Depending on the size of your warehouse, as a manager (or owner) of that facility; you probably know that your building consumes a considerable amount of energy.

From your lighting system to your heating and cooling, to make such large buildings meet “workable” conditions can be tough and expensive. Although, this post is here to gather 5 critical ways on how you can meet green initiatives for your companies warehouse operations, all while maintaining those workable conditions your employees require.

By implementing the following ways, you will be able to realize a great reduction in not only energy waste, but also overhead costs associated with powering that wasted energy month to month. So there are two major benefits from all of this; one being you will create a more sustainable warehouse all while secondly reducing month to month expenses associated with operating your warehouse.

Without further ado, here is the first of many on this list of ways to save energy in your warehouse facility…

Imagine how great it would be to have the same amount of light that is outside, inside. Best part? It won’t be coming from artificial lights which cost money to run, but rather a natural light source that costs nothing other than installing skylights for that light to come in. This will easily and greatly reduce the amount of time that you need any type of light on in your warehouse.

Allow sun to illuminate your facility by installing skylights throughout your building!

These days HVAC is nearly installed in every building, including warehouses. Multiple things could be messing up your efficiency when it comes to heating, ventilating, and cooling your warehouse, and they all go back to that HVAC system.

For starters, ensuring that your professional building commissioning company to run a full audit of your warehouse, and they will tell you exactly what you need to work on for your building to be running exactly how it was built to run.

Conclusion

The process of addressing (let alone fixing) these issues and areas of concern may seem overwhelming, but keeping the end goal in mind will make the efforts to make these changes in your warehouse much easier. Taking it one at a time will make all the difference, but ensuring you are working on them overtime will be all that is needed. Just remember, all of these critical ways to reduce energy are going to not only make your company more sustainable, but it will also save you tons in overhead.

Have any other ways to save energy specifically in warehouses? Comment them down below to help out other warehouse managers / owners alike!

Have you ever walked into your kitchen and tried to use the toaster only to discover it had been unplugged. Then you remember you unplugged it because you needed to use the can opener and didn’t want to unplug the Crockpot, interrupting your dinner. If you have ever experienced anything like this, then you probably need the help of an electrician in Pasadena, like those at The Electric Connection. Stop the frustration by having an electrician install additional outlets in your kitchen.

Older homes that have been renovated and made more modern tend to overlook the outlet situation in the kitchen. Fifty years ago, kitchen appliances were very minimal or considered a major luxury. In today’s world, we can’t make coffee or open a can of beans without an electrical outlet. With all the lovely appliances available today that make our lives easier, it is only normal we would want the power to use them.

You can remedy the situation with the help of an electrician. Pasadena residents can transform their kitchen into a space that works for them by having additional outlets installed. Before this can happen, the electrician will need to check out the existing electric panel to determine whether or not the current breaker can support more outlets. In most cases, an additional breaker may be needed to support the outlets. This is something an electrician can take care of for you. When it is time to install the new outlets, it is a good idea to have the electrician replace the old outlets in the kitchen with GFCI outlets. These are the standard in new home construction in the kitchen and bathroom areas. They prevent electric shock if water is splashed on an appliance. If you are ready to make your kitchen start working for you, give The Electric Connection a call today.

Electricity is an important part of our life. However, when it comes to electricity distribution, it needs to be done in a safe and secure manner. It entails several handling hazards, which, when not done safely, can easily turn into a deadly trap. There are times when accidents and mishaps happen due to the lack of safety at different power distribution units.

Therefore, to maintain the security levels at all distribution units and sub stations, it is critical to install safety devices and mechanisms. While there are many mechanisms that help in safeguarding electrical connections at residential and industrial areas, switchgear is one of the most popular ones due to its various functions and features.

Analyzing switchgears from the perspective of commercial, industrial, and institutional MV (medium voltage) distribution system, its functions are as follows:

Types of Switchgears

There are two main types of switchgears which are necessary for various commercial, residential, and industrial electrical connections. They are:

The rule of 3’s. They’re the triple threat of lighting design. Three types of lighting: ambient, task and accent. Three levels of design: top, middle & bottom. For today’s blog post I’ve put together a quick reference guide on what the different layers are, along with a few tips on how to use them to pull your space together.

Three Layers of Light: Ambient, Task & Accent

this interactive picture that shows the dramatic difference in a kitchen after under cabinet lights were added. (That’s next on my project list!)

3. Accent lights add depth & dimension and showcase individual items or areas. A favorite painting or photograph displayed under a picture light on the wall is a popular way to accent with lighting. One of my favorite examples of decorative outdoor accent lighting are Annie’s original post to see if you’re right.]

Three Layers of Design: Top, Middle & Bottom