Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.

If you own or manage apartments or offices, how can you tell whether your Beverly Hills electrician is treating you right? I’ve been providing electrical services to property managers and owners for over 30 years in the Beverly Hills and surrounding areas and have learned a lot about what they really need and want and how to treat them right. There are eight benefits that your electrician should provide you if are a property manager.

1) The electrical contractor should be easy to reach. A live person should always answer the phone during business hours. After hours, there should be an emergency number that you can call.

2) If you have an urgent electrical situation, your electrical company should handle it right away. Let’s say that one of your office buildings loses its exterior lights at 8 p.m. on Sunday night. You want an electrician who can fix it, whether it’s as simple as flipping on a circuit breaker or whether troubleshooting is needed to find where bare wires are touching. The electrical company should be large enough that it can send you experienced and knowledgeable electricians right away to get the lights back on.

3) Your electrician should quote you prices in advance of doing work. If you want something new installed, the electrician should be able to give you a price up front in writing once he’s seen the job. New installations include, for example, a new light fixture, a rewire of an apartment, an electrical panel upgrade, or installing any other new electrical equipment.

If there’s something broken, for example, an electrical outlet that no longer works, he’ll want to charge you per hour for troubleshooting. However, within about an hour, he should either have fixed it or have figured out the problem and be ready to give you a written estimate for fixing it.

4) You should be able to trust that the electrician has the judgment to give you accurate estimates. For example, the doorbell for one of your apartment units has broken. Even though door bells look small and simple, in this case, looks can be deceptive. Hunting for an electrical short or loose wire somewhere in the walls could turn into a larger project. Your electrician should have the judgment to realize this and give you an accurate estimate early on so that you can decide if you want to go ahead.

5) The electrician should act professionally with your tenants. Electricians should have a friendly, professional manner with tenants. They should also have the training to give information to tenants on a need-to-know basis, knowing what to say and what not to. For example, an electrician should start by saying something like, “The management company asked us to come out to get your power back on for you.” The electrician should know not to say, “The wiring in your apartment is scary. I’m going to recommend a rewire to the management before it burns down!”

6) The electrician should make sure that you know when the job is done. When the electrician finishes, he should check that everything works, clean up after himself, and if the tenants are home, let them know that the job is done. He should also tell you.

7) The electrician in Beverly Hills should keep you posted on the condition of the electrical in your units. Let’s say that you asked the electrician to add a circuit for a computer. He adds the circuit, but also notices that a bedroom has no smoke detector. Or the tenants might tell him that at night, when a hair dryer is turned on in the lit bathroom, the circuit breaker trips off. Without saying anything to the tenant that would obligate you to do electrical work, the electrician should give you a heads up.

8 ) The electrical office should provide you with accurate bills. Bills should arrive when expected with the detail needed to provide you with a clear accounting for the property owners. Paperwork should be smooth and simple, just as the electrical work should be smooth and complete. During business hours, an office manager should be available to answer any questions about billing.

If your electrician gets the job done, charges honest and reasonable rates, and offers you these eight benefits, you’ve found a keeper. Keep his contact information at hand and you’ll know who to call the next time you have an electrical problem.

Visit our company profile.