Millions of dollars can be saved every year in every major or little city in this country and those around the world. This sounds like a newspaper headline but it is the actual hard truth. The amount of energy necessary for street lighting is massive. For example, Britain needs about 1900 gigawatt hours for street lighting alone, which yields 3 million tons of carbon dioxide emissions which could all be avoided and greatly reduced. Imagine cutting that down to 20%. Can it be done? Of course it can, LED street lights have been proved to have that effect.

With the economic crises, cities have started to switch off lights to save up on the electricity bill. This is one of the many solution proposed. Unfortunately, LED street lights were not proposed and that is a major mistake.  There are installation costs you might say. Well, sometimes there are, but these are equal to zero based on savings achieved over time. It means not seeing the whole picture because the lighting systems now used on the streets needs extensive costly maintenance while LED street lights will need almost none.

This is not a small fact. Maintenance means dozens of monthly salaries and costs with equipment and cars. This is only for one city but imagine the positive effect of this at a country scale or even a global scale. It will actually make a difference. In addition, these LED lamps are retrofit so there are not additional costs on that. Simply when one light burns out it should be replaced with an LED which reduces your costs by not having to fully replace your lights entirely.

There have been cases when the LED obvious benefits are:

The list can surely go on. Most people get stuck on the price but at such a big number of Street Light LEDs needed any dealer will be more than happy to negotiate a solution for the whole city so the costs will be lower than normal. In addition, the provider will stick around with advice and consultation.

In the end, it is just a matter of putting ideas into practice. Only this way we will manage to create a better world.

Museums have a hard line to walk, exhibiting items for public education and enjoyment while protecting those same collections from damage. Today’s museum also carry the additional weight of safeguarding the future of the environment – as well as their financial future – against the dangers of unnecessary energy consumption. What advancements have been made in preservation lighting technology to help accomplish these goals?

Light, including all three types: ultraviolet (UV), infrared, and visible light, causes permanent and irreversible damage to museum pieces. Cumulative and dependent on the intensity and duration of exposure, light affects chemical composition, physical structure, and, the appearance of a collection. There is no conservation treatment that can repair it. Light damage is forever.

Only complete darkness ensures conservation, since exposure to light in any form naturally breaks down items. However, keeping pieces locked away in the dark defeats the mission of the museum – sharing those works with the public. It is thus a museum’s dilemma to find a suitable solution that balances the best of both worlds, in addition to considering energy costs and the environmental impact of its lighting selection.  

In your search for preservation lighting, you will find that a great deal of lighting solutions involve UV (ultraviolet light), the most energetic and destructive form of light. These include natural light, fluorescents, HID, and tungsten halogen lighting. Fortunately, the effects of UV can be controlled with simple filters, offering a greater variety of lighting options. UV filters are hard plastic tubes or soft sleeves wrapped around bulbs/light sources, which filter and block up to 98 percent of UV light, preventing its damaging effects. NOTE: UV filters lose efficiency over time and must be replaced every eight-10 years.

Specific, detailed recommendations for preservation lighting levels based on your collection type can be found from various sources, including the Library of Congress, National Park Service, UNESCO, and more.

All bathroom spaces have high levels of humidity and moisture and this is unavoidable. However, if the moisture is allowed to linger in the air for a very long time without being vented out of the space, it can result in mould and mildew growth on the grouting, the drywall structure as well as along the window ceilings and air conditioning ducts and can damage other aspects of your home’s structure as well.

In some cases, water damage may also occur which can become expensive to fix. That is why every bathroom in your home or commercial property should have an exhaust fan installation to suck out the moisture from the air and release it outside the structure. This may seem like an easy job and DIY enthusiasts sometimes feel, it’s a job they would be able to manage themselves.

But the fact is it’s never a good idea to play with electricity. Even something as seemingly simple as an exhaust fan installation can pose the risk of electrocution or death when handled incorrectly. The bathroom exhaust fan installation has to be handled with care, primarily due to the high moisture content interacting with the electricity that’s running through your exhaust fan.

We’re excited to announce the addition of six new off-road LED light bars to our SBL series product line. The 12″, 30″, 50″ light bars are equipped with two rows of powerful LEDs that emit anywhere from 1,100 to 10,000 lumens depending on the length of the bar.  These heavy-duty light bars can be used for many applications, including off-road driving lights, daytime running lights, or fog lights on trucks, ATVs, or UTVs as well as for work lighting, industrial lighting, marine lighting, and tractor lighting.

LEDs in these light bars emit either a wide flood beam or a combination spot/flood beam pattern for focusing on long- and short-range distances simultaneously.

Been keeping up with our blog? If so, you may have been noticing a lot of talk about electrical code, and how important it is. Why all of the insistence? Because code is code for a reason! Not only is the electrical code here in Baltimore set to protect your home, but it protects you as well. And to the electricians at Kolb Electric, nothing is more important than your safety!

This is why your Baltimore electricians offer comprehensive code inspections. We want to guarantee your home or business is safe and secure. And we want to keep you out of possible legal issues, too! And that’s always good. But what exactly is a code inspection, and what does it entail? Let’s find out!

When we provide an electrical code inspection in Baltimore, we want to cover each and every base. This means we start at the top, work our way down, and keep going until we’re satisfied with the safety and integrity of your electrical systems. Our process includes:

Out of all the questions a Baltimore electrician at Kolb receives, this might be one of the easiest. The NEC electrical code was established and remains relevant because electricity, when poorly used or misused, is very dangerous. Code must be observed and enforced, for both safety and legal reasons. And to the team at Kolb, meeting your needs is our primary objective.

Need code-related services or code corrections from a certified and trustworthy Baltimore electrician? Our specialists would be proud to provide! We’ve been handling electrical services in Maryland for nearly a century, and our name is trusted for a reason. Kolb always brings the best, and we can guarantee you the service you deserve! Contact our experts today!