2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.

We know your family’s safety is important to you, but have you ensured their electrical safety? The amount of electricity running through your home has enough power to cause death if electrocuted.  Implementing a few simple tips regarding your cords and plugs, outlets, and circuit breakers could potentially prevent injuries or fires in your home.

Cords & Plugs

All your electrical appliances have cords, and being a daily item, many times we overlook any wear-and-tear that could potentially be a safety hazard to your family and home. Make it a habit to check each appliance’s cords and plugs before every use. Check your cords for any frays, cracks or kinks. If they are damaged, replace the power cord before use; such exposures could be a fire hazard.

Also, make sure to be using your cords appropriately. As much as you want to tuck away or hide your cords, never staple or nail cords in position! Try using tape or twist ties to secure your cords safely. Also, refrain from running your cords through doorways or under rugs, this could cause damage to the cord or cause overheating. Instead try using an extension cord to safely reach that desired location in your home. Although, extension cords are not intended for permanent use, this should only be a temporary solution. Consider rewiring if you are really tied to having your appliance in a specific out-of-reach position.

Outlets

Once you are confident that your cords are safe, now you need to ensure that your outlets are also safe. Every outlet should have its wires covered by a secure plate and if you have children, make sure your unused outlets are covered with a childproof cap. Avoid using multiple adaptors or power strips, which can overload your outlets and cause fire hazards. Instead, relocate your appliances to another outlet.

For outlets located near a water sources like your bathroom and kitchen, you should check to make sure that your home is equipped with a GFCI (ground-fault circuit interrupter) outlet. This is a fairly new technology of which is now mandatory in all new houses built. A GFCI will protect your family from electrical shock if it ever comes in contact with water.

Circuit Breaker

Your circuit breaker protects electrical wiring from overheating or catching fire. If too much electricity is passed through a certain fuse it will “blow;” breaking the flow of electricity. If this happens, the fuse needs to be replaced – make sure to find the right size fuse to allow the appropriate flow of electricity. Your circuit breaker should always be easily accessible and all members of your family should be aware of its location and how to use it when the time comes.

Your electrical appliances, outlets and circuit breakers are constantly changing over time so make sure to be checking them regularly. Make this a household habit for your whole family. If you notice any signs of electrical issues such as dimming or flickering lights, unusual sizzling or buzzing sounds, or if your circuit breaker is continuously tripping, call an electrician from Expert Electric at 604-681-8338. One of our experienced electricians will gladly examine your home for any electrical concerns.

Your family’s safety is our top priority!

Were you aware of the fact that your home electrical equipment is frequently bombarded by very brief spikes in electrical power called power surges? These surges can slowly burn up the inside of your electronic devices, leading to a shorter lifespan than you should normally have. Although the most dangerous type of power surge comes from outside of your home and could destroy your devices in one fell swoop, this type of surge only accounts for about 30% of all power surges. The other 70% of power surges are generated from within your home. These surges are caused by some of your larger appliances like refrigerators and air conditioners.

A large power surge causes very fast, widespread damage. This can cause your wiring to burn up, devices to short circuit and motors to seize. Whenever you think of power surges, this is typically what comes to mind. The majority of power surges, however, remain unnoticed until your device meets an early end. This type of incremental power surge slowly eats away at the components of your electronics until they no longer function.

While it may seem like there is not much that you can do to prevent this, there is. One of the best ways to prevent against both large and incremental power surges is with surge suppression systems. This includes a combination of both local and whole house surge protection. For the largest level of protection, you should have your local electrician in Beverly Hills install a whole house surge protector. You can then protect especially sensitive devices with their own individual surge protectors.

By protecting your home from power surges, you help to ensure that your devices have a long lifespan. This not only keeps everything running as it should, but also saves you money in the long run. If you have any questions about whole house surge suppression, or would like to schedule an appointment for installation, get in touch with any of our technicians at The Electric Connection. You can also learn more from the resources at The Electric Connection website .