This Valentine’s day, show your partner how deep your love runs for him or her by cleaning all the neglected kitchen appliances! Chocolates, flowers, and jewelry are nice too, don’t get us wrong. It’s just that serious cleaning says a lot about how much a person cares. By tackling these uncharted territories, not only will the love your partner has for you grow, you may even rekindle the love you once had for your home. That’s a whole lot of love going around.

Can you remember the last time you cleaned the inside of your refrigerator or behind it? It isn’t the easy appliance to maneuver around, so it’s likely that you haven’t cleaned behind it since you moved in. To clean your refrigerator, first pull it out so that you can mop up the dirt, debris, and gunk that’s been left behind. Then, vacuum the coils, which are located either behind or beneath your refrigerator.

All refrigerators are equipped with door gaskets to prevent cold air from escaping. If you have loose gaskets, read through your owner’s manual to find out the replacement part numbers. Your local hardware store should have gaskets in stock.

Make the outside of your fridge sparkle with a solution of equal parts water and white vinegar. If you have a stainless steel fridge, rub in the direction using either a paper towel or a soft wash cloth.

Now that the outside of your fridge looks brand new, it’s time to tackle the other not-so fun part, which is the inside. Clean all shelves and crispers. Perhaps you can use this time to throw away all your expired foods and beverages that you forgot existed.

Even if you have the luxury of owning a self-cleaning oven, some work is still required on your part. Using a solution of equal parts water and vinegar, wipe down the door hinges and frames. You can tackle the particularly rough spots with a some baking soda and a sponge.

How to Clean Your Stovetop:

Soak your burners with hot, soapy water for a few hours, and then scrub. The drop plate may be the dirtiest component of your stove. Before your scrub this area, use a vacuum to get out all the accumulated gunk.

To loosen up all the baked-on foods in your microwave, fill a microwave-safe container with water and heat it until it boils. Wait a few minutes before opening the door so that the steam can do its job; then wipe.

We know how counter-intuitive this sounds, but trust us – it’s a task that needs to be done! Your dishwasher works day in and day out to clean your dishes; it’s only a matter of time before all the gunk accumulates.

If your planning to cook dinner for your partner this Valentine’s Day, he or she will notice how sparkling-clean the plates are!

If you work in hazardous locations and conditions, you would understand the need to promote safety and ensure that the risk of explosions is reduced. It is crucial that you eliminate one or more component of the ignition triangle to minimize the chances of an explosion. The 3 protection methods listed below are widely used in hazardous locations, in the process control industry:

Before we delve a little deeper and understand these techniques, let’s take a quick look at the role electrical enclosures.

Electrical enclosures are cabinets containing different electrical components such as switches, sockets, plugs, knobs, transformers and controls. These keep the surroundings safe from any kind of electrical hazard. Such enclosures are resistant to spark and shock and they have a high tolerance to extreme temperatures. They must be used in hazardous locations as they keep an interior explosion from spreading to the external environment and damaging life and property. Let’s see how they are relevant in the Containment method of protection:

Every year, we see dozens of do-it-yourself jobs go horribly wrong. While our trained and certified electricians can fix the issue, the property owner who tried (and failed) to do the job in the first place probably made it worse. Even if that supposedly simple job sounds easy and you find yourself reasonably handy, you should never attempt to do it yourself. Here are three reasons why you should always hire a professional.

The first and perhaps most serious risk associated with DIY work is injury. Electricity is no joking matter—it’s a powerful force with the ability to change your life in a sheer instant. The current that’s flowing through your walls has the ability to seriously injure you in a split second, and could even kill you in serious situations. You should never take working with electricity lightly, and you shouldn’t even attempt to work with it unless you’ve had extensive training and know how to do so properly.

We hear of too many people who are injured while trying to work with electricity and they fail to notice a hazard or are unaware of a potential problem. Our technicians have all been trained through years of education, practical application, and apprenticeship in order to become a certified electrician. We know how to properly handle electricity and can do so with minimal injury risk.

Are you trying to install a new appliance you just purchased? What about something larger, such as installing a ceiling fan or changing over to recessed lighting? These are all things you should trust to a professional. Not only can a professional do so quickly and cleanly to avoid the mess often caused by a lack of experience, but you can avoid potentially damaging your new purchase as well.

Lack of experience frequently can melt the wires or overload circuits through improper installation, which can ruin your brand new device, and may even void the warranty on it in some situations. If you want your new home appliance installed correctly, trust a professional to do it right the first time.

Hundreds of fires are started by faults in electrical systems every year, such as shoddy connections, low-gauge wire choice, or even loose wires left dangling. These are not only against code, but extremely dangerous and could spark at any moment. Sparks cause fire, which will damage your home considerably. A professional Marietta electrician is well-versed in the ever-changing electrical code rulebook and can do the job you need while adhering to these rules and minimizing your fire risk.

Home automation is the latest trend in electrical installations; it allows you the functionality to control various devices in your home, via a mobile device from any location (in your city or even from across the world). It’s true that the term home automation could be used for various programmable devices such as sprinkler systems and thermostats.

However, home automation is much more than that, and it encompasses a number of things in a home including:

All of these are connected to a network that can be remotely controlled. From the perspective of home security, this includes fixtures such as the alarm system in your home, as well as the windows, doors, smoke detectors, locks, the CCTV cameras as well as the other sensors that are connected to it.

Even up until the recent past, it was only commercial systems and high-end homes that had automated centrally-controlled systems. Typically, these included only the heating & cooling systems, lighting systems and they hardly ever provided anything more than just the standard controls, monitoring functions as well as scheduling actions. In addition, these were accessible only from certain control points from within the very same building.

While this was a definite convenience and advantage, home automation takes this concept and technology one step further; and is popularly called the – ‘ Internet of Things’. In this type of system, everything has a specific IP address that can be accessed and monitored remotely.

Smart devices and various smart appliances are the most obvious things that get connected to the LAN via Wi-Fi or Ethernet. However, it’s possible to incorporate electrical outlets and light switches into your home automation network.

In addition to the convenience factor, the energy efficiency factor is what makes home automation such an attractive option. While modern appliances provide convenience and comfort, many of them are also power guzzlers; home automation systems also address this issue. Thermostats help monitor the heating and cooling system in your home; similarly the lighting systems can also be programmed and set for various target temperatures.

This helps keep energy usage at the minimum levels during the times when you aren’t really going to be using them. In fact this scheduling can be broken down at a more micro level to distinguish between the seasons of the year and the weekends etc., in some instances. If required, ‘macros’ can also be programmed into the system and these can be controlled remotely as required.

In fact, you can add settings – like “coming home” etc. that can activate various appliances, equipment and installations at the tap of your smartphone and you can have the opposite set as a “leaving home’ event. This ensures you use only as much energy as required, which adds to the overall energy efficiency of your home.

If you are considering getting smart automation solutions for your home, it’s important that you get experienced and credible electricians to handle the job for you. We at Allround Electricals are a company that has been operating in this space for a number of years and know what it takes to provide our customers with the kind of solutions they need.

For any more information about home automation or simply speak with the experts at our company. You can take our advice on various aspects of electrical and wiring installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263