You may hear the terms electrician and electrical maintenance technician and think they are the exact same position. While they do complete many of the same tasks, there is a difference. When you are searching for the best electrician Burbank has to offer, you want to understand this difference so you can make the right decision. Learn more about how an electrician and electrical maintenance technician position varies and you will be ready to make the right hire for your electrical project.

Job Differences

An electrician in Burbank is who you would call to install wiring, make electrical repairs and deal with power systems in residential and commercial properties. These experts understand wiring blueprints and can also help connect circuit breakers and transformers. An electrical maintenance technician also works with electricity, but in less complex forms. For instance one of these technicians may handle preventative maintenance, troubleshooting and repair simple switches.

Education

An electrician must complete an apprenticeship program that offers both classroom courses and extensive on the job training. He or she must also obtain proper licensing from the state or county, ensuring that all proper procedures are followed. In many cases an electrical maintenance technician will learn skills with a certification course or on the job training.

Pay and Growth

Those with electrical skills are lucky to have a bright future. Both positions are expected to grow at a rapid rate, according to Bureau of Labor Statistics data. This same data does show the salary difference between the two positions. An electrical maintenance technician, on average, earns nearly $15,000 less per year than a licensed electrician does.

As you can see, there is a difference between the two positions. If you want a licensed and experienced electrician to tackle your electrical projects, call Electric Connection today and let one of our experts come complete your electrical project today.

The power goes off and on at random times and often when you least expect it. When it happens, it is a minor nuisance that requires you to reset clocks and turn back on whatever appliance you are using. You don’t typically think of that few seconds of the power going off and then going right back on as serious. It is. Those little power outages are killing the life of your appliances and damaging your sensitive electronics. Every time the power flickers or surges, anything that is plugged in is basically getting a jolt. An electrician in Los Angeles wants you to save your electronics and appliances by investing surge protection. The team at The Electric Connection can get your home protected in just a few short hours.

Every day, little surges of electricity are sent through the lines and into your home. You may hear your refrigerator compressor kick on when nobody has left the door open or your lights may get suddenly brighter or dim. These are all signs of a power surge explains an electrician. Los Angeles homeowners may notice these things happen if they run more than a couple appliances at a time or when something like the AC unit kicks on. The electricity is pulled from the other appliances and electronics to run the AC, which is a lot like cutting off the supply. This makes everything else, including the AC, work a little harder and not run quite as it should. This is what causes the damage.

The fix is to have a whole house surge protector installed at the electric panel by a Los Angeles electrician. This will control the electrical flow and prevent those surges from happening. If the power goes out and comes right back on, the surge protector will prevent any one appliance from getting a jolt of electricity that may fry the board. Give The Electric Connection a call today and schedule your surge protection installation.

If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

We’re excited to announce the addition of six new off-road LED light bars to our SBL series product line. The 12″, 30″, 50″ light bars are equipped with two rows of powerful LEDs that emit anywhere from 1,100 to 10,000 lumens depending on the length of the bar.  These heavy-duty light bars can be used for many applications, including off-road driving lights, daytime running lights, or fog lights on trucks, ATVs, or UTVs as well as for work lighting, industrial lighting, marine lighting, and tractor lighting.

LEDs in these light bars emit either a wide flood beam or a combination spot/flood beam pattern for focusing on long- and short-range distances simultaneously.