity to the lines. You should always remain at least three meters or 10 feet away from power lines.

If you are trimming a tree, take extreme caution that your falling debris does not come into contact with the power line. A falling branch could cause a spark or stress on the lines that may result in an electrical fire.

During periods of heavy wind, trees may bend and break under the stress of the wind. Should a tree or large branch break and fall, it may pull down and disconnect a power line from an adjacent pole. Should a power pole fail due to a car accident at the base of the pole, this may also cause power lines to break and fall. During any of these events, take extreme caution and remain at least 33 feet or 10 meters away from a downed power line (The equivalent of one school bus in length). The line is likely still active and charged. If you come across a downed power line ensure that nobody moves near the power line and call 911 immediately. Quick actions can prevent serious loss of life.

As much as we love electrical use in our daily lives, it can be very dangerous. If you have questions or concerns with power lines in your neighbourhood you can contact BC Hydro. For assistance with your home electrical, surge protection or service panel upgrades use a licence electrician. Contact your local Expert Electric at 604-681-8338.

The relationship between weather and energy usage is a never-ending cycle. Spikes and drops in temperature and humidity lead to spikes and drops in energy use (and costs), which in turn correspond with spikes and drops in greenhouse gas emissions, further affecting climate. What does this relationship mean when it comes to your energy usage?

Temperatures above 100 and below 40 stress your heating and cooling system, pushing it to capacity, reducing efficiency, and draining energy supplies, along with your wallet. Quite simply, this amounts to less bang for your buck in terms of comfort. Add to temperature issues, wind, cloud cover, and precipitation and the snowball effect continues, further impacting comfort levels, not to mention your ability to illuminate interior spaces. Compound the issues – and the population affected – and you’ve got grid strain to boot.

That depends on the source of energy. In the US, 83 percent of energy usage comes from fossil fuels, which release gases such as CO2 into the environment during the creation of energy. Unfortunately, these gases trap heat in the atmosphere. Atmospheric greenhouse gases have increased 30 percent since the pre-Industrial Revolution era alone, and the level continues to rise with energy demand. As levels increase, so does the effect on the environment. Thousands of scientists agree the trapped gases are currently affecting the climate, and will increasingly weigh on it as time goes on. This has resulted in an increase in interest in cleaner forms of energy, including nuclear, solar, wind, and geothermal.

As a California homeowner, you know that this is not the best time to put your house on the market, which may be why so many people are opting to upgrade their existing homes instead of seeking a replacement. One of the improvements you should consider is an electrical make over.

Electrical wiring can suffer wear and tear, and older homes were simply not built to meet today’s electrical needs, but these deficiencies can be overcome by hiring an experienced electrician. Santa Monica, CA building codes have changed over the years as well, and companies like The Electric Connection that specialize in rewiring older homes can bring your house into compliance with the latest regulations.

If your home was built during the 1960s and 1970s, you may be living in a fire trap. During that time approximately 2 million homes were built or remodeled using aluminum wiring before it was discovered that this type of wiring poses a significant fire hazard. The problem occurs at the electrical connection points where the wiring is spliced to connect to a switch, outlet or circuit breaker. Aluminum expands and shrinks in response to temperature changes, a process which can cause breaks and frays over time. The US Consumer Product and Safety Commission (CPSC) has expressed grave concern over this issue stating that homes with aluminum wiring are up to 50 times more likely to have a fire than homes with copper wiring.

How will you know if you need to have all of the electrical wiring in your house replaced? Fortunately, you may not necessary need a complete rewire in your home or business. A licensed electrician in Santa Monica can evaluate this for you, and tell you to what extent you’ll need to go in order to make your home safe. The Electric Connection, which specializes in house rewires explains that depending on the situation, there might be a fairly inexpensive solution. For example, you may simply need to replace the connection points in your home or business with copper electrical connectors. Not every Santa Monica electrician is trained in this type of retrofit, so you when you’re searching for electrician Santa Monica, it’s important to find a highly trained and fully licensed electrician to perform aluminum-to-copper retrofits.

Older homes, those built prior to 1950, may have a different electrical safety issue. During this time many homes used cloth insulated wiring, something which can appear similar to the insulated wiring used today. The danger builds over time; as the cloth ages it dries and can begin to flake off. Once portions of the wire are exposed, they pose a serious shock and fire danger.

Another challenge presented in older homes or buildings with cloth insulated wiring is that this wiring was frequently not grounded. At the time there were a limited number of electrical appliances and no home computers, so grounding was not considered a serious issue. Today all new homes are grounded so that excess electrical charges caused by electric surges are routed out of the house and into the ground, protecting electronic devices, computers and appliances. An electrician from Santa Monica can replace cloth insulated wiring with a grounded system, making your home and belongings safe from electrical fire and damage caused by power surges.

Another problem with older homes is the lack of three-prong outlets, something that is necessary for most modern appliances. Many homeowners mistakenly think they can simply purchase the three-prong version at the hardware store and swap out their existing two-prong outlets, but doing so can create additional fire risks. Properly swapping out these outlets requires some rewiring so that the three-prong version is grounded. Your Santa Monica electrician can do these quickly and inexpensively for you, and can make certain that any existing three-prong versions have been installed properly.

So how do you determine what type of electrical wiring is in your Santa Monica CA home? The first step is to check the build date. If your home was built before 1950, you can call the Electric Connection for a free electrical estimate by a licensed Santa Monica Electrician. They will be able to quickly evaluate any electrical safety issues that you might have in your home or business electrical system.

Electricity may either be connected by 230 or 240 volts (these are called single phase circuits that are installed in most residential applications), or 400 & 415 Volts (3-phase). The latter are typically best-suited to provide power to heavy-duty appliances and equipment and in industrial settings as well as larger commercial applications.

Some people have electric kilns installed in their homes or garages because they indulge in making pottery or ceramics products. Certain homes have very elaborate and large, ducted air-conditioning systems. In all these situations, a 3-phase circuit would be required to support this heavy power usage.

The type of circuit used is dependent in the equipment or appliances installed on your property. It is important that you check the power & voltage requirements of the installations properly, before deciding what type of circuits you need. In most instances, even massive ovens and high energy-consuming heaters are typically singe-phase.

This current in amps has to be multiplied by the voltage to give you the power in watts. If a 3-phase supply is available, the total voltage of 24,000 watts will be divided by 3; this means 8000 watts will be used in each phase. This means the current in each phase is lower than 1/3rd of what it generally is in a single phase power supply (about 30 amps in each phase instead of 100).

The aspect to keep in view here is that if you have a 3-phase electrical connection, you will end up paying higher connection fees for it. In addition, you would have to pay fixed annual charges for 3-phase as well, so you shouldn’t be considering it for your new home unless it’s really needed.

Depending on the locality you live in, your property may also be connected to a SWER electrical line and many country areas have them. The SWER (single wire, earth return) delivers single-phase power. It is a very economical way of power distribution since it requires only a single transmission or active line. The earth is used as the return conductor and there is no neutral line.

In case you need to use any 3-phase motors in these settings, you would have to get a single-phase to 3-phase converter installed. Choosing the right phase is crucial to the optimal working of your equipment and for the safety of your property as well.