It is estimated that thousands of electric shock accidents take place each year, of which some are fatal ones. Aside from this, there are incidents of electrical fires caused by poorly-installed or ill-maintained wiring. It’s important to understand that most of these fires and accidents are avoidable. There are some simple things you can do to prevent an electrical fire from erupting on your property, including:

Never try to force plugs into the outlets and don’t remove the third prong which is the grounding pin, to fit it a plug into an outlet with 2 prongs. Do not plug in too many appliances into a multi-plug outlet.

Check whether there are any loose-fitting plugs as these can be a fire/shock hazard. If you notice that any of the wall plates are broken/missing, replace them without delay. So that the components and wiring aren’t exposed. If you have very young kids in your home, make sure that you cover all used outlets.

Check the cords for fraying or cracks. Pay special attention to ones that are placed in any high traffic areas or under rugs and carpets.

Make sure that the wattage of the bulbs is compatible with the fixture requirements. If you find any bulbs with a higher-than-recommended wattage rating, replace them immediately. It’s also important to ensure they don’t overheat and that they are screwed-in securely.

These should never be used on a permanent basis. Use ones that have safety enclosures to protect kids from burn injuries and shock.

There should be GFCIs installed in the kitchen, bathrooms, garage, basement and various other indoor and outdoor outlets in your home. Test these on a monthly basis to ensure they are working as required.

Only older properties have fuse boxes and these don’t have the capacity to withstand the heavy electrical loads required by modern-day equipment and appliances. It’s far better to get these older systems evaluated by a skilled electrician and replace them with modern circuit breakers.

Faulty or old wiring is one of the commonest causes of residential electrical fires in Australia. Get these checked periodically for loose connections, loose wall fixtures or wall receptacles. If you hear any hissing, sizzling or popping sounds behind walls or from sockets, call in your local electrician without delay to get these installations inspected and replaced. If you find that any switches or electrical fixtures are hot to the touch, get those checked as well. Flickering light bulbs are another indication of problems in the electrical wiring as well and it’s best to get a thorough check conducted.

If you find that a specific circuit breaker trips repeatedly, or you experience shock when you touch it, you should unplug it immediately and get it replaced or repaired. Check for damage or cracks in the connectors and wiring and install surge protectors to protect all your expensive electronics.

When you upgrade your home, make additions or add extensions like extra rooms or an extra storey etc., or even add a large number of new equipment or electrical appliances to your home, that can overburden the existing electrical installations. At this point you would have to increase the service capacity of your home’s electrical system.

We are a company that has been operating in this space for a number of years and have the skill, knowledge as well as the resources to install, maintain and upgrade all types of electrical installations on your residential or commercial premises. For more information, contact the Allround Electrical team at this number – 1300 169 263. Alternatively, you can write to us at our email address.

Thanks for reading,1300 169 263

Cordless tools have been around for decades, but the technology is constantly evolving. They offer portability, convenience, and access to a wide ranges of devices to make any project go smoothly.

Overall, Milwaukee stands out as having the highest quality tools, but at a much bigger cost. DeWalt offers reasonable quality at a good price, while Makita features truly unique options. If you already own a certain brand of tools, the best advice is to stick with that brand. DeWalt tools are generally the best value per dollar, while Milwaukee is best for heavy-duty or high-demand applications. Many professionals simply try these tools out till they find the brand they prefer, then stick with that brand for all their tool needs.

A solar energy system is designed to take the radiation from the sun, a totally renewable resource and turn it into electricity that can be used to power all of your electrical devices, such as computers, televisions, refrigerators and lights. Each solar cell will take the photons generated by sunlight and convert them into electricity. Regardless of the size and application of the solar panels being used, there are a few basic components that are necessary to turn this energy into a readily available and easily used electricity. Though the solar panels are the core of the system, these components are needed to complete the system.

Solar Panels: A solar panel is the array of photovoltaic cells that are used to convert the sunlight into direct current.

Rooftop Racking: This is the framework that is attached to your roof in order to give your solar panels the stability that they need. This is one of the most important parts of any solar panel installation.

Utility Meter: This component of your solar energy system integrates directly with your existing electrical system. After the solar installers have completed the installation of your solar power system, the utility meter will track the amount of electricity that you generate in excess of what you consume. This electricity is typically fed back into the power grid, helping you to earn credits on your electrical bill.

Batteries: The electricity that is generated from a solar panel is available for immediate use. In order to store this electricity for future use, it must be stored in a battery array.

Power Inverters: Although your solar panels generate and convert your electricity, you must have a power inverter in order to convert the power from DC to AC.

If you are interested in learning more about solar panels, start by browsing our solar power website. You can learn more about how much solar panels cost and the different options you have for purchase, leasing and more.

Clearance Sale –Up to 70% off of Overstock, Brand Name Lighting

Shop clearance lighting and get up to 70% off of overstock, brand name lighting at Capitol Lighting retail showrooms and 1800lighting.com! Throughout the year our top brands are making available exclusively to Capitol hundreds of top selling overstock and clearance lighting. We are thrilled to be offering these items to our Capitol Lighting customers at discounts as steep as 70 percent off! Quantities are limited on all items tagged as clearance lighting and are available while supplies last. Find clearance lighting at unbeatable prices every day in our showrooms and online and save big on brand name lighting from top manufacturers. No need to sacrifice quality for cost when you shop clearance lighting at 1800lighting.com.

Shop ceiling fans, outdoor lighting and so much more in our clearance section online. Overstock and clearance lighting is sold as FINAL SALE and are not eligible for return.

See complete Product Return Information for Details.

The controller keeps on monitoring the application requirement in a continuous control loop. It then commands the inverter to produce the required voltage and frequency to meet the application requirements. To do this, the controller, comprised of a microprocessor, takes the input signal from the sensor and compares this with a reference signal. It then generates the appropriate control signal for the inverter to vary its output power.

In a typical application, the controller will monitor process parameters such as pressure, flow rate, temperature or liquid level. For example, an oxygen sensor in a boiler provides a signal to adjust the speed of the fan and control the amount of oxygen in the boiler system.

Today’s drives, using microprocessors, semiconductor power switches, and SMDs are now smaller, compact, cheaper, more reliable and efficient. A typical drive will also include a filter to suppress harmonics generated when converting the DC to AC voltage.