Winter is in full swing in Australia, which also means you’re likely spending much more time in your hot tub. If you don’t currently have a hot tub, and are considering getting one installed in the near future, there are certain aspects to consider before buying one.

We all are aware that water and electricity just don’t mix; and so, sticking to the appropriate electrical and safety protocol with hot tub installations and their maintenance is something you can’t afford to overlook. Here are a few hot tub electrical requirements and safety tips to follow:

Even if you are a DIY enthusiast, installing a new hot tub is a completely different animal. Wiring of hot tubs isn’t an easy task and is distinctly more complicated and involved than setting up some other standard home appliances. Consulting an experienced and licensed local electrician will often save you a significant amount of time, money, trouble or even a trip to a hospital.

An electrician will make sure the electrical wiring and fixtures required for the hot tub are installed well and that helps avoid costly mistakes like ones that can occur in skilled and licensed electrician will make sure that the installation and wiring is in line with the existing codes.

Before installing your hot tub, it’s vital to consider its location. Not only will you need room for the actual hot tub but extra room to get into and out of it. The feature should be at least 10′ away from any type of overhead power lines and a minimum of 5′ away from removed spa panels. It’s also necessary to consider how the hot tub will connect to the power source.

Electrical fires can be extremely destructive and uncontainable, once they break out. An electrical fault and severe sparking in the electrical installations in one part of your property can easily spread to the other areas very quickly. This means the destruction caused can be extremely high and the fire can pose a threat to the people living or working on your property as well.

When you get the electrical system on your property installed by credible professionals, you can rest assured that there will be no problems and that they will be quite safe. However, if you live on an older property that also has old wiring, it can deteriorate or get damaged over time, and can prove to be extremely dangerous. This is why you should make it a point to conduct routine checks on all the electrical installations in your home.

Most electrical companies also design preventive electrical maintenance contracts based on your specific needs; they will visit your property at pre-decided intervals and conduct thorough checks on all the electrical fittings and installations. This helps identify potential & existing problems beforehand and these can be fixed before they pose a major hazard.

Aside from this, it’s also important that you be wary and conduct some basic checks on all the electrical installations. Here are some signs you should look out for:

If you find that a particular circuit breaker trips once in a while, it may just be an indication that you have plugged in too many electrical appliances and devices all at once into that particular circuit. However, if you find yourself resetting the circuit breaker too often, it’s crucial that you don’t ignore it.

The circuit breaker is built specifically to alert you when something is wrong with the system; this is why you should call in a skilled electrician and get it checked without delay. The constant tripping could be an indication of a much bigger problem.

If you hear buzzing sounds or notice sparking in an electrical outlet or if you detect a burning odour emanating from the outlets, that’s a very strong warning that something’s wrong with it, and that it needs to be replaced as soon as possible. Not only will the electrician check the outlet, but will also check and update the wiring connected to it.

If you experience an electrical shock while operating any appliance or device in your home, it’s an indication that there is electrical current leaking at some point. This could be caused by faulty wiring or even a grounding fault. The electrician will use special testing devices to see where the problem lies and will fix it quickly and efficiently.

Sometimes a light bulb might flicker because it hasn’t been fitted correctly in its socket. However, there are times when this problem is caused due to a loose circuit or loose wiring. It’s the same with other electrical outlets that don’t function as they should.

The Importance of Residential Circuit Breakers Circuit breakers have an important job in the day to day functioning of your home’s electrical system. These breakers are attached or connected to an electrical circuit. They are designed to prevent any further power flow continuing through the circuit in case there is an arc, short or a power surge. Circuit breakers can fail or go bad, and in such cases, they require immediate attention. Because if a circuit breaker is no longer functioning, it cannot provide your appliances and electrical system the protection they need.

Where are Circuit Breakers? Circuit breakers are located in the circuit breaker box. Some homes have a single main breaker box while other homes may have one main breaker box plus several small breaker boxes. It is important to know where your home’s circuit breakers are located so you can check them in the event of an emergency, or if a breaker gets tripped and needs to be reset.

Finding a Bad Breaker If a circuit breaker gets tripped, you need to reset it. A tripped breaker appears to be halfway between the on and off position. A circuit breaker may not need to be replaced, it may just need to be reset. Turn off all the lights and electrical appliances operating on that particular circuit. Flip the breaker back to the “on” position.

Some circuit breakers have to be turned completely off before they are turned back on. Test the circuit breaker after it has been reset by turning the breaker back on and then adding all of the devices or appliances back one at a time. If every item operates again, a voltage tester is not necessary.