Older homes generally have a character quality that can’t be seen in newer houses. These homes offer great value, and renovation improvements can bring new life into them. Unfortunately often enough the electrical wiring is never inspected during these updates for years at a time. To ensure that all your hard work is going to be safe, look for these common dangers that could threaten your older home.

From the 50s to 70s many homes were built with aluminum wiring. This was used because it was cheaper and more conductive than copper wiring. Unfortunately many pitfalls were found with aluminum wiring after it was used. Overheating and cracking are common problems with aluminum wiring. If your home was built in this time period, have your wires inspected. There could be a number of hazardous points behind your walls that may cause major issues. For more information and hazard signs of aluminum wiring, read our blog article.

Knob and tube wiring was used in homes in the early 1900s and even as early as 50 years ago. It is possible that these homes still contain knob and tube wiring in them. This wiring can be dangerous as it is more likely to crack and result in electrical fires.

The dangers of these two out-dated wiring systems are that they were installed without worry and the problems were not realized until years later. The electrical wiring systems in these homes were left untouched and so did the problems that came with them. Electrical fires, are especially dangerous as the fire starts and spreads quickly and out of sight. By the time the fire is visible it is too late and the damage can be done.

Over the years homes can see additions: new rooms added onto the home, new electrical lines added, hot tubs, etc. If a licenced electrician did not perform these additions there can be a mess of wire connecting the additions to the original home. This problem comes to a head at the service panel. If it is not properly maintained the breaker will trip constantly and electrical outlets will be overloaded. This is very dangerous as the electrical panel is in charge of keeping your home safe from electrical hazards. It is very important that the electrical panel is upgraded in order to provide the correct control of electricity throughout the entire house, old and new. This also means the panel is properly labelled so it is easy to maintain if further updates are being made.

While there is nothing wrong with purchasing an older home, we recommend that a licenced electrician inspect the electrical system in order to identify potential electrical hazards. One of our expert electricians can provide you with a list of items that should be handled. This will help you have peace of mind that your family is safe in their home.

Why do breakers trip? Have you ever turned on the vacuum or started the microwave while the toaster was in operation and experienced a tripped breaker? If you have ever dealt with a breaker that trips, you are probably wondering why it happened and want to know what that means for the safety of your home. An electrician in Pasadena is here to explain. You can learn more by calling The Electric Connection.

First of all, it is important to explain what a tripped breaker really is. Your breaker panel is probably located outside or in a hallway or basement area. When a breaker trips, it cuts off all flow of electricity to the outlets and light fixtures that the particular breaker supplies electricity to. When looking at the breaker panel, the tripped breaker will be slightly in the middle instead of all the way left or right. An orange bar is usually used to indicate which breaker has tripped.

As far as why the breaker trips, there are 3 main reasons • Short Circuit

An overloaded circuit is probably one of the most common reasons. If your breaker isn’t powerful enough to run several appliances at once, like the microwave, vacuum and toaster, it becomes overloaded and shuts down. You can address this by distributing your electrical draw to different outlets that are run by different breakers or by having your Pasadena electrical system investigated. You may be in need of additional breakers. A ground fault or short circuit are much more dangerous than an overloaded circuit. Breakers that have bare wires or a bad connection can cause fires. If you don’t see anything out of the ordinary, but are still having trouble with a tripping breaker, give the folks at The Electric Connection a call.

Explosion proof fixtures are a necessity for environments which output potentially explosive or flammable fumes, produce dust of dirt in the air, or similar situations in which a gas could enter the fixture and cause damage to the light or well-being of the facility.

If you are currently running or working with a facility which requires these explosion proof light fixtures, the list of 3 must-haves below will clear the air and hopefully set you on the right track to ensuring you have the proper setup and design.

First on the list, we are going to talk about the actual technology within the fixture and why it is so important.

While a big part of vapor proof lights is the actual fixture and its design, we think the luminaire within the fixture is equally as important.

We simply can’t recommend any other technology other than LED because we truly believe in it. To give you a little bit of insight on industrial LEDs, here are some of the reasons why companies of all sorts are converting to LED:

As you can see, just from these three main benefits that all sorts of facilities are realizing can really be game changing in terms of savings.

For these reasons (and more), we thought it was a must to have it first on the list.

Interested in learning more? Find Class 1 Div 2. For this reason, we suggest you always inquire with a reputable and knowledgeable company that offers and deals with explosion proof lighting when inquiring about your lighting project.

If you can’t find a reputable company to ask your questions, just LED explosion proofs offer the long-term solution is clear.

Especially when you consider in rebates, your initial upfront investment can be reduced greatly. While these rebates do vary from place to place, they are most often available when you buy DLC qualified fixtures. Not only are DLC qualified fixtures going to make you more eligible for rebates through your utility company, but they also provide other benefits. The biggest benefit of buying DLC qualified lights is they have ben tried and tested and, in most cases, do what they claim. In a busy world of lighting, not all products do exactly what they say. This is most common when a light is not qualified by something like the DLC.

Our main advice is this; to get the best value buy only DLC qualified fixtures. If you don’t, you may actually end up spending more upfront (by not getting any rebates) as well as more energy usage overtime, due to a less efficient build.

Another major cost saver can come through retrofitting. The only time you can retrofit is if your fixture is still functional and can fit a LED retrofit in it. If you do not match these requirements, then a full replacement will (typically) be required.

If you can, we suggest you retrofit. It saves money in two ways: retrofit kits are cheaper than full fixture replacements and the cost to retrofit is typically less time consuming and thus, less expensive.

In Summary

We know that a sensitive environment can be stressful to deal with, especially when it comes to the lighting system and the safety of the facility.

The above 3 must-haves are just the beginning, and each situation can vary greatly. As always, we suggest you consult with some lighting professionals to truly discover what you may require for your facility and operations.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!