Prisons and correctional facilities are full of security threats, it’s just common sense.

That is why it’s a major task and a seemingly forever ongoing one to try everything in the book to reduce threats and increase security for everyone in, near, or even outside the facility.

Today we wanted to address how we can solve 2 major correctional lighting system and things you should look out for when finding fixtures perfect for your building and budget.

Firstly, a LED prison lighting system will reduce indirect stress and irritability in both inmates and staff.

Secondly, LEDs within correctional buildings will improve detection of movement, which we all know is crucial.

How you ask? Well, lets talk about each one individually and break it down a bit more than just one sentence. From there, we will talk about how to go about making the conversion over to LED, like we mentioned at the start.

Have you ever been around a light that was flickering and or buzzing? It can get annoying, and fast. Imagine living under these conditions, everyday all day; no break other than a few hours when you go outside. Sounds like no fun, and it can lead to some serious stress and irritability issues for both inmates and staff.

For obvious reasons, additional stress on inmates will never produce a good outcome for anyone. But, another important point is that this can effect your staff and guards too. It can affect their ability to perform at full capacity, which in combination with highly irritable inmates is not a good mix whatsoever.

With LED technology, they will never be susceptible to flickering nor buzzing. Not even near the end of the lights lifespan will they flicker or buzz, unlike other technologies commonly still used in such facilities. Thus, you can avoid any stress or irritability which may be caused from flickering / buzzing lights.

If you can’t tell where everyone is at every second, you’ve got an issue. This is especially important for outdoors during the time when it is dark out. Sure, some light is better than none; but why jeopardize your operations with a flickering light when you could upgrade to LED and get rid of the issue entirely?

As you may or may not know, flickering lights make it harder to not only detect movement, but also identify humans. Think of a strobe light, it’s a bit harder to actually make out what is going on entirely. This holds true with a flickering light, even if it isn’t as bad as a strobe light is.

Here we are going to list a couple of the other major general benefits that LED technology offers over other technologies such as metal halide, HPS, fluorescent, and similar.

There are really only two routes you can take, LED retrofit lighting kit will work perfectly. On top of that, retrofitting is a much cheaper option (typically) then a full replacement is. So, if you don’t need to fully replace then stick with retrofit kit LEDs and you will save a lot on your lighting system investment.

Conclusion

Flaws can always be picked at, especially in such tedious and unpredictable environments like the one we are discussing in this topic.

It is no secret power is becoming more expensive. It is a premium service, but it is something we have all come to depend on a great deal. Our lives without power is an unfathomable thought. Our dependency on the power grid is a little scary. Government powers realize we are headed towards disaster if we don’t come up with some other ways of providing the power we need to our homes and businesses. Alternative power is something that has been talked about for decades, but in the last few years it is something that has become increasingly popular with residents all across the country. The team at The Electric Connection understands the need to get on board the renewable energy train and are here to help.

Many homeowners are taking the leap into alternative energy. Having solar panels installed or giving the wind turbines a shot is something almost any homeowner can do. However, they will still need the services of an electrician in Southern California to equip their home with the necessary devices and equipment to harness the energy from the sun or wind. From there, the energy will be transformed to electricity for the home. This will require some additional wiring and what not that must be completed by a certified electrician.

There is certainly going to be an initial investment when you make the switch, but the savings in the months to years to come is going to offset the cost. You will also have the peace of mind knowing you have a backup power source and are not completely reliant on the main power grid. The fact you are doing something good for the environment is also a big bonus. If you are taking the initiative and adding alternative power to your home, give The Electric Connection a call today and schedule your installation appointment.

If you are working with electricity, it is important to know how to safely install an organized electric wiring layout.  Fires and accidents can be caused by faulty electric wiring layouts, so it’s important to be able to recognize potential hazards and avoid them whenever possible.

Although this job may be The electric wiring layout for your home will vary according to what room you are doing the wiring for. In any case, it’s a good idea to draw a diagram of the layout first. The diagram will help you determine what lighting or appliances are needed, where they will be located and what sort of outlets will be necessary for each item.

Next you should determine which tools and Because it is so important to have your electric wiring layout installed safely, here are a few tips you should be aware of during the installation process:

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!