one very recently, with harmful consequences as a result. Power loss is a very real risk when it comes to these strong storms, too. Perhaps you’re thinking “a couple hours won’t make a huge difference, we’ll be fine!” However, the thing about power outages and blackouts is that they are unpredictable, and may last days rather than hours.

A portable backup generator is great for many purposes—a camping trip, to be used in a small studio apartment, or for use in a home that you’re renting and do not have permission to install a whole-house system. Outside of these events though, you simply aren’t going to have an efficient means of power backup without a whole-house generator. Portable systems don’t last as long and are not as effective as their whole-house counterparts.

It is important to remember that in addition to having your whole-house generator professionally installed and repaired, that taking care of it requires a professional as well. This is the only way to ensure that you get the most out of your system and that it’s ready for anything winter may bring. You may think that because your generator is rarely in use, it’s okay to skip maintenance—but this is exactly opposite from the truth.

The United States has three main power grids: The Eastern and Western Interconnection, which each service multiple states, and Texas, which gets an independent power grid. The Electric Reliability Council of Texas, or ERCOT, handles 85 percent of the state’s power needs, producing and distributing electricity to 23 million people.

But, why does Texas need its own grid?

Slate reports that during World War II, Texas was home to many factories required for critical supplies. The electrical planners didn’t want to depend on energy coming in from other states, so they used the abundant natural resources to set up a grid specifically for Texas. Even today, this state requires a massive amount of electricity to keep the industrial sector powered, so it makes sense to have a dedicated grid.

Texas has a strong culture of self-sufficiency, which had an influence on the development of its own energy grid. It does have links to the other interconnections, which get used during particularly high demand periods. Unusually hot summers or long heat waves can sometimes lead to Texas importing energy, so the air conditioners keep going strong.

The utility companies governed by the ERCOT typically do not sell energy outside state lines. This configuration allows Texas to set most of its own rules and regulations, as opposed to the Federal Energy Regulatory Commission setting oversight in place. State regulators can make decisions that make the most sense for their residents, rather than making adjustments based on the needs of multiple states.

Texas has the space and natural resources needed to produce inexpensive electricity for residents and businesses. These costs fall below the national average. Renewable energy sources, such as wind-powered electricity, are moving Texas to more environmentally friendly options.

However, inexpensive energy does have a downside. Population growth in Austin is significant, thanks to startups, tech companies and other businesses moving into the area. Google Fiber also plays a role in bringing in more people. The energy grid needs to adapt to the rising amount of individuals who call Texas home, but electricity companies have less of an incentive to build in Texas compared to states with higher energy costs.

Contact Bryant Electric Service to make sure you’re getting the most out of the Texas Power grid and take back your energy today!

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

The smart grid can be thought of as national and personal all at once. On a personal level, the smart grid connects all of the electronics in your house, letting them communicate on an internet for electronics. This electronic internet also communicates with you via your smart phone or computer in real time, letting you monitor your electricity usage.

Your appliances will talk to each other and organize times of non-peak electrical usage for them to complete cycles that use a lot of energy. Your home will talk to you, letting you know if you’ve left your television running or if the light in the garage is still on.

On a national level, your home will be tied into the national grid like it is already, but two-way communication will happen with the power plant. If your home has solar panels installed by an electrician, any extra energy you produce will be sold to the power plant. The power company will be able to monitor your electrical usage too. They will use this information to create a picture of your neighborhood. This tells them exactly how much energy needs to be sent in your direction.

This system will be a replacement for our current power grid, and it will allow two-way communication between the power plant and your home. The meters for this system will report themselves. You won’t need a stranger tromping through your yard once a month to read your meter anymore.

This system will create a more efficient use of electricity by sending it where it needs to be. It will also report problems as soon as they happen. Before you could find a flashlight during a blackout, the power company will know exactly what wire went down and why. This will cut repair times. Since everything will operate more efficiently, there will be less cost to keep everything operating, which will translate into cheaper power prices for you.

Maintenance for your home will be easier. Having an electrician wire your house for this system will let you know exactly what your home is doing. If your water heater sees problems that could indicate a breakdown, you will get a text message alert. This will let you drain it before it turns your basement into a hot tub.

While you will need to replace your current electronics with applicances designed for this new grid, the cost will be worth it. The power grid will be more reliable, which means fewer blackouts. Your house can even report suspicious electrical activity to you, creating increased security. You may find yourself pressured to have an electrician install solar panels, but the power company will pay you for the extra energy. It will be an improvement for everyone involved.