You may not have thought about the Advantages To Wind Energy lately, but every month when you get your electric bill in the mail, you may find yourself asking, “Isn’t there a better way?”, or “How can I have lower electric bills?”  As energy costs rise, and the environmental impact of using fossil fuels to generate electricity comes into question, green energy production is becoming an increasingly valuable way to help your home or business do its part in helping the environment, and lowering those high energy costs that drain your funds each and every month.  In an effort to find newer, more sustainable forms of energy, a great opportunity has arisen in harnessing the abundant power of the wind to create electricity yourself, and lower its overall cost.

While many people are familiar with the giant wind farms scattered throughout the plains across the state of Texas, most people aren’t aware that this isn’t the only way to use wind for electricity. Local Dallas and Plano Electrician, ElectricMan Inc. is now offering something that will definitely spark your interest!

The Advantages To Wind Energy can now be felt by homeowners and business owners through more efficient, highly cost effective, and easily installed wind power generators.  Standing only five feet tall, with the capability of harnessing even a slight breeze coming from any direction, these new wind generators are a drastic improvement on the standard “Propeller Style” wind power generators that most people are familiar with.  Now you don’t need an open field or even a very windy area in order to start declaring your independence from the high costs that electric companies place on the electricity that they provide to you.

Partnered with a system like the Indoor Generator, which allows you to program the system to use stored electricity when it is most efficient for you, you can do two major things.  First, at times when you are creating more energy than you need, that energy can be funneled into a battery system and stored for your higher usage time, avoiding those peak usage premiums that power companies have put in place to raise profits and revenue. Secondly, once your stored supply of electricity is at full capacity, you can actually sell your surplus electricity back to the power company, offering you the possibility of income without any labor on your part!

Everyone is looking for a way to save money these days, so here is one more incredible Advantage To Wind Energy.  If you install a renewable energy system for your home or business before the end of 2016, your entire system is eligible for a 30% federal tax credit!

To see this amazing product in action, visit www.breezewaypower.com, or to purchase this product locally and learn more about the Advantages To Wind Energy, call your local Dallas and Plano Electrician, ElectricMan Inc. at 972-792-7270 or visit our website at www.electricmaninc.com!

Holiday lighting products have evolved into a much safer product over the years.  With the development of properly sized wires and fuses and LED lighting to reduce the consumption load and the heat the lamps produce, holiday lighting has never been more safe.  In the past people would take the old C style lamps and hook one string of lights into the other.  Often overloading one the strings or the weakest link.  This overload would often melt wires, create sparks, and in some cases even cause a fire.  The manufactures and improved safety standards and testing, help reduce to the chance of an overload by installing a fuse at the starter end or male end of the light string.  This fuse would blow or trip when the load became greater than the fuse capacity, which would then project the wire from the overload.  It is always recommended to install lights that are interconnected (one light string plugged into the other) to manufacture specifications as listed by there instructions.

LED or light emitting diodes have not only made holiday lighting more efficient but even safer.  The old style C7 and C9 lamps could reach temperatures of up to 350 degrees.  The hot lamp if rested against wood or dry Christmas tree, has the potential to ignite the material from the heat the lamp produces and cause a fire.  With LED’s to replace the old style incandescent lamps the chance of fire from heat is almost non existing.  However, it is still possible to cause a fire from electrical spark or short.  These sparks or shorts produce heat much greater and can easily ignite flammable material.  Sparks or shorts are often caused by frayed or damaged insulation on the electrical wires and also loose connections.  It is important to inspect your holiday lighting for damaged or loose components and replace when needed.  Be sure not to use any damaged equipment and immediately discard them to eliminate the chance of future use.

A common mistake made people make with holiday lighting is to plug to many holiday lights into each other.  UL listed holiday lighting and cord splitters are tested to specific tolerances and should only be installed to manufactures specifications.  The easiest location to find the manufactures is specifications is to look at the tag on the cord most commonly found near the male end of the cord or light string.

If enough standard wall sockets are not present and you must plug in multiple cords, it is highly recommended to install a plug switch with a built in overload device to reduce the risk of overload.  The built in overload should not be mistaken for a surge protection device.  A surge protector reduces or eliminates the excess voltage going to the device plugged into itself.  Where an overload device will shut off power at the point of installation if to much power is being drawn through it.

On many new homes we will install plug ins located in the soffit or eve to reduce or eliminate drop cords for holiday lighting.  These soffit plugs are installed on a special heavier 20 amp circuit and often include a convenience switch located inside the home to shut the lights on / off as needed.  The special circuit makes sure your holiday lighting is not installed on regular interior circuits so the chance of variable loads and overloads are dramatically reduced.

Permanent holiday lighting can be installed by a licensed electrician.  The most common type of permanent holiday lighting is LED strip lighting.  These are can be installed on the under side of eves or soffits for a permanent installation.  Depending on the type of LED holiday lighting you choose you may even have the option to change the colors of the lights with a push of a button.  This allows the holiday lighting to be used for many occasions throughout the year.  You can call today or schedule online to have a lighting specialist come to your home or business and provide you with a written no obligation quote.

When it comes to residential electrical work, most people just call up an electrician without a second thought. And for good reason – working with electricity can be difficult and dangerous if not done properly. However, there are some simple jobs that amateur electricians can perform on their own if they have basic tools and experience. Read on for tips on how to run electrical wiring behind your walls without tearing up your home.