Everyone is looking for ways to save power.  Whether to save money or the planet, one of the best and most popular ways to save power on lighting is by installing dimmer switches to control your lights.  Besides saving power, they’re also great for setting the mood in your home.  More and more dimmer switches are being installed in American homes every year.

Dimmer switches are easy to install, even for an everyday person. Of course, even an easy installation can be problematic, so you should always contact the best Dallas electrician to ensure that you’re doing things right, or to perform the dimmer switch installation for you if you don’t want to take a chance of making a mistake.  Either way, here are some important do-it-yourself electrical tip to keep in mind about dimmer switches:

Hot tub wiring and circuits are a big request this time of year.  Summer specials such as those going on at the Iowa State Fair dramatically increase sales.  With many hot tub brands to choose from such as Hot Springs Spas, Maax Spas, California Cooperage, Jacuzzi, Caldera Spas, and Thermo Spas the choices are numerous.  Hot tub installers typically do not wire your hot tub unless there is a specific and properly wired disconnect in place.  The hot tub circuit with disconnect must be installed by a licensed electrician.  The hot tub or pool disconnect has certain requirements pertaining to the type and distance required from your pool or hot tub.  In addition to this the circuit must be the required ampacity and voltage intended for your hot tub in order to insure the safe and reliable operation for you and your family.  Never trust someone that is not an electrician trained in proper hot tub wiring.  

Installing the proper hot tub wiring is not a project for that handy family member or the guy down the street.  Hot tub wiring must be done properly and to state and local building codes.  In addition the wiring must be done to strict National Electrical Codes.  All of our electricians that are trained in hot tub wiring follow the code to ensure you and your family are as safe as possible.

Just like hot tub wiring, pool wiring must only be done by a trained and trusted professional.  Pool wiring has strict guidelines set in place for your safety.  Bonding, grounding, and GFCI protection are all major concerns when installing wiring for your pool.  Pool wiring is not a do it yourself project and should only be done by a licensed electrician.  We work with several of Des Moines top pool installers to insure your next pool project is done to the highest of standards.  The code is in place and should be followed closely with no exceptions.

There is no time like the present to take care of some of the little things around the house. While you can certainly grease a squeaky door hinge or take care of that leaking faucet, there are some upgrades that are best left to the professionals. Things like electrical work should only be dealt with by a certified electrician. The Electric Connection has a team of certified electricians who can take care of any Burbank electrical needs you may have.

Some things you can do to make you home safer as well as increase the appearance and overall value are rather simple and inexpensive. One item that should be on your electrical upgrade list is to replace outlets in the kitchen and bathroom with GCFI outlets. These outlets prevent against electric shock. Because bathroom and kitchen areas are prone to water accidents, new codes require they be used in these areas.

Another option you may want to consider is the upgrading of certain light fixtures. New light fixtures not only look better, but in many cases they are more energy efficient. Think of it as giving your home a facelift. You will have the freedom to choose which light fixture you want to have installed in a room in order to compliment the space and décor.

An electrician in Burbank can also take care of the installation of a ceiling fan. These are extremely handy to have and can also help reduce your electrical bill. They are aesthetically pleasing and can help keep you cool in the summer and warm in the winter by circulating the warm air around.

If you have any other items on your electrical wish list, give The Electric Connection a call. We can certainly help you with all your electrical needs.

The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.