How do tripped circuit breakers happen in the first place? An overloaded circuit is the most common reason for a breaker tripping and usually happens when a circuit has more electrical load connected to it than it really should have. Let’s say you have a 15 Amp circuit breaker that is protecting a 15 Amp circuit. If 20 Amps of current start flowing through it because a toaster, TV, radio and space heater were all connected to the same circuit and were on at the same time, then what you’re left with are tripped circuit breakers aimed to prevent overheating of the circuit.

Allow Kolb Electric, one of the premier electricians in Alexandria, Arlington, Fairfax and all of Northern VA, to guide you through the process of resetting tripped circuit breakers, which is actually quite easy.

If your breaker continues to trip immediately after you’ve reset it, this is indicative of a direct short. Do not try to reset your breakers at this point. If these steps don’t help you resolve your tripped circuit breaker problem, it’s time for you to contact a quality electrician in Virginia who can uncover the source of the problem, which could be due to one of the following:

Time, experience and technology are constantly improving the way we do things. This includes how we build homes. We need electricity in our homes, but at times, it can prove to be dangerous. Because of this, we are constantly learning new ways of making electricity in the home a little safer. New guidelines and updated code requirements are designed to make homes safer, but older homes that were built more than 30 years ago are still using outdated wiring methods. An electrician in Beverly Hills can help you determine what kind of wiring is in your home and whether or not it is outdated and in need of updating. You can rely on The Electric Connection to tell you what you need in order to make your electrical wiring as safe as possible.

An initial inspection will need to be done to verify the condition of the home’s wiring. There is a chance it has been updated at some point. One of the biggest hazards that may be lurking behind your walls is cloth-insulated wiring. This is typical in homes built before 1950. The cloth breaks down over time and leaves wires bare and prone to electrical fires. If this is the case and the cloth insulating the wires has become brittle, it is important to have the home rewired.

Beverly Hills electrical codes do not typically require homes with outdated wiring to be redone, but it can save you a great deal of money on your homeowner’s insurance as well as give you peace of mind that your home is not a fire risk. If you are not sure about the status of your current electrical wiring, call for an inspection. An electrician, like those at The Electric Connection, can give you the details you need to make an informed decision about what to do.

Is your outdoor lighting helping or hurting your home? At Kolb Electric, we believe that outdoor lighting is an important part of the overall look and function of your Washington, DC area home. From adding to your home’s security to making it look its best no matter what the time of day, outdoor lighting is an important part of your home. If you’re considering installing outdoor lighting in your home, here are some thoughts you need to consider.

Ready to install outdoor lighting in Washington, DC? Contact the Kolb Electric team now!

Are you considering ways in which you can improve your home’s appearance and security? Outdoor landscape lighting in Washington, DC can do both. By combining beautiful outdoor lighting with your home’s landscaping and adding lighting to areas that are dimly lit, you can increase your home’s value and appeal while decreasing the risk of theft.

Outdoor lighting brings several benefits to your home. Some of these include:

Kolb Electric understands how to design lighting plans for your Washington, DC home that provide all three of these benefits. If you’re looking to improve the look, safety, and security of your home then outdoor lighting is the way to go.

Before installing landscape lighting you will need to know the different types available to you. Here are some common options to consider:

LED lights are low-voltage lights that can illuminate small areas, like individual stairs, garden plants or railings. They don’t use much electricity and last a long time, making them an economical investment. They are available as individual lights, spotlights and rope lighting.

For homes with a pool, pool lights improve nighttime swimming by illuminating the water from below the surface. They can also be installed in outdoor hot tubs.

Pathway lights dress up a path and help reduce tripping hazards. These are often low to the ground and can be solar powered, drawing energy from the sun during the day and then expending that energy with a subtle glow at night.

Security lights light up dark spots in the yard to protect against intruders. Some security lighting is triggered by motion, while other lighting stays on all night long.

Which type of outdoor lighting is right for your home? The answer will depend on your goals. Whether you’re looking for additional safety and security, want to spruce up the look of your outdoor space or simply want to highlight a part of your outdoor space, you can find a landscape lighting option that will fit those needs.

If you’re looking to improve your home with outdoor lighting, you are going to need to make some considerations before you invest. Choosing the right lighting starts with understanding how you want to use it. Here are some considerations you can make.

First, decide if you plan to illuminate a dark area of your yard constantly or if you want to turn the lights off after enjoying them. If you’re going to leave the lights on all night long you may wish to invest in an energy efficient lighting option. The more efficient the bulb is, the less you will be spending on energy bills. Remember that you won’t need much light at night so low-voltage and efficient lighting is a great way to keep the energy bills in check.

If you feel that the high energy cost of leaving the lights on is a bad idea for your budget, consider using motion sensors in areas where you need lights for security or safety. Motion sensors will light up the space when someone is present, adding the safety you’re looking for in your home.

Finally, consider what you’re looking to illuminate. This will help you choose between the two main types of outdoor lights – uplighting lights and downlighting lights.

Uplighting lights shine from the ground up on a surface, like a landscaping feature or a tree. Downlighting lights shine down onto the ground, which can illuminate an unsafe area or highlight a plant you wish to show off. Both can be incorporated into your design as you work to illuminate your yard.

When you have a basic idea of what you want in your outdoor lighting, then the real fun can begin. The Kolb Electric team is ready to help you with the design process, so you can be certain your final project will do exactly what you want and need it to do. As you consider your design options, make sure you take these factors into consideration:

If you are ready to transform your home with beautiful outdoor lighting, Kolb Electric is here to help. Our design team and licensed electricians can help you with the entire process, from choosing the lighting that best fits your needs and tastes to installing it expertly. Let us help you create an attractive outdoor lighting scheme in your Maryland, Northern Virginia or DC area home. Give us a call at 877-287-1179 today, or you can contact us online.