Watch cascading spiral turns and vibrant emanations through a glass curved body bending and zig-zagging in a brilliant display of illumination.  New “convertible” pendant light fixtures from Eurofase Lighting are turning heads and making a grand debut with the introduction of Bloor, Spadina, Finch and Dundas.

All four fixtures may be easily converted from pendants to flush mount fixtures right out of the box! Dazzling lighting designs create a fantastic play of shadow and light as the fixture body diffuses the light, turning straight solid edges into an illuminating serpentine pattern.

“Bloor” features Rippled Hand-blown Clear Press glass with Chrome accents in a robust bell-shaped pendant design.

“Spadina” features Rippled Hand-blown Clear Press glass with handsomely defined swirling scales in a modern-contemporary orb shape.

“Finch” is defined with Rippled Hand-blown Clear Press glass and Chrome accents in a brilliantly scalloped combination of shell-like symmetry.

“Dundas” presents a unison of floral-like blossoms in Rippled Hand-blown Clear Press glass with Chrome accents.

Eurofase Lighting has been powering up the lighting industry with outstanding ceiling pendant lights, wall lighting and chandeliers since 1989.  They are on the cutting-edge of technological advancement with some of the most innovative decorative pendant lights and chandeliers.  See the entire line of pendant lights and ceiling fixtures from Eurofase at 1800lighting.com.

Experience the magic of all new designs from Eurofase Lighting at 1800lighting.com or visit your nearest Capitol Lighting showroom.

If there are two things you should never mix, its water and electricity. Water actually reduces the body’s electrical resistance. This is why you probably know to never get electrical devices wet; such as bring a radio into the shower with you. It is important to keep yourself safe in the room that has the most water in it. Here are some tips when it comes to running electricity through the bathroom.

Sometimes it can be difficult to light the bathroom properly. With minimal windows or frosted windows, the light just doesn’t come in the same. Lighting is even more important in this situation so you have proper sight to avoid any hazards. You may require ample lighting to keep everything in your bathroom visible at all times. Plus, proper lighting can make your bathroom more peaceful and relaxing.

When installing lights in a bathroom it is important to ensure that they are watertight and water proof. When you have a hot bath or a hot shower there can be a significant amount of steam. If this steam gets into the light fixture or electrical connection it can corrode the wires and increase the chance of electrical surges and fires. If you are installing new lights in your bathroom have an expert check the product and connections to ensure that you are safe.

Blow dryers, shavers, curlers – there are many electrical devices that are commonly used in the bathroom so there needs to be an electrical outlet. This can be a huge risk for electrocution if not properly placed. Electrical outlets should be on their own dedicated circuit. In the event that there is a surge or water contact, only that circuit will shut off. The outlet should also have a GFCI (grounded fault circuit interrupter). Without a grounder, electricity can escape from the device and if you are wet, this is the last thing you want. Lastly, the outlet should be near the sink for functionality, but not close enough that any wires can hang into the water.

Our bathrooms can be a place of peace and escape, but you must respect the danger of putting electricity near water. If you are looking to remodel your bathroom call in an Expert Electrician.

Prolong the Vacation with Fanimation!

Fun Fact: Founder and CEO of Fanimation, Tom Frampton, began his career with three ceiling fan designs constructed in his garage in Pasadena, California.  Currently with over 31 innovative fan configurations, including palm leaf blades and a retractable housing, Tom’s designs are featured around the world.

Have a Blast with Versatility and Unique Configurations from fanimation….

50 Blades of Gray and an Astounding List of Controls….

The heat is at it’s peak and so is your air conditioner!  As a licensed Plano electrician, ElectricMan is experiencing high call volume due to over heating of the A/C Breaker.  This is caused by 2 things:  1, is of course the air conditioner running full time to keep up with the demand for cold air, and 2, loose wiring at the air conditioning breaker at your electrical panel.  With a simple maintenance checkup on your electrical panel, you could save yourself LOTS of MONEY!  Many electrical panel replacements and air conditioning unit replacements could be avoided with this simple routine maintenance.  Our licensed and experienced technicians do this maintenance in less than a half an hour and that could keep you from going without power and parting with that hard earned money.  Summers are meant to be enjoyed, live life to its fullest!

ElectricMan

The term “arc flash” is used to describe low impedance connections in an electrical system, which allows movement of unwanted electric discharge through the air from one voltage phase to another, or to ground. This leads to a rapid rise in temperature and pressure in the air between electrical conductors, causing an explosion known as an arc blast.

Arc blasts and the resulting heat can lead to fires, pressure waves and flying shrapnel that result in serious damage to life and property. These explosions typically occur without any warning, destroy electrical equipment completely and lead to severe injury or death of personnel present within the boundary of the arc flash.

What Are the Main Causes of Arc Flash?

Arc flash occurs when several electrical conductors are placed close to each other, with significant fault currents flowing through them. In this situation, ionization of the air can take place as a result of various factors – such as differences in potential – which leads to a low resistance path and allows current to flow through the air gap between conductors.

Many people assume that low voltage equipment is safe from arc flash, but arc flash hazard levels may be higher at low voltages, due to the high fault currents. Most incidents that occur in low voltage systems are caused by human error, e.g. a tool slipping while a technician works on electrical equipment.

Arc flash can also be caused due to: