Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.

Cost, energy savings, maintenance and aesthetics must all be taken into account to optimize your budget and bring out the best in your home with the finest lighting design.

1.   Fluorescent and CFL (compact fluorescent) lamps work well in areas that require cooler, energy-efficient general illumination, such as undercabinet lighting and cove lighting in kitchens or flush-mount ceiling fixtures in garages and basements.

2.  Low-voltage halogen lamps are best for accent lighting and to provide luxurious illumination in areas of the home that call for a more up-scaled look, such as living rooms, bedrooms, dining rooms and master bathrooms.

3.  For task lighting, choose LED (light-emitting diode) desk lamps, reading lamps, track lighting and mini-pendants. Bulbrite’s Generation 3 dimmable LED lamps provide great color rendering and light output, perfect for track and recessed fixtures. 

 4.  LED lamps are becoming the standard for outdoor lighting, too, due to their low-maintenance and high energy-efficiency. Although the initial cost for LED lamps is considerably higher, you will find tremendous long-term savings in energy, maintenance and replacement costs—especially in areas where illumination is frequently needed such as outdoor security lighting.

5.  Incandescent lamps are still popular for portable lighting and ceiling fixtures to provide pleasant general illumination.  Aim for energy-efficient incandescent:  Bulbrite’s Eco-Friendly Halogen A19 standard bulb is energy-saving, fully dimmable and available in clear or soft white.

Note:  Do not skimp and buy bulbs of lesser quality, because substandard bulbs may emit a poor quality of light and may burn out prematurely.  Purchase your lighting from a reputable dealer who will stand behind the quality of their merchandise.

For more information on updating your home with quality, energy-efficient lighting, visit a Capitol Lighting showroom and meet with a professional lighting consultant.

Frances Ellen Watkins Harper (1825-1911). Her bio is beyond the scope of this entry, but I encourage you to follow the link and check her out. Get a little perspective on life today by reading a paragraph about this amazing human being and poet.

Harper’s poem, “Let the Light Enter,” depicts light in an interesting and fresh way, fresh still, even 100 years after her death. Poetry, generally speaking, is like a vast collection of opportunities to learn about yourself and the world in which you live. I invite you to take a minute to read “Let the Light Enter.”

The Dying Words of Goethe

He just urgently wants to watch the “balmy sunshine/ Play around” his deathbed. He just wants to experience the sensation of light doing it’s thing. “More light!” he demands. It strongly suggests that appreciating and enjoying the beauty of light is what Goethe, a lifelong thinker and poet who lived from 1749 to 1832, finds most worthy of his final precious minutes. That’s a big deal. In choosing between the pleasure of thoughts and the pleasure of the material world, he chooses the latter. It’s like all the things that seem to separate us from the natural world are shown to be false in the final moments. Think of a dog lying on a rock in the sun. Maybe that’s the purest state of being, just lying there, not thinking much, and enjoying the pleasure of the light, the sound of a brook. And maybe that’s why Goethe wants to pass away in such a state.

When we talk about replacing commercial and industrial lighting, we always try to alleviate the current costs that old and inefficient lighting fixtures incur while keeping (if not improving) our current quality of light in place. This is done with the obvious options such as:

With any lighting technology, whether that be Metal Halide, HPS, Florescent, or LED, they all suffer from something we call lumen depreciation.

Lumen depreciation is the process in which the total output of lumens a fixture produces decreases during its life. The rate at which a fixtures lumens depreciate can depend on a multitude of factors which include (but are not limited to): the type of lighting technology used, total hours used, and various other factors.

Did you know that florescent and LED lighting are typically the lowest to depreciate it’s lumens, while technology like Metal Halide and HPS are typically the fastest to depreciate it’s lumen output?

While LED is the the winner overall, florescent lights aren’t too far behind and not nearly as bad as Metal Halide or HPS lights. Here at MyLEDLightingGuide, we would recommend you get an LED for a lot more reasons then just slower lumen depreciation. email us directly.