Recently, Digital Trends profiled a Paolo di Trapani, and his work has a lot of people excited. For all the rapid progress that has been made with LEDs, no one else has made this important step towards recreating natural light.

The article explains how lighting innovations have allowed people to use artificial light in a number of amazing ways. We can change the color temperature of a light bulb with a smartphone, and we can grow food indoors, but we haven’t yet been able to mimic the way the atmosphere scatters the sun’s natural light…until now.

According to Digital Trends, di Trapani’s technology scatters the light of a panel of white LEDs with “a clear plastic panel studded with nanoparticles that are invisible to the naked eye.” What’s a nanopartical? A nanoparticle is what it sounds like: A really small particle. Nanoparticle research is currently hot because there are tons of ways that nanoparticle research could be applied in biomedical, optical, and electronic fields.

2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.

The costs of lighting changes from year to year. As technology gets better and demand increases, prices drop, effcicieny increases, and everyone is in a win-win situation. With this ever changing landscape comes misinformation, which is why we have put together this post.

This post is going to lay out the true tennis court lighting costs for 2017. On top of that, we are going to go over some tips and things to be on the look out for in regards to choosing the best light fixture for your tennis court that will save you money and produce the best illumination possible.

This post will be broken into two parts; the average costs that are associated with the actual light fixtures themselves and the costs associated with them. Then, the average costs of powering your lights and how to achieve a higher return on investment by being a smart buyer.

Let’s start off with defining what exactly tennis court lighting is, and why it matters.

For starters, tennis court lighting is the application term for high mast lighting. High masts are the other technical terms, there are many that go far beyond the scope of this post. But, we think you should know the definition of lumens as we use it quite often. Technically, a lumen is the SI unit of luminous flux. Although that doesn’t say much, just know that lumens, in simple terms, is the amount of light being emitted by a given fixture. The more lumens, the more light you will have being output.

Now that we have a basic understanding of what tennis court lights actually are, we can get into the real costs of tennis court lights. Hopefully, these costs allow you to be aware of all the options and give you a better understanding on how to go about selecting the proper lighting technology for your court.

The costs associated with your tennis court / retrofit kits are typically much cheaper)

4. Quantity of fixtures needed

5. Your tennis court lux requirements or desires

As with any industry, what brand you buy from and what technology you buy is going to be the biggest cost variable. The most important thing to keep in mind is not only the initial costs of a fixture, but also the costs of running such fixtures over the span of it’s lifetime.

If, for example, you have one light that consumes 1000 watts of light and another that consumes 400 watts but the first one was only $500 and the second one was $1,000, which would you buy all else equal? Well, assuming they both output the same amount of light it actually makese sense to go with the second light, even though it costs twice as much.

Why you ask?

Because the cost to operate the 1000 watt light is more than double that of the 400 watt light, which over the lights lifespan can actually end up costing you much more to run the 1000w light.

These numbers aren’t entirely fictionary either, in fact; they are very close to real life examples we have seen when other tennis courts convert to LED technology from metal halide or HPS. What we haven’t described in the above example though is other cost saving benefits that LED has besides just being more efficient; but we will get to that later.

As for actual costs, they can vary far too greatly for us to list here. It all depends on what lighting technology you choose (think LED, metal halide, etc), which company you buy from, the quantity you need, if you are retrofitting or fully replacing your fixture, and what your lumen output requirements are.

A quick note on retrofitting or replacing in simple terms; retrofitting is typically cheaper for a couple of reasons. Retrofitting in short, is the process of replacing only the luminaire source from your fixture, instead of the entire fixture itself. LED vs metal halide cost to run in our example, the cost analysis can be run between any technologies in the same way. As you will see though after comparing metal halide’s  cost to run vs LED, that LED is far more efficient and costs significantly less to run.

Let’s get into the example:

Let us assume you have 10 lights. Currently, your high masts are metal halide and use 1,000 watts per fixture. Now, let’s assume you are looking for a more efficient technology and you come across LED high mast lights. You find a comparable light which will output the same amount of light (or lumens), but only consumes 400 watts per fixture.

In total, the metal halide lights are consuming 10,000 watts (assuming you have 10 lights) and the LEDs would be using only 4,000 watts if installed. That is 2.5 times less energy being consumed, which can visibility lead to huge savings.

This reduction from 1,000 watts to 400 watts per fixture in the metal halide to LED conversion in exactly why sports field, including tennis courts, are converting to LED.

Extra Tips for Reducing Costs

Conclusion

Hopefully the explainations of where the cost of tennis court lights are in 2017 have been thorough. While it’s impossible to give exact prices for every scenario, we hope this has been a starting point to your tennis courts lighting system.

Whenever you have an electrical issue that needs to be addressed immediately, then you may need to call an emergency electrician in Burbank.  When confronted with this type of issue, it is always best to call right away. Waiting to deal with electrical emergencies can lead to worse problems and dangerous situations. To account for this type of electrical issues, most electricians provide emergency service at all times to ensure that your problem can be quickly and professionally taken care of. It is important that our electrical systems function safely and properly, making it necessary to provide 24 hour service.

Is It Really an Emergency?

One important difference between an electrician’s standard service and their emergency service is the rate. Emergency service typically costs a significant amount more than standard service, because it is outside of their normal hours. Before you pick up the phone to call an electrician Burbank after hours, think about whether or not your problem is an emergency. An example of an emergency would be losing power at your business such as a restaurant. Because the loss of power can lead to extensive inventory and business loss, it makes sense to have someone come out right away. Another example of an emergency situation would be any electrical issue that poses a danger to you or someone else.

After one of the technicians at The Electric Connection is on the way, all you will need to do is wait. Try to avoid messing around with the electrical issue on your own, because it could be potentially dangerous. Your best course of action is to get as comfortable as possible and wait for one of our electricians to arrive. This will save you from any unnecessary injuries, and ensure that you are ready to direct us to where we need to go upon arrival.

Visit our company profile.