Summers in Virginia are always filled with community activities and backyard parties. As the days get warmer, more time is spent outdoors and hanging out with close friends and family. Most of these gatherings last well into the nighttime with the desire to stay outside for as long as possible. If you have ever hosted a gathering like this, then you know that most of it is spent in your backyard. If you don’t have the right backyard accessories to host a gathering, check out these tips that can help transform your backyard into a party worthy space!

Lighting

Outdoor lighting is the most important feature for any backyard gathering. It gives a certain aesthetic and helps illuminate your yard so your gathering can last all night. You can grab a few old mason jars that are just lying around and place some tissue paper and battery-operated flameless candles in them for an effortless centerpiece lighting on your tables. Don’t forget to light a few citronella candles throughout your backyard to fight off those pesky mosquitoes.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

Just about everyone is looking for a way to cut down on energy costs and save their business money. Here are some ways to improve the energy efficiency in commercial buildings:

It might seem like common sense, but  most commercial buildings do not need to have their lights and air on at all times. If your building allows, and when it isn’t being used, make sure the energy system is turned off.

As the season changes, so should the temperature of the commercial building. To maintain a comfortable, energy-efficient temperature, set rooms to 75 degrees Fahrenheit in the summer months and 68 degrees Fahrenheit during the winter ones. Adjust rarely used spaces, like bathrooms, to 60 degrees Fahrenheit.

It’s important to remember to change the air filters in a commercial building to save energy. Paying attention to proper filter maintenance will help prevent wasting energy and overworking the equipment.

A room’s temperature, air movement and humidity affect energy efficiency a great deal.   Using fans can help reduce your business’ need to turn up the air conditioner as the fan moves the air around the room.

Not only does turning off the lights in areas that aren’t being used decrease the energy consumption in a building, but replacing incandescent light bulbs with compact fluorescent light globes or even better yet  LED or high efficiency fluorescent lamps can reduce the amount of heat in the room as well as save money.

Occupancy or vacancy sensors can also help reduce the time lights are on.  These sensors adjust accordingly when there is no movement in a room, shutting off the lights.  A full commercial Lighting Control System can keep your business from wasting energy through the monitoring of how light a room actually is and through daylight harvesting.

Being mindful of energy efficiency in commercial businesses means preventing energy waste in any way possible. Investing in energy efficient office electronics and equipment can lessen the amount of heat that’s emitted from these appliances. Turning off the equipment completely can help reduce savings as well.  Also purchasing equipment with features such as “energy saver” can help reduce energy use.

A large amount of heat is lost in the winter and gained in the summer through a building’s windows. In order to reduce this energy inefficiency, a commercial building can double-glaze their windows, or purchase thermal window coverings, if allowed.

As far as a long-term solution is concerned, insulating a commercial building can help lessen the amount of time and energy spent on cooling and heating systems. Insulating ceilings, walls, pipes and roof spaces can be incredibly useful. Energy efficient electricians can help.

The competition is steep and the lighting designs are sensational.  Among the leaders in the race for the most unconventional ceiling light fixture designs of the year, these standouts are exquisitely different and–although they may not fit in with everybody’s interior design scheme–they make for mind-altering artistry that brings the “wow” factor to a select few who are daring enough to shine outside of the box!

TEN:  Attractively AKIMBO

“Akimbo” from Tech Lighting

NINE: Outer bound with ORION

“Orion” from ET2

EIGHT: Unearthing URCHINS

“Urchin” pendant light from Varaluz

SEVEN:  Cultivating CASSINI

“Cassini” from Trend Lighting

SIX: Mixing it up with MIMI

“Mimi” from Maxim Lighting

FIVE: Hoodwinked by HOUDINI

“Houdini” chandelier from Corbett Lighting

FOUR:  Zanny ZIUM

“Zium” from Elán Lighting

THREE: Captivating CATALYST

“Catalyst” from Fine Art Lamps

TWO: Metaphysical MICRO

“Micro” from Eurofase

ONE:  Spellbinding STRANDELIER