Advanced lighting control systems (ALCS) utilize electronic circuits with a programmable logic controller to automatically adjust lighting levels.  Program a number of variables and light requirements to get the lighting just perfect. This helps in providing the right amount of light where and when it is needed, hence improving energy efficiency and savings.

Advanced lighting control systems provide benefits like automatic scheduling and dimming. Turn lights off based on room occupancy and level of daylight. In so doing, the ALCS adjusts the light levels to match the requirements at any particular time. For example, when a room is empty, lights dim or go off completely. This saves on utility costs.

The sensors communicate with the lighting control system through wired or wireless connections. In some applications, sensors are integrated into the lighting control. While the wired network requires hand wiring of all the devices, the wireless communications use radio frequencies. Therefore several benefits exist over the wired network.

Wireless technology eliminates the need for wiring and is, therefore, cheaper, easy to implement and modify. It provides more flexibility while reducing the planning time for the electrical system. Wireless lighting controls are ideal for hard-to-reach lights. These include places where there are non-accessible or hard ceilings, basements, and other expensive or hard-to-wire areas.

The controller automatically adjusts the level of illumination based on one or a combination of the following variables.

The controls utilize room occupancy or proximity sensors to check for activity in the room or target area. If there is no activity, the controls automatically switch off or dim the lights. The system will then turn the lights to full brightness when room occupancy sensors detect someone within a defined space.

Different lighting levels are required based on the activity. In some applications such as warehouses, there is no need to keep all the lights on when areas are not in use. The lighting control systems will either turn off or dim most of the lights. Some advanced systems provide just enough light in the open spaces. Yet, more light becomes available near shelves where a worker might be picking up or replacing items.

Additional light is required during office hours when people are working. However, this isn’t necessary during the lunch break, or when offices are being cleaned. A combination of controls may be used here. Take advantage of daylight, dim or completely turning off the lights when more natural light filters into the room.

The programmable controls can be used to switch individual or groups of lights depending on time of day. These programs run 7 days a week. Consequently, there’s a separate schedule for weekdays, weekends, and holidays. In an office setup, a timer ensures that all lights, apart from security lights, are turned off at night, during the weekends and on holidays.

Instead of using the lamp at its maximum rating when new, the controls dim the light in certain cases. This reduces the normal wear and tear. As the lamp ages, its level of illumination will decrease. However, instead of the light level going down, the control will decrease the dimming level and maintain the required level of light.

So instead of powering the light at 100% and wasting energy with excess light that is not required, the controller ensures light is powered at a lower percentage. This ensures that required light is provided, but at a lower power consumption.

Factors considered when implementing a lighting system include the need for flexibility, facility size, floor plans, facility use, daylight hours, and building codes. Other considerations include the cost-effectiveness of the system, the ease of use, visual performance and comfort.

In addition to controlling the lights, the advanced lighting control systems help in determining the occupancy patterns. Moreover, the operating status of part or whole sections and the entire system’s performance is monitored. This provides business owners with an opportunity to evaluate the effectiveness of the installation and make adjustments.

The easiest way to add lighting to a closet is by installing a simple, battery-powered fixture or hanging a corded fixture plugged into a nearby outlet. However, there are permanent solutions. Calling an electrician Beverly Hills, such as one of the skilled members of the Electric Connection team, is always a great choice when you have electrical projects that need completed. Learn more about what Electrical Connection will do when installing closet lighting in your home.

The electrician will work with you to determine the local building codes for clearance around the fixture then mark the desired location. He or she will then go into the attic and cut the hole necessary for installation. This may require some drywall work to properly mount the fixture.

At this point the electrician will cut off power to that part of the home using the home’s service panel. An electrical circuit cable will be run from the source point to the fixture box. Many times there will be a receptacle near the closet, or this may run through the attic to find a suitable spot. It is important the electrician tests to make sure the circuit can accommodate the fixture.

The electrician in Beverly Hills will connect the fixture following the wiring diagram from the manufacturer. The wiring connections will be completed at the source point. Finally he or she will restore power to the circuit and test the light fixture.

As you can see, this is a relatively complex task and not one you want to tackle alone. If you are considering the installation of closet lighting for your home, make sure you work with the best— the expert electrical team from Electric Connection is always here for you and ready to take on any type of lighting installation project you may have.

In this high-tech age, our gadgets can be essential lifelines. Smartphones, tablets, laptops and other devices are what help us connect with colleagues, avoid boredom and find our way from Point A to Point B. They can seem almost magic, but there’s one great equalizer that limits them all: battery life.

If you depend on your devices, keeping them charged is critical. But life doesn’t always work that way; you often can’t stay tethered to an outlet for an hour or more, and sometimes an outlet just isn’t there when you need it. And that’s where portable chargers come in.

Power to Go

A portable charger is like a second battery for your device, and some models hold enough juice to charge your devices a few times over. Charge your trusty portable charger at the same time you charge your phone, and you can walk around with double, triple or even quadruple the battery life you’re accustomed to.

The portable charger market is getting bigger all the time, so choosing a model can feel a little overwhelming. But that also means that if you know what factors to consider, you can find the perfect charger for your needs.

When shopping for a portable charger, consider these key attributes:

Size and weight: The smallest portable chargers are about the size of a tube of lipstick, while others may be as big as your hand and nearly an inch thick. Similarly, some are virtually weightless, compared to larger chargers that are even heavier than they look. You might want one of each -- one for your pocket and another for your briefcase.

Charge capacity: There is a huge range of available charging capacities -- that is, how much energy each charger can store at once. Capacity is measured in milliamps per hour (mAh), and models can range from around 3,000 mAh (enough to double the battery life of your smartphone) to more than 20,000 mAh, which is ideal for laptops.

Charge speed: Nobody likes to wait, and some charger manufacturers capitalize on this by emphasizing charging speed in their designs. It’s common for chargers to be marketed based on how quickly they can charge common devices, so look for this detail if speed is important to you.

Connections and cords: Virtually all portable chargers have a USB port, but some may support several types of connections and come equipped with a variety of cords.

Special features: While many chargers just stick to Job #1, others may have features like built-in flashlights or emergency alarms.

Durability: Portable chargers are particularly popular among those who like to go off the beaten path while remaining connected. That’s why some manufacturers make their chargers waterproof, shatterproof and otherwise tough as nails.

Price: When price is an object, you’ll be able to find some chargers for as little as about $10. For the most durable chargers with the highest capacities, prices can exceed $100.

When you need a recharge on the fly, portable chargers are clearly the way to go. But if you ever have trouble getting a charge in your own home, don’t hesitate to reach out to your professional local electricians!