We’ve added a new line of 

Using 316 marine-grade stainless steel and polycarbonate lenses, the 60-, 120-, and 180-watt LED boat lights resist damage from shock and vibration. Hardware is included for surface-mounting on a variety of transom types, and the LED lights must be completely submerged to function properly. To prevent failure due to out-of-water use, a built-in temperature protection circuit powers the lights off if they reach 194 degrees Fahrenheit. The underwater boat lights operate within a wide 9-32V DC range and are designed to last 50,000 hours.

As with any type of home repair service, the cost of a project or repair will vary depending on what type of work you need to have done. If you have an electrical repair, for example, the electrician will need to take out his tools and do some electrical troubleshooting in order to determine exactly what and where the problem is. If this is the case, it’s not possible to give an exact electrical estimate before starting, and the job will need to be done on a time an material basis. The electrician should give you an accurate quote of their hourly rates, and the cost of materials that they charge you for should be realistic. If the electrician is knowledgeable and competent and the repair is straight forward, they can usually fix the issue within a fairly short amount of time and at a reasonable cost.

If you need a panel upgrade, new lighting, smoke detectors or any other type of electrical installation, you’ll want to make sure that you know the exact price before the job is started. For your own protection, this is very important.

Electric Connection, a licensed Pasadena electrician, can give you a ballpark price over the phone for most types of electrical installations, and then schedule an appointment to go out to your house or business property to give you a detailed price in writing. Getting a price in writing for the work you need done means no surprises for you at the end of the job and less stress for you while the job is in progress, too.

If you need an electrical update or installation, you can call our office and let us know exactly what you’re looking for, and we’ll be able to give a ballpark figure and some free electrical advice. If you like the ballpark price, we can schedule an appointment to go out to your property and give you an exact electrical estimate in writing. We’re a licensed and bonded electrician Pasadena area residents can depend on. You can also visit our website at www.theelectricconnection.com/electrician-pasadena-ca to find out more.

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

Whether you love the winter season or you aren’t a fan, there’s one thing that can’t be denied—winter is downright expensive. With your heating system roaring, the holidays coming up, and longer nights, you can find yourself neck deep in utility costs in a real hurry. Looking for easy, effective ways to reduce your energy costs this season? If so, the experts at Hoffman Electrical have you covered!

Our certified electricians have been proudly serving Tampa and the surrounding areas for decades. When it comes to quality service and products, we’re just hard to beat! And above all else, our experts are here to help. Sometimes that means electrical repair and installation, and sometimes that means just some good old fashioned useful tips.