Have you ever walked into your kitchen and tried to use the toaster only to discover it had been unplugged. Then you remember you unplugged it because you needed to use the can opener and didn’t want to unplug the Crockpot, interrupting your dinner. If you have ever experienced anything like this, then you probably need the help of an electrician in Pasadena, like those at The Electric Connection. Stop the frustration by having an electrician install additional outlets in your kitchen.

Older homes that have been renovated and made more modern tend to overlook the outlet situation in the kitchen. Fifty years ago, kitchen appliances were very minimal or considered a major luxury. In today’s world, we can’t make coffee or open a can of beans without an electrical outlet. With all the lovely appliances available today that make our lives easier, it is only normal we would want the power to use them.

You can remedy the situation with the help of an electrician. Pasadena residents can transform their kitchen into a space that works for them by having additional outlets installed. Before this can happen, the electrician will need to check out the existing electric panel to determine whether or not the current breaker can support more outlets. In most cases, an additional breaker may be needed to support the outlets. This is something an electrician can take care of for you. When it is time to install the new outlets, it is a good idea to have the electrician replace the old outlets in the kitchen with GFCI outlets. These are the standard in new home construction in the kitchen and bathroom areas. They prevent electric shock if water is splashed on an appliance. If you are ready to make your kitchen start working for you, give The Electric Connection a call today.

If you live in an area where power outages are, unfortunately, quite common, you know just what an annoyance they can be. Sometimes, homeowners have portable generators they can plug a few appliances into so that they can stay at home. But for some longer outages, families have to leave their homes.

An automatic standby generator can power your whole house automatically! We recommend this to anyone who’s ever had to put up with a days-long outage, or for those who worry they one day will.

Portable generators can be useful during a power outage, but not for long. Fuel capacity is limited and depends on how much you can store at your home. The number of lights and appliances a generator can power is very limited, especially for larger homes and households.

Automatic standby generators use a transfer switch to detect a loss of current flow and automatically restore power to your entire home. You won’t have to do a thing!

Yes, a generator can cost a lot of money upfront. But the good news is that you’ll have it in your home for many, many years. It pays for itself if you save on losing refrigerated items, spending money on fuel and battery-powered appliances, or even hotel costs from moving out of the home for a day or even weeks.

Your home is a lot safer when you have a whole-house generator to protect it from flooding, burst pipes, and other issues. Keep the heat on to protect your pipes, continue operating your sump pump, and know that your home is safe.

In many cases, being without power for too long can actually lead to major safety hazards. Going without lights can be dangerous, particularly if you have kids or elderly family members. And many people with health issues can’t get by for long without heating or air conditioning—or without lifesaving medical equipment.

constant-current LED driver or constant-current driver is used to regulate the amount of current that is supplied to an LED or LED array to maximize LED lifetime. If current is not regulated, LED brightness can fluctuate and life span can be shortened. The constant-current driver is used for LEDs or light fixtures that require a stable output current and operate within a range of voltages. Most finished LED products already have a constant-current driver or resistors to regulate current. If you’re building an LED fixture or replacing a constant-current driver, it’s important to verify that the output current and voltage of the driver is compatible with the LEDs’ current and voltage. If your LED product already has a constant-current driver or uses resistors in the LED array, you might need a constant-voltage power supply.

If your LEDs are dimmable and you want to change their brightness, choose a Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton.

Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10-volt signal level with a frequency between 100Hz-3KHz. The MLD-5A are compatible for this application.

Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as 12-Volt Mean Well HLG-40-240 Series or 12-Volt Mean Well HLG-600 Series or here.

The efficiency of a power supply or driver indicates the percentage of power that goes toward making your LED product function. An efficiency of 80 percent or higher is recommended for operating LEDs. 

When choosing a driver or power supply, the size of an LED product’s housing or area of installation is important. If you wish to put a constant-current LED driver inside of a product, the driver must be small enough to fit in the product’s housing. Similarly, if the driver or power supply is used outside of the product’s housing, it should fit the area of installation. Drivers and power supplies are available in a variety of sizes to suit your needs.

A Class 2 driver or power supply is in accordance with limited power levels defined by the National Electric Code (NEC) and fulfills the requirements of Standard UL 1310. Output is limited to 60 volts DC and 100 watts. Because power sources with this rating have limited output, it might not be possible to power as many LEDs or lights as those that don’t have a Class 2 rating. However, these power supplies and drivers provide protection from fire and electric shock.

A Class II rating refers to a double insulation layer between AC input and DC output wires. These drivers and power supplies do not require a ground connection.

Do you have a smart phone? What about a smart watch? Tablet? Laptop computer? Backup battery? Each of these devices needs frequent charging, which means the charger will take up a precious electrical outlet somewhere in your home for hours at a time, and could prevent you from having to plug in something else that you may need. What’s worse, what happens when you lose your charger and are left with nothing more than a typical USB cable? You can’t plug that into the wall, so what good will it do?

Well, that’s not exactly true anymore. In recent years, because the USB platform has become so popular for smartphone and other device charging, electrical component companies have begun to make wall sockets with USB plugs already built in! These combo outlets give you the best of both worlds, allowing you to plug in your devices with a regular USB cable while keeping your electrical sockets open for additional plugs.

A USB combo outlet is remarkably simple, and can be retrofitted to fit nearly any already-existing outlet. Essentially the two electrical outlets are exactly the same, but they also have two USB outlets squished right in between them. When the electricity is fed to the outlet, it also feeds directly into a step-down circuit, which brings the voltage down from 110 volts to about five, which is the standard for that particular plug technology.

The other benefit is you don’t have to worry about a large or bulky charger potentially blocking up the other outlet. While most manufacturers have gotten pretty good about keeping their wall chargers small, some larger units can take up a big chunk of space on your wall, potentially hindering access to the other charging unit. Getting rid of these units entirely and charging off a USB port keeps both plugs free and open for other uses.

Think something like this would be far too expensive? Think again. The average cost of a USB wall socket is generally anywhere between $10 and $25 each, making them remarkably cost-effective. When you consider you don’t usually need any more than three to four of these outlets, you can make this switch for at most about $100.

That is, provided your home can support these new devices. A wall outlet sits inside a small metal case that’s mounted inside your wall, known as a junction box. Most modern junction boxes are fairly large, and upgrading to these new outlets isn’t a big issue. But some older homes were built with smaller junction boxes that won’t be able to fit the increased size of a USB outlet, which is normally roughly twice as deep as a traditional standard outlet.