If the department stores are to be believed, the holiday season started about a month ago—which means if your house isn’t already fully decorated, you’re way behind! This year, make sure your holiday lights are safe by following these tips:

Before you buy or install new lights, make sure you know both how many watts the decorations require and how many watts are available in your home (if you’re not sure, ask an electrician at Kolb Electric!). Remember—the lower the wattage, the less electricity your lights will consume and the less they will cost to operate.

Since holiday lights draw so much power, you probably don’t want to plug them into a circuit that you’re using for other appliances—the circuit is likely to blow. Instead, call a DC electrician to install a dedicated circuit for your decorations.

In addition to installing a dedicated circuit for your holiday lighting, you may also want to install a timer for your lights. A timer will shut off your lights automatically, adding security and making sure everything is off in the middle of the night.

Extension cords are susceptible to water damage, so if you plan to use any outside, make sure they are covered so they can’t get wet. Never connect more than three strings of lights either—if you need more length, use a different plug.

Above all, make sure you take ordinary precautions with your holiday lights. This includes:

At Kolb Electric, we want to wish everyone a happy and safe holiday season. And if you need electrical service in Washington, DC, Maryland, or Virginia, call Kolb Electric today!

Two atoms were walking down the street one day, when one of them exclaimed, “Oh no – I’ve lost an electron!” “Are you sure?” the other one asked. “Yes,” replied the first one, “I’m positive.”

I have heard that joke at least ten times and it is still over my head. Maybe it all boils down to the way I view things, usually on a more metaphysical level, or as my sister would say, “out there and far fetched.” I totally understand the idea behind quantum physics; the idea that a researcher’s views and expectations influence the outcome of their experiments makes total sense. It gives those scientists power over what they do. On the other hand, when it comes to comprehending electricity, I just get lost. The subject is so hard to grasp; the only thing I know for sure is that I am very dependent on it. It seems to have all the power, no pun intended. I challenge you to gain better knowledge than I have in the journey that takes you around in a circle between the words electric, electric charge and electricity, each one’s definition leading back to the others.

Thank goodness for those who understand what I don’t. Another subject that seems to be connected to electricity, but don’t ask me to explain, is the internet. All I had to do to find an electrician in Beverly Hills, was search for “electrician Beverly Hills CA” and some sort of “feelers” out there in a hidden territory gave me The Electric Connection. To me it does not seem so far fetched that in a few years I may only have to think “electrician Beverly Hills” and one will show up at my door. Shoot – that was almost what happened, now that I think about it. The only difference was the inclusion of a phone call.

When the Beverly Hills electrician from The Electric Connection finished his work at my home the next day, I knew that he understood this complex subject. He probably gets the internet too. I did not end up with funny shoes or new exercise equipment, but I do have new electrical outlets, two ceiling fans installed and some landscape lighting that I have wanted for ages. This electrician in Beverly Hills even did his best to explain electricity to me, which included what he knew about electric eels. I am sure he noticed the glazed look on my face, but at least he tried.

There is just so much to learn here in one short life, or even in several for that matter. I have learned that we cannot be experts at everything, but we can sure appreciate those who are. I may not know fully understand electricity or cyberspace, but I do know great customer service when I see it, which is exactly what everyone should expect from their local Beverly Hills electrician.

Click here to visit our website.

pursue electric lights.

A Timeless StyleIn the post-Victorian era, brass chandeliers shimmered with crystal drops and porcelain lamps were embellished with colorful floral themes. For members of the British aristocracy, the early 20th century was a time of elegance, luxury and opulence.

A quick glance through the latest designer catalogs are ample evidence that the decor of previous eras are still hugely popular. The style can easily be recreated with antique brass desk lamps. In contemporary homes, an elegantly crafted modern light fixture can give you the look of the most treasured antique.

picture light would also do the trick.

Last month, I wrote via www.bet.com

2) A Dwarf Makes Giant News

Astronomers are given the spotlight as they announce that Pluto, the dwarf planet with a changing orbit, has passed Neptune to become the ninth planet from the Sun. It had been the eighth farthest since 1979. Of course, we now know that Pluto is not a planet at all but some kind of ball of rock and ice. 

 4) Re-imagining Literary History

Tom Stoppard and Marc Norman win the Writers Guild Award for SHAKESPEARE IN LOVE. Also nominated were Robert Rodat for SAVING PRIVATE RYAN and Andrew Niccol for THE TRUMAN SHOW.

6) You’re Still the One

Shania Twain wins a Grammy for Best Female Country Vocal Performance for “You’re Still the One,” in which the Twain passionately announces, “We’re still together, still going strong.”

9) Run to the Hills

Gloriously, and to the headbanging delight of metal heads across the globe, Iron Maiden announces that singer Bruce Dickinson has rejoined the band. 

11) The Tumultuous Days Continue for Kid Dynamite

Early in the month, Mike Tyson is sentenced to four years in prison for assaulting two motorists after a traffic accident in 1998. The judge gives him only one year of jail time, followed by two years of probation and a $5000 fine. Days after he begins his sentence at the Montgomery County Detention Center, he is put in solitary confinement for throwing a TV in the general direction of some guards. He is released from solitary after about six days.

13) Return Mail

TLC releases their third album, FANMAIL, after a five year hiatus. The new album sells 318,000 copies in its first week, and it becomes clear to the world that TLC “don’t want no scrubs.”

15) The Dawning of the Age of the File Share

The Artist Formerly Known as Prince makes headlines a second time as he files a lawsuit against nine websites for copyright and trademark infringement. He accuses websites of selling bootlegged recordings and offering unauthorized song downloads.

The jargon in the lighting world can often get mixed up. Color rending index (CRI) and color temperature are one of the most to be confused with each other. This post is going to clarify what the different between CRI and Color Temperature is so we can end this confusion.

Here is a short explanation why the CRI is more important to focus on before deciding for a color temperature. The color rendering index is the most important feature in certain applications as it determines the appearance of objects, faces and spaces. If this aspect is not relevant, the CRI can be as low as 60 or even 40.

The color rendering index (CRI) is a numeric evaluation of the light color accuracy with the reference of daylight (numbered 100). Sunlight and its broad spectrum will enable a person with normal vision to see 68 different colors in a color chart, but if the chart is illuminated by a light source of one wavelength only, each color from the color chart will appear as a different brightness of that one color. Some activities, such as walking or operating a vehicle, do not require the accurate perception of surface colors while others such as product selections in shops benefit from better color rendering features. Look at the application of the lighting installation. If the visual tasks are easy to perform the CRI doesn’t need to be high. In areas like offices, handcraft manufacturing and surgery, the requirements for visibility, contrast, visual guidance as well as face recognition need to be provided by a lighting system with a good CRI of >80 or even >90.

How much is the light color affecting the space? The term color temperature describes the temperature of objects by which they emit light, modeled through the “blackbody radiator”. When increasing the temperature of a “blackbody”, it starts to emit visible light in a continuous spectrum. The filament of a 60W incandescent lamp heats up to about 3000°F, as a result the lamp emits light with a color temperature of 3000K. Many of our artificial light sources do not create light by heating up a material until it glows like an incandescent lamps. Instead of creating a continuous spectrum, they generate an assortment of color emission lines. A blackbody color temperature cannot be directly given to this non-blackbody type of emission, generated by high intensity discharge and fluorescent lamps for example. For those light sources, a correlated color temperature (CCT) is indicated, based on the blackbody color temperature. A cool white fluorescent lamp has a CCT of about 5000K. The lamps light spectrum is different from a blackbody one but has the same temperature.

The light color influences the atmosphere in a space. The more cozy the ambiance the warmer the light color (lower color temperature) should be and the more dynamic the scene the cooler the light source (higher color temperature). The CRI is the most important factor to watch when choosing light sources. How good is the light source representing faces, colors and contrasts? The easier the visual task and perception the lower the CRI can be. The color temperature needs to be watched second, it is supporting the space’s atmosphere.

Conclusion

There you have it; an explanation of both the Color Rending Index and Color Temperature.

Have anymore questions or thoughts? Comment them down below!