On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

Whenever you have a short circuit, it means that there was an accidental path created in your existing circuit, which generated a connection that was not there before the short occurred. Electricity will always follow the path of least resistance, which means that it will almost always follow this new path, rather than its intended path. This typically results in an abnormally high level of electrical current. The most common type of short is when two bare wires cross, such as when old insulation deteriorates, causing a loose connection which allows two wires to touch.

An electrical short is not something to take lightly. This increased current generates a great amount of heat, which can lead to sparks and fire. One way to identify an electrical short is by hearing a popping sound whenever that particular circuit is turned on. This is the sound of the electricity taking the path along the new connection that it has found, causing the circuit to experience a sudden overload. Smoke, flames and melting fixtures can follow, leading to larger fires and risk of shock in the immediate vicinity.

Another common source of electrical shorts is improper wiring. This can occur if the metal lining of a particular switch or outlet touches one of the wires. An electrician in Burbank must always find and fix shorts caused by damage, such as storm damage.

The most important thing to do whenever you have a short is to address it immediately. Because of the potential severity of this situation, call an electrician right away to have them inspect and fix the problem for you. A short left unrepaired can lead to more extensive damage, resulting in a much higher cost than if you had fixed the problem whenever it was first detected. For more information on electrical troubleshooting and our services, visit our main page (Click Here).