Wouldn’t you like to keep your hard earned money in your pocket rather than pay it out on excessive electric bills? Californians get used to mild weather, but when those cold temps blow in, they are a real shock to the system. Your first reaction is to reach for the thermostat and crank it up. Unfortunately, if your home isn’t ready to ride out a cold snap, you could be paying double or triple what you really need to be to keep your home warm. These are some tips from your local electrician in Los Angeles to help retain the heat from your furnace in the home and save you money on your electric bill. The team at The Electric Connection is here to help.

• Spend some time adding weather stripping around your doors or windows. It is sold in a roll with self-sticking tape on one side. Simply peel and stick. This one little thing can block cold drafts from coming in as well as prevent your hot air from seeping out. During the summer, you can keep your air conditioned air in and the hot air out.

• If you have sliding glass doors or French doors, consider investing in heavy curtains. Again, these are great for the summer and winter months. You can block the cold by covering large windows with heavy curtains.

• Have your furnace or heat pump maintained. Keeping filters clean and the unit in good working order can save you a lot of money in repair costs as well as keep the unit operating in prime condition.

You don’t have to pay a lot for your Los Angeles electrical bill when you do these three simple things. You can reduce your heating and cooling bills by taking care of the little things around the house. If you have any more questions, give The Electric Connection a call today.

It is true that most of the electrical problems you have in your home will need to be taken care of by a licensed electrician. However, there are various smaller problems that you can easily and safely troubleshoot. Here are just a few:

This can be quite bothersome and yet pretty easy to troubleshoot. Begin by checking that the bulb has been screwed in correctly. It needs to be in all the way. If that is in order, check to see that the wattage is correct for the fixture in which it has been fixed. If the wattage is not right, that can be causing overheating and it can even lead to a fire. In the event that the wattage is correct, just replace the old bulb with a new one. If the light is still flickering, then it is possible that the electrical outlet or the cord has a problem.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.

Photo via Kickstarter.com

Bosua didn’t design this light with merely lethargy in mind – its technological advancements also have the potential to improve your wellbeing. Here are a few things you can do with the LIFX:

While some of these features may seem silly or impractical (I’m sure not everyone reading this has robot dance parties on the regular) I believe there are 2 notable features that make this LED worth a try:

1. Energy Savings. For the equivalent brightness of a 60W incandescent, this light only uses about 10 watts of energy. Plus, by programming it to turn off when you’re gone and dim automatically, you can save even more energy with minimal effort. The creators also say the LIFX will last up to 25 years, so you won’t need to replace them for a very long time.

2. Changing Colors. While at first, turning your lights from blue to red to green might seem a little superfluous, if you spend long periods of time indoors under the same white, bright lights, it can start to mess with your circadian rhythms. Studies like Photo via Kickstarter.com

And if you ever lose your phone, don’t worry, because these lights still work with standard switches too.

The LIFX project is funded through Kickstarter, and light bulbs will start shipping in March of 2013.