It has been six months since I started writing for the Light Reading blog, and boy has it gone by quickly. It’s hard to believe that I have written almost 50 posts! To mark this occasion, here are the six blog posts YOU liked best during my last six months of blogging.

1. via Strobel Design Build

In retrospect, I can see why this has been such a hit with the Light Reading readership. I mean, when it comes toMinions Web

This post was one of those visual, inspirational posts that I enjoy reading on other blogs. Instead of giving step by step instructions, this blog post shows you a bunch on interesting things that people have done with LED Matthew Danser Photography

This was my first blog post for Pegasus! In it, I interview Austin, TX photographer Matthew Danser to find out how he “paints” with light in his photos. We learn some interested photography tricks – tricks that I try out in the next most popular post.

5.

In this post I take some of Danser’s suggestions and experiment with “light painting” in my apartment at night. There’s lots of fun stuff here, and things get a little weird with my designs, but hey! It was an experiment! No stuffed animals were hurt during this photo shoot.

6.

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.